◎ 研討會論文(J. H. Kuang)
B. 國際及國內學術研討會論文 (Conference Papers )
(i) 國際學術研討會論文(International Conference Papers)
1. J. H. Kuang, A. H. Liu, "A Study on the Stress Concentration Effect of Spot Welds," Proc. of the 68th A. W. S. Conf. and 18th International Brazing Conf., Chicago, Ill, U.S.A., AWS-223., (March 1987)
2. J. H. Kuang, L. S. Chen, "A Sensitivity Analysis on the Eigen Solutions of a Linearly Damped System," International Modal Analysis Conference (IMAC-VI), Orlando, U.S.A. pp. 572-578., (Feb. 1988)
3. J. H. Kuang, C. Ou-Yong, "An Estimate of the Frequency Shifts under Local Modification," International
Modal Analysis Conference (IMAC-VII), Las Vegas, U.S.A., (Feb. 1989)
4. J. H. Tsai, J. H. Kuang, "An Improