期刊論文(Refereed Journal Papers) 

1. Y.C. Chiou , K. Kato, T. Kayaba,1985, Effect of normal stiffness in loading system o­n wear of carbon steel-part 1: Sever-mild wear transition, Trans. ASME, Journal of Tribology, Vol.107, pp. 491-495.( SCI )

2. Y.C. Chiou , K. Kato, T. Kayaba,1986, Effect of normal stiffness in loading system o­n wear of carbon steel, part 2: Dynamic normal load and effective sliding distance, Trans. ASME, Journal of Tribology, Vol.108, pp. 321-325. 
( SCI )

3. Y.C. Chiou , K. Kato, H. Abe,1987, The effect of normal damping in the loading system o­n the wear of low carbon steel, Wear, Vol.114, pp.73-84. ( SCI )

4. 邱源成 、加藤康司 ,1987, 鋼同士の乾燥すべり摩擦における微小切削型摩耗（第 1 報） – 試驗片のアタック角度の影響, 日本潤滑學會期刊 , 第 32 卷 , pp. 41-48 。 J. JSLE, International Edition, Number 9 （ 1988 ）pp.11-16. 

5. 邱源成 、加藤康司 ,1987, 鋼同士の乾燥すべり摩擦における微小切削型摩耗（第 2 報） – 試驗片の取付け位置と接觸幅の影響, 日本潤滑學會期刊 , 第 32 卷 , pp.49-55 。 J. JSLE, International Edition, Number 9 （1988 ） pp.17-22.

6. Y.C. Chiou , J.C. Ho, 1990, Investigation of lubrication mode and wear scar diameter in a four-ball tester with contact resistance instrument（part 1） :effects of normal load and sliding velocity, J. CSME, Vol.11, pp.349-358.(SCIE)（中國工程師學會工程論文獎,中國機械工程學會年會論文獎）

7. J.C. Ho, Y.C. Chiou , 1990, Investigation of lubrication mode and wear scar diameter in a four-ball tester with contact resistance instrument ( part 2 ): effect of viscosity, J. CSME, Vol.11, pp.359-367. ( SCIE )

8. Y.C. Chiou , 1991, Study of wear particle deposition by an improved rotary ferrographic analyzer, Wear,Vol.146, pp.137-147.( SCI )

9. Y.C. Chiou , J.R. Hwang, 1991, Relationship between the propagation of fatigue cracks and the behaviour of plastic flow under rolling/sliding contact-effect of slip ratio, Tribology International, Vol.24, pp.101-107. ( SCI )

10. Y.C. Chiou , R.T. Lee, Y.A. Chang , W.F. Kuo, 1992, Fundamental characteristics of wear prticle dposition by an improved ferrographic analyzer, Wear, Vol.155, pp.285-295.( SCI )

11. Y.C. Chiou , R.T. Lee, J.H. Chang, 1993, Relationship between the propagation of fatigue cracks and behaviour of plastic flow under rolling/sliding contacts-effect of load, The Chinese Journal of Mechanics, Vol.9, pp.17-25.（SCI）

12. W. F. Kuo, Y. C. Chiou , R. T. Lee, 1994, The analysis of magnetic field and the behavior studies of wear debris deposition for the stationary ferrographic analyzer, J. CSME, Vol.15, pp.563-571.（SCI）

13. C.R. Yang, Y.C. Chiou , R.T. Lee, 1995, Study o­n positioning accuracy of reciprocating friction drive system, Wear, Vol.189, pp.58-65, （SCI）

14. W.F. Kuo, Y.C. Chiou , R.T. Lee,1996, A study o­n lubrication mechanism and wear scar in sliding circular contact, Wear, Vol.201, pp.217-226, （SCI）

15. R.T. Lee, C.R. Yang, Y.C. Chiou , 1996, A procedure for evaluating accuracy of reciprocating friction drive system, Tribology International, Vol.29, pp.395-404.（SCI）

16. R.T. Lee, Y.C. Chiou , T.T. Lai, K. Ting, 1996, A study of static and dynamic characteristic of hydrostatic journal bearing in reciprocation pump using multigrid technique, Nuclear Science Journal, Vol.33, pp.8-25. (EI)  (核能學會論文獎）

17. C.R. Yang, R.T. Lee, Y.C. Chiou , 1997, Study o­n dynamic friction characteristics in reciprocating friction drive system, Tribology International, Vol.30, pp.719-731. （SCI）

18. W.F. Kuo, Y.C. Chiou , 1997, Fundamental characteristics of wear particle deposition by an improved o­n-line ferrographic analyzer, Wear, Vol.208, pp.42-49. （SCI）

19. Y. C. Chiou , R. T. Lee, J. Y. Tasy, 1998, An o­n-line hall-effect device for monitoring particle in oils, Wear, Vol.223, pp. 44-49. (SCI) 

20. R. T. Lee, Y. C. Chiou , J. H. Chang, 1998,  Effect of pre-loading operation o­n fatigue life of lubricated rolling/sliding contact, Wear, Vol.217, pp. 95-103. (SCI)

21. R. T. Lee, Y. C. Chiou , J. H. Chang, 1999, Study o­n slip displacement and stick-slip characteristics in reciprocating friction drive system, Tribology International, Vol.32, pp. 97-106.　(SCI) 

22. Y. C. Chiou , R. T. Lee ,C. M. Lin, 1999, Formation criterion and mechanism of electrical pitting o­n the lubricated surface under AC electric field, Wear, Vol. 236, pp.62-72． (SCI) 

23. C. R. Yang, Y. C. Chiou , R. T. Lee, 1999, Tribological behavior of  reciprocating friction drive system o­n the lubricated contact, Tribology International, Vol.32, pp. 443-453. (SCI)

24. Y. C. Chiou , R. T. Lee ,Y. C. Lin, 2000, Fundamental study o­n tribological characteristics of reciprocating friction drive system and its application, J. CSME, Vol. 21, pp.567-576. (SCIE) 

25. H. H. Chung , R. T. Lee , Y. C. Chiou , 2001, Arc erosion behavior of silver electric contact in a single arc discharge between static gap, IEE Proc. Sci. Meas. Technol., Vol.148, pp.8-14. (SCI) 

26. C. M. Lin ,Y. C. Chiou , R. T. Lee, 2001, Pitting mechanism o­n the lubricated surface of babbitt alloy/bearing steel pair under AC electrical field, Wear, Vol.249, pp.133-142. (SCI) 

27. H. H. Chung , R. T. Lee, Y. C. Chiou , 2002, Erosion mechanism of silver in a single arc discharge across a static gap, IEE Proc. Sci., Meas.Technol., Vol.149, pp.172-180. (SCI) 

28. R.T. Lee, H.M. Chu ,Y.C. Chiou , 2002, Inverse approximation for calculating pressure distribution in elastohydrodynamic lubrication, Tribology International, Vol.35, pp.809-817. (SCI) 

29. Y.C. Chiou , Y.P. Chang, R.T. Lee, 2003, “Tribo-electrification mechanism for self-mated metals in dry severe wear process —part1: pure hard metals”, Wear, Vol.254, pp.606-615. (SCI)

30. Y.C. Chiou , Y.P. Chang , R.T. Lee, 2003, “Tribo-electrification mechanism for different elf-mated metals under dry reciprocating friction—part2: pure soft metals”, Wear, Vol.254, pp.616-624. (SCI)

31. R.T.Lee, H. M. Chu, Y.C.Chiou ,2003, Inverse approach for estimating pressure and viscosity in elastohydrodynamic lubrication of circular contacts, Proc. Instn. Mech. Engrs, Part J: J. Engineering Tribology, Vol.217, pp.277-288. (SCI) 

32. H.M. Chu,R.T.Lee , Y.C.Chiou , 2004, Inverse approach for calculating pressure and viscosity in pure squeeze EHL motion of circular contacts, Tribology International,Vol.37, pp.375~384. (SCI)

33. Y.P.Chang, Y.C.Chiou , R.T.Lee, 2004, Transition mechanism of tribo-electrification for self-mated metals in dry severe wear process, Wear, Vol.257, pp.347~358. (SCI)

34. C.M.Lin, Y.C.Chiou , R.T.Lee, 2004, Effect of MoS₂ additive o­n electrical pitting mechanism of lubricated surface for Babbitt alloy/bearing steal pair under AC electric field, Wear,Vol.257, pp.833-842. (SCI) 

35. H.M. Chu, R.T. Lee, Y.C. Chiou, 2004, Study o­n pure squeeze lastohydrodynamic lubrication motion using optical interferometry and the inverse approach, Proc. Instn. Mech. Engrs, Part J: Journal of Engineering Tribology, Vol.218, pp.503-512. (SCI) 

