跳到主要內容區

Top

期刊論文(王郁仁老師)

期刊論文

  1. Y. J. Wang*, C. Yang, C. Y. Sue, Y. T. Wang, “Analysis of a 0.1-μm stepping bi-axis piezoelectric stage using a 2-DOF lumped model”, Microsystem Technologies, https://doi.org/10.1007/s00542-019-04511-2 (2019). (SCI, IF= 1.581, Engineering Electrical: 147/260)
  2. Y. J. Wang*, T. Y. Chuang, C. Lee, “Resonant frequency self-tunable piezoelectric cantilevers for energy harvesting and disturbing torque absorbing”, Sensors and Actuators A: Physical, 285 1 (2019) pp. 25-34. (SCI, IF= 2.311, Instruments: 19/61)
  3. Y. J. Wang*, C. H. Chen, C. Y. Sue, W. H. Lu, Y. H. Chiou, “Estimation of blood pressure in the radial artery using strain-based pulse wave and photoplethysmography sensors”, Micromachines, 9 11 (2018) pp. 556. (SCI, IF= 2.222, Instruments: 22/61)
  4. C. Lee, Y. J. Wang*, “A novel method to derive formulas for computing the wet-bulb temperature from relative humidity and air temperature”, Measurement, 128 (2018) pp. 271-275. (SCI, IF= 2.218, Engineering Multidisciplinary: 22/86)
  5. Y. B. Jiang, Y. J. Wang*, G. L. Lin, C. E. Weng, W. H. Lu, “An automatic feeding system with a linear piezoelectric actuator, driving circuit and position sensors”, Microsystem Technologies, 24 4 (2018) pp. 1909-1917. (SCI, IF= 1.581, Engineering Electrical: 147/260)
  6. T. H. Tran, Y. J. Wang, C. K. Cheng, P. C.-P. Chao*, C. C. Wang, “Using maximum likelihood to calibrate a six-DOF force/torque sensor”, Microsystem Technologies, 24 11 (2018) pp. 4493-4509. (SCI, IF= 1.581, Engineering Electrical: 147/260)
  7. C. C. Lin*, G. H. Lee, Y. J. Wang, “Design and fabrication of gypsum mold for injection molding”, Journal of the Chinese Institute of Engineers, 41 2 (2018) pp. 160-167.
  8. Y. J. Wang*, T. Y. Chuang and J. H. Yu, “Design and Kinetic Analysis of Piezoelectric Energy Harvesters with Self-adjusting Resonant frequency”, Smart Materials and Structures, 26 1 (2017) 095037. (SCI, IF= 2.769, Instruments: 5/56)
  9. C. Lee*, Y. J. Wang, “Psychrometer based on a contactless infrared thermometer with a predictive model for water evaporation”, Biosystems Engineering, 160 (2017) 84-94 (SCI, IF= 1.997, Agriculture engineering: 7/57)
  10. Y. J. Wang*, C. Lee, Y. B. Jiang, K. C. Fu, “Design and dynamic analysis of a piezoelectric linear stage for pipetting liquid samples”, Smart Materials and Structures, 26 6 (2017) 065004 (SCI, IF= 2.769, Instruments: 5/56)
  11. Y. J. Wang*, K. C. Fu, C. C. Wang, “A Smart Pinless Ejection Mechanism Using Dual-Resonance Excitation Langevin Piezoelectric Transducers”, Smart Materials and Structures, 25 1 (2016) 015014 (SCI, IF= 2.769, Instruments: 5/56)
  12. Y. J. Wang*, T. Y. Chen, M. C. Tsai, C. H. Wu, “Noninvasive blood pressure monitor using strain gauges, a fastening band, and a wrist elasticity model”, Sensors and Actuators A: Physical, 1 252 (2016) 198-208 (SCI, IF= 2.311, Instruments: 19/61)
  13. Y. J. Wang*, J. H. Yu, “Enhancement of rolling energy conversion of a boat using an eccentric rotor revolving in a hula-hoop motion”, Ocean Engineering, 116 (2016) 21-31 (SCI, IF= 1.488, Marine Engineering: 2/14)
  14. Y. J. Wang*, Y. C. Chen and S. C. Shen, “Design and Analysis of a Standing-Wave Trapezoidal Ultrasonic Linear Motor”, Journal of Intelligent Material Systems and Structures, 26 (2015) 2295-2303 (SCI, IF=1.975, Material science: 105/271)
  15. Y. J. Wang*, C. D. Chen, C. C. Lin and J. H. Yu, “A nonlinear suspended energy harvester for a tire pressure monitoring system”, Micromachines, 6 (2015) 312-327 (SCI, IF= 2.222, Instruments: 22/61)
  16. Y. J. Wang*, Y. T. Hao and H. Y. Lin, “Design of a weighted-rotor energy harvester based on dynamic analysis and optimization of circular Halbach array magnetic disk”, Micromachines, 6 (2015) 375-389 (SCI, IF= 2.222, Instruments: 22/61)
  17. Y. J. Wang*, C. D. Chen and Chien Li, “Design and analysis of a compact synthetic-jet-based air pump for large airflow”, Microsystem Technologies, 21 (2015) 1437-1446 (SCI, IF= 1.581, Engineering Electrical: 147/260)
  18. Y. J. Wang* and C. D. Chen, “Design and jump phenomenon analysis of an eccentric ring energy harvester”, Smart Mater. Struct., 22, 10 (2013) 105019 (SCI, IF= 2.769, Instruments: 5/56)
  19. Y. J. Wang*, C. D. Chen and C. K. Sung, “System design of a weighted-pendulum type electromagnetic generator for harvesting energy from a rotating wheel”, IEEE/ASME Transactions on Mechatronics, 18, 2 (2013) 754-763 (SCI, IF=3.652, Manufacture:1/39)

 

 

瀏覽數: