·       專利

1.        Hsieh, S.-S. and Wen, M. -Y., A Device for Measuring the Mass Fraction of Oil in the Refrigerants, ROC Patent (Invention No. 071407), 1987.

2.        Hsieh, S.-S. andWeng, C. -J., A New High Performance Rib Tube, ROC Patents (Innovation No. 842940), 1997.

3.        Hsieh, S.-S. Kuo, J. K., Huang, C. F., Tien, C. -H., Tsai, H. H., Lin, C. Y., and Yang, S. -H., Fuel Cell and Method for Manufacturing the Same , ROC Patents (Innovation No. 201888), 2004.

4.        Hsieh, S.-S., Lin, C.-Y. , Micro Heat Exchange Tube/Devices Structure and Method for Manufacturing the Same, ROC Patents (Invention No. I 408329), 2013.

·       專書

1.        Hsieh, S. -S., Editor, Proceedings of the 9th National Mechanical Engineering Conference, The Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, 1992, 4 volumes.

2.        Hsieh, S. -S., Editor, Proceedings of the 3rd National Heat Transfer Conference, The Chinese Society of Mechanical Engineers, Kaohsiung, Taiwan, 1995 (205 pages).

·       曾指導的碩士論文

1.        Chen, C. -C., Heat Transfer and Fluid Flow Analysis o­n Surface Rippling During Laser Material Processing, MS Thesis, National Sun Yat-Sen University, 1985.

2.        Han, W. -S., Thermal Correlation of Buoyancy Driven Fluid Flow for Air Layers in Vertical Annuli, MS Thesis, National Sun Yat-Sen University, 1986.

3.        Shih, H. -J., Numerical Computation of Laminar Separation and Reattachment of Flow Over Surface Mounted Ribs, MS Thesis , National Sun Yat-Sen University, 1988.

4.        Hong, Y. -J., Separating Flow over Repeated Surface Mounted Ribs in A Square Duct, MS Thesis, National Sun Yat-Sen University, 1988.

5.        Huang, H. -L., Transient Thermal Analysis of the Waterlines Effect in Die Casting Dies, MS Thesis, National Sun Yat-Sen University, 1988.

6.        Tzuoo, D. -C., Numerical Computation of Combined Buoyancy and Thermocapillary-Driven Convection in An Open Cylindrical Enclosure, MS Thesis, National Sun Yat-Sen University, 1988.

7.        Lin, S. -C., Numerical Simulation of Transfer Moulding for Thermosetting Materials, MS Thesis, National Sun Yat-Sen University, 1989.

8.        Lin, T. -Y., Mixed Convection of Opposing/Assisting Flows in Vertical Channels with Discrete Asymmetrically Heated Ribs, MS Thesis, National Sun Yat-Sen University, 1989.

9.        Wen, M.. -Y., Numerical Analysis of Solidification Thin-Walled Rectangular Enclosures of Different Aspect Ratios, MS Thesis, National Sun Yat-Sen University, 1989.

10.    Luo, S. -F., Laminar Forced Correction for Surface Mounted Ribs, MS Thesis, National Sun Yat-Sen University, 1989.

11.    Hou, Y. -S., An Experimental Study of Laminar Entrance Flow in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1990.

12.    Chou, W. -F., Augmentative Heat Transfer for a Vertical 2-pass Tube through an Air Box by Use of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1990.

13.    Kuo, N. -H., Analysis of Evaporation in the Presence of Composition/ Temperature Gradients Induced Natural Convection, MS Thesis, National Sun Yat-Sen University, 1991.

14.    Lin, C. -C., An Experimental Study of Laminar Entrance Flow and Heat Transfer in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1991.

15.    Kuo, M. -T., An Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger by Means of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1991.

16.    Jeng, S. -R., 3-D Laminar Forced Convection in a Rotating Square Duct with a Rib o­n Leading Wall, MS Thesis, National Sun Yat-Sen University, 1991.

17.    Lin, Y. -J., Fluid and Thermal Characteristics of Two Circular Cylinders Arranged in Cruciform, MS Thesis, National Sun Yat-Sen University, 1992.

18.    Zih, G. -M., Numerical and Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger, MS Thesis, National Sun Yat-Sen University, 1992.

19.    Wang, C. -Y., Experimental Study of Three-Dimensional Natural Convection in Enclosures with Different Working Fluids, MS Thesis, National Sun Yat-Sen University, 1993.

20.    Yang, S. -S., Transient Three-Dimensional Natural Convection in a Rectangular Enclosure, MS Thesis, National Sun Yat-Sen University, 1995.

21.    Liou, W. J., Uneven Wall Heat Flux Effect o­n Local Heat Transfer in Rotating Two Pass Channels with two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1995.

22.    Wang, Y. -S., Local Heat Transfer and Velocity Measurements in a Rotating Two-Pass Square Channel with Uneven Wall Temperatures, MS Thesis, National Sun Yat-Sen University, 1995.

23.    Chiou, C. -C., Pool Boiling Modeling o­n Rib-Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 1995.

24.    Lin, J. -C., Numerical Study of Turbulent Heat Transfer in a Circular Duct with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1995.

25.    Liu, M. -H., An Experimental Study of Turbulent Heat Transfer in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.

26.    Wu, F. -Y., An Experimental Study of Turbulent Flow and Pressure Drop in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.

27.    Chiang, M. -H., Velocity Measurements in a Rotating Two-Pass Square Channel with Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1996.

28.    Huang, I. -W., Laminar Heat Transfer and Flow Characteristics in a Horizontal Tube with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1997.

29.    Chen, P. -J., Velocity Measurements in a Rotating Two-Pass Square Channel with/ without Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1997.

30.    Chang, L. -C., A Numerical Study of Developing 3-D Turbulent Mixed Convection in a Circular Tube Inserted with Longitudinal Strips, MS Thesis, National Sun Yat-Sen University, 1997.

31.    Chin H. -J., Turbulent Flow in a Rotating Two Pass Channel with/ without Turbulators, MS Thesis, National Sun Yat-Sen University, 1998.

32.    Huang, M. -T., Evaporative Heat Transfer and Enhancement Performance of Serpentine Tubes with Strip-Type Insert with R-134a,MS Thesis, National Sun Yat-Sen University, 1998.

33.    Tsai, Y. -C., Evaporation Heat Transfer and Pressure Drop in Horizontal Tubes with Strip-Type Inserts using R-600a, MS Thesis, National Sun Yat-Sen University, 1999.

34.    Liu, C. -F., Impingement Cooling in a Rotating Ribbed Square Duct with Crossflow Effect from Different Arrays of Jets, MS Thesis, National Sun Yat-Sen University, 1999.

35.    Liao, H. -C., Local Heat Transfer and Pressure Drop in a Rotating Two-Pass Ribbed Rectangular Channel,MS Thesis, National Sun Yat-Sen University, 1999.

36.    Yang, T. -Y., Nucleate Pool Boiling from Coated and Spirally Wrapped Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2000.

37.    Tai, H. -H., Local Heat Transfer in Rotating Square Roughened Channels with Jet Impingement, MS Thesis, National Sun Yat-San University, 2001.

38.    Huang, G. -Z., Nucleate Pool Boiling Characteristics from Coated Tube Bundles in Saturated R-134a, MS Thesis, National Sun Yat-San University, 2001.

39.    Ke, C. -G., Bubble Dynamic Parameters Pool Boiling Transfer o­n Plasma Coated Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2001.

40.    Chou, S. -C., Impingement Cooling in a Rotating Square Smooth Channel Using Transient Liquid Crystal Techniques, MS Thesis, National Sun Yat-San University, 2002.

41.    Lai, W. -C., LDV Assisted Bubble Dynamic Parameters Measurements of Pool Nucleate Boiling in a Saturated R-134a from Plasma Coated Twin-Tubes, MS Thesis, National Sun Yat-San University, 2002.

42.    Chien, C. M., MEMS Fabrication and Study of a Microchannel Gas Flow, MS Thesis, National Sun Yat-San University, 2002.

43.    Wang, I. T., Simulation of Gaseous Flow in a Microchannel, MS Thesis, National Sun Yat-Sen University, 2003.

44.    Fan, T. -C., A Study of Liquid Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2003.

45.    Lin, C. -Y., Flow Visualization and Velocity Measurement in a Liquid Microchannel, MS Thesis, National Sun Yat-SenUniversity , 2004.

46.    Huang, C. -F., Fabrications of Micro Heaters and Micro Sensors, MS Thesis, National Sun Yat-SenUniversity , 2004.

47.    Kao, J. -K., Design and Microfabrications for Micro PEMFCs, MS Thesis, National Sun Yat-SenUniversity , 2004.

48.    Ling, H.-C., Electroosmotic Flows in a Square Microchannel, MS Thesis, NationalSunYat-SenUniversity, 2005.

49.    Yang, S.-H., Design, Fabrication and Electrochemical Impedance Spectroscopy for Microfuel Cell, NationalSunYat-SenUniversity, 2005.

50.    Tien, C.-H., R-134a/Distilled Water Spray Droplets Size(d32) Distribution and Velocity Temperature Measurements, NationalSunYat-SenUniversity, 2005.

51.    Liu, C.-H., Stretching and Deforming DNA Molecules in Micro Flows, MS Thesis, NationalSunYat-SenUniversity, 2006.

52.    Feng, C.-L., A Novel Design/Fabrication for Micro Fuel Cell Stack Bipolar Plates and Performance Tests, MS Thesis, National Sun Yat-Sen University, 2006.

53.    Yang, T.-K., Experimental Study of Electroosmotic Flow in Microchannels with Velocity/Temperature Measurements, MS Thesis, National Sun Yat-Sen University, 2007.

54.    Huang, Y.-C., Passive Mixing Enhancements in Different Geometric Microchannels with Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 2007.

55.    Liou, J.-H., Stretching and Deformation of DNA Molecules in Converging-Diverging Microchannels, MS Thesis, National Sun Yat-Sen University, 2007.

56.    Huang,Y-J., Micro Proton Exchange Membrane Fuel Cell Transient Current Distribution and Product Water Measurements, MS Thesis, National Sun Yat-Sen University, 2008.

57.    Chu, K. -M., Effects of Open Ratio of Flow Field Plates on a Micro PEM Fuel Cell Performance and Its Transient Thermal Behavior, MS Thesis, National Sun Yat-Sen University, 2008.

58.    Lin, J. -W., Mixing Efficiency of Y-type Mixer with Joule Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.

59.    Tsai, C. -F., Stretching and Deformation of DNA Molecules in a Converging-Diverging Microchannel with Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.

60.    Chen, W. -C., Effect of Different Flow-Fields on μDMFC Performance, MS Thesis, National Sun Yat-Sen University, 2009.

61.    Su, K. -C., Chaotic Mixing in Helical Microchannels, MS Thesis, National Sun Yat-Sen University, 2009.

62.    Lin, C. -J., DNA Molecules Stretching in Torus-Type Microchannels, MS Thesis, National Sun Yat-Sen University, 2010.

63.    Chen, Z. -Y., A Novel Design of μPEM Fuel Cell with a Hydrogen Generator System, MS Thesis, National Sun Yat-Sen University, 2010.

64.    Wu, J. -W., Effect of Methanol and Water Crossover on the Cell Performance, MS Thesis, National Sun Yat-Sen University, 2010.

65.    Yeh, J. -L., Effect of Hydrogen Inlets on Planar μPEM Fuel Cell Stacks, MS Thesis, National Sun Yat-Sen University, 2010.

66.    Chen, J. -W., Characterization of Water Spray Temperature Distribution and Liquid Film Growth Processes, MS Thesis, National Sun Yat-Sen University, 2011.

67.    Wang, H. -B., Visualization of CO2 Gas Bubbles Generation / Removal in Anode and Performance Analysis of a μDMFC, MS Thesis, National Sun Yat-Sen University, 2011.

68.    Lin, C. -W., Effect of Shear Stress of Near-Wall on DNA Molecules Stretching in Microchannels, MS Thesis, National Sun Yat-Sen University, 2011.

69.    Tsai, I. -C., Performance Analysis of a Micro-PEM Fuel Cell with Different Flowfields and Hydrophobic/ Hydrophilic Gas Diffusion Layers, MS Thesis, National Sun Yat-Sen University, 2012.

70.    Jheng, Q. -H., Spary Droplet Diameter and Flowfield Characteristic Analysis, MS Thesis, National Sun Yat-Sen University, 2012.

71.    Lu, C. -Y., Design and Performance Analysis of a Miniature Spray Cooling System, MS Thesis, National Sun Yat-Sen University, 2012.

72.    Su, Y. -W., Performance Test and Electrochemical Impedance Spectroscopy /Cyclic Voltammetry for a μPEM Fuel Cell, MS Thesis, National Sun Yat-Sen University, 2012.

73.    Yang, Y. -J., The Design, Fabrication and Performance Analysis of a Flexible Heat Pipe, MS Thesis, National Sun Yat-Sen University, 2012.

74.    Hsu, Y, -F., Thermal Characteristics of High Power LED Cooling by an Ultrasonic Micro-nozzle Plate, MS Thesis, National Sun Yat-Sen University, 2012.

75.    Wang, M. -L., Thermal Characteristics of High Power LED Cooling by Ultrasonic Micro-nozzle Plate Arrays, MS Thesis, National Sun Yat-Sen University, 2012.

76.    Chen, I. -C., Fabrication and Performance Analysis of Planar Micro Direct Methanol Fuel Cell Stacks with Air-breathing, MS Thesis, National Sun Yat-Sen University, 2013.

77.    Wu, F. -H., Stretching of DNA Molecules and Flow Phenomena in a Closed-loop Microchannel, MS Thesis, National Sun Yat-Sen University, 2013.

78.    Huang, C. -C., λDNA Hydrodynamics Stretching in Microchannels with Different Micropillar Arrays, MS Thesis, National Sun Yat-Sen University, 2013.

79.    Luo, S.-Y., Performance Analysis and Visualization of Thermal hydraulics Characteristics of Liquid Spray through Micro-nozzle Plate Arrays, National Sun Yat-Sen University, 2014.

80.    Ho,C.-C., Effect of Different Flow Fields on the Cell Performance of a Passive μDMFC, National Sun Yat-Sen University, 2014.

81.    Liu, H. –H, Nanofluids Spray Cooling, National Sun Yat-Sen University, 2015.

82.    Li, S. -Y., nPIV/RILF Measurements in Microchannel Flows with Hydrophilic/Hydrophobic Surfaces, MS Thesis, National Sun Yat-Sen University, 2016.

83.    Tsai, M. -R., DNA stretching in Semi/Quartered-Circle Microchannels with Different Radii, MS Thesis, National Sun Yat-Sen University, 2016.

84.    Hung, L. -C., EIS and CV measurements in µDMFC stacks, MS Thesis, National Sun Yat-Sen University, 2016.

85.     Lin, M. –S., Flow/Heat Transfer Characteristics Analysis of Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2016.

·       曾指導的博士論文

1.        Chen, J. -D., A Study o­n Efficiency Promotion of the Crossflow Type Tubular Heat Exchanger, PhD Dissertation, National Sun Yat-Sen University, 1991.

2.        Hong, Y. -J., Flow Field and Heat Transfer Characteristics in Stationary/ Rotating Roughened Channels, PhD Dissertation, National Sun Yat-Sen University, 1993.

3.        Wen, M. -Y., Thermalhydraulic Analysis in Surface-Roughened Annuli and Inserted Tubes, PhD Dissertation, National Sun Yat-Sen University, 1994.

4.        Weng, C. -J., Saturated Nucleate Pool Boiling from Rib-Roughened and Coated Enhanced Surfaces, PhD Dissertation, National Sun Yat-Sen University, 1997.

5.        J. T. Huang, Single Jet Impingement Cooling in a Stationary and Rotating Square Duct, PhD Dissertation, National Sun Yat-Sen University, 2003.

6.        Tsai, H. C., An Experimental Study of Jet Impingement and Spray Cooling, PhD Dissertation, National Sun Yat-Sen University, 2006.

7.        Lin, C. -Y., An Experimental Study of Single / Two Phase Flow in Microchannels, PhD Dissertation, National Sun Yat-Sen University, 2009.

8.        Wu, H. -C., An Experimental Study of Micro Direct Methanol Fuel Cell Stacks, PhD Dissertation, National Sun Yat-Sen University, 2013.

9.        Huang, C. -F., A Novel Design for Planar Array Module-type Micro Fuel Cell Stack, National Sun Yat-Sen University, 2014.