36. C.R. Yang, P.Y. Chen, C.H. Yang, Y.C. Chiou , R.T. Lee, 2005, Effects of mechanical agitation and surfactants additive o­n silicon anisotropic etching in alkaline KOH solution, Sensors and Actuator A, Vol.119, pp.263-270. (SCI)

37. C.R. Yang, P.Y. Chen, C.H. Yang, Y.C. Chiou , R.T. Lee, 2005, Effects of various ion-typed surfactants o­n silicon anisotropic etching properties in KOH and TMAH solution, Sensors and Actuator A, Vol.119, pp.271-281. (SCI)

38. R.T. Lee, Y.C. Hwang , Y.C. Chiou , 2006, Lapping of ultra-precision ball surfaces part I: concentric V-groove lapping system, International Journal of Machine Tools and Manufacture,Vol.46, pp.1146-1156. SCI)

39. R.T. Lee, Y.C. Hwang , Y.C. Chiou , 2006, Lapping of ultra-precision ball surfaces part II: eccentric V-groove lapping system, International Journal of Machine Tools and Manufacture, Vol.46, pp.1157-1169. (SCI)

40. H.M. Chu, R.T. Lee, Y.C. Chiou , 2006, Inverse approach for estimating rheological haracteristics of adsorption layer in thin film EHL contacts, Tribology International, Vol.39, pp.50-59. (SCI)

41. Y.C. Chiou , R.T. Lee and C.L.Yau, 2007, A novel method of composite electroplating o­n lap in lapping process, International Journal of Machine Tools and Manufacture, Vol.47, pp.361-367 (SCI)

42. Y.P. Chang, Y.C. Chiou , R.T. Lee, 2008, Tribo-electrification mechanisms for dissimilar metal pairs in dry severe wear process—part I: speed effect, Wear, Vol.264, pp.1085-1094. (SCI)

43. Y.P. Chang, Y.C. Chiou , R.T. Lee, 2008, Tribo-electrification mechanisms for dissimilar metal pairs in dry severe wear process—part II: load effect, Wear, Vol.264, pp.1095-1104. (SCI)

44. Y.M.Hwang, Z.W. Kang, Y.C. Chiou , H.H. Hsu, 2008,  Experimental study o­n temperature distributions within the workpiece during friction stir welding of aluminum alloys, International Journal of  Machine Tools and Manufacture, Vol.48, pp.778-787. (SCI)

45. M.J. Hwang, C.R. Yang, Y.C. Chiou , R.T. Lee, 2008, Fabrication of nanoporous antireflection surfaces o­n silicon, Solar Energy Materials & Solar Cells, Vol.92, pp.1352-1357. (SCI)

46. Y.C. Chiou , R.T.Lee,S.M.Lin, 2009, Formation mechanism of electrical damage o­n sliding contacts for steel pair under DC electric field, Wear, Vol.266, pp.110-118. (SCI)

47. R.T. Lee, Y.C.Hwang, Y.C. Chiou , 2009, Dynamic analysis and grinding tracks in the magnetic fluid grinding system, part 1: effects of load and speed, Precision Engineering, Vol.33, pp.81-90. (SCI)

48. R.T. Lee, Y.C.Hwang, Y.C. Chiou , 2009, Dynamic analysis and grinding tracks in the magnetic fluid grinding system, part 2: the imperfection and ball interaction effects, Precision Engineering, Vol.33, pp.91-98. (SCI)

49. T.J. Chen, Y.C. Chiou, R.T. Lee , 2009, Grinding characteristics of diamond film using composite electroplating in-process sharpening method,  International Journal of  Machine Tools and Manufacture, Vol.49, pp.470-477. (SCI)

50. M.J. Hwang, C.R.Yang, R.T. Lee, Y.C. Chiou , 2009, Fabrication of a fuel cell electrode with a high-aspect-ratio nanostructure array, Journal of Micromechanics and Microengineering, Vol.19,pp.045003(7pp).(SCI)

51. T.J. Chen, R.T. Lee, Y.C. Chiou, 2010, Sharpening mechanism using composite electro-plating in-process sharpening technique, Advanced Materials Research, Vols. 126-128, pp 633-638. (EI)

52. Y.C. Chiou, R.T. Lee, T.J. Chen , 2010, Fabrication technologies of micr-probes, Chinese Institute of Engineers, Vol.83, No.6, pp.92-99.

53. M. J. Huang, C. R. Yang, C. M. Chang, C. T. Lin, Y. H. Tang, M. H. Shiao, Y. C. Chiou, R. T. Lee, 2011, PMMA nanocolumn array fabricated by catalytic etching and nanomolding techniques, Microelectronics Engineering, Vol.88, pp. 2576-2579. (SCI)

54. Y.C. Chiou, R.T. Lee, J.M. Chiou, T.J. Chen , 2012, Fabrication of high aspect ratio micro-rod using a novel electrochemical micro-machining method, Precision Engineering, Vol.36, pp. 193–202  (SCI) ( SciVerse ScienceDirect's Top 25 Hottest Articles )

55. R.T. Lee, C.T. Liu, Y.C. Chiou , 2012, Experimental investigations on the feeding force and its formation mechanism during friction stir welding of aluminum alloy using a novel dynamometer, J. CSME, Vol.33, pp. 11–19. (SCIE)

56. R.T. Lee, C.T. Liu, Y.C. Chiou, H.L. Chen, 2013, Effect of nickel coating on the shear strength of FSW lap joint of Ni-Cu alloy to low-carbon steel using shoulder tool, Journal of Materials Processing Technology, Vol. 213, pp. 69–74. (SCI) ( This article has been viewed and/or downloaded 359 times on ScienceDirect during Aug. to Dec. 2012 )

57. T.J. Chen, R.T. Lee, Y.C. Chiou, 2013, Finish machining of the mirror-like surface of CVD diamond film using a composite electro-plating in-process sharpening method, Proc. Inst. Mech. Eng. Part B - Journal of Engineering Manufacture, Vol. 227, pp. 1596 – 1606.(SCI)

58. Y.C. Chiou, C.T. Liu, R.T. Lee, 2013, A Pinless Embedded Tool Used in FSSW and FSW of Aluminum Alloy, Journal of Materials Processing Technology, Vol.213, pp. 1818-1824.(SCI) ( This article has been downloaded or viewed 586 times since publication (measured through 31 October, 2013).

59. R.T. Lee, K.T. Yang, Y.C. Chiou, 2013, A Novel Model for a Mixed-Film Lubrication with Oil-in-Water Emulsions, Tribology International, Vol. 66, pp. 241-248. (SCI) ( This article has been downloaded or viewed 369 times since publication (measured through  November 30, 2013).

60. M.J. Hsieh, Y.C. Chiou, R.T. Lee, 2015, Friction stir spot welding of low-carbon steel using an assembly-embedded rod tool, Journal of Materials Processing Technology, Vol. 224, pp. 149 -155. (SCI) ( This article has been downloaded or viewed 366 timessince publication measured through August 27, 2015).

61. R.T. Lee, K.T. Yang, Y.C. Chiou, 2016, Mixture lubrication with emulsion in cold rolling”, Tribology Transactions, Vol. 59, pp. 748–757. (SCI) 

62. M.J. Hsieh, R.T. Lee, Y.C. Chiou, 2017, Friction stir spot fusion welding of low-carbon steel to aluminum alloy, Journal of Materials Processing Technology, Vol. 240, pp. 118–1257. (SCI)

63. S.K.C. Tsai, H.T. Tsai, Y.C. Chiou, R.T. Lee, C.Y. Wu, 2017, Welding of pure copper with thick plate by using Friction stir welding method, Welding & Cutting, Vol.27, No.3, pp. 52-56.

64. Y.C. Chiou, R.T. Lee, H.T. Tsai, K.C. Tsai, 2017, Studies on the Friction Stir Welding Characteristics of Pure Copper Plate with 15 mm Thickness, Journal of Chinese Society of Mechanical Engineering, Vol.38, No.6, pp. 605–612.(SCIE)

65. R.T. Lee, Y.C. Chiou, Y.W. Chen, S.L. Wang, 2017, An approach in evaluating adsorbed layer thickness for EHL using oil-in-water emulsions, Journal of Chinese Society of Mechanical Engineering, Vol.38, No.6, pp. 613–619. (SCIE)

66. Y.C. Chiou, R.T. Lee, P.H. Lin, C.Y. Wang, 2018, Development of Online Automatic Detection Device of Ferrous Debris Concentration in EDM Fluid, Journal of Taiwan Society of Electrical Machining Engineers, December. 2018, pp. 9-14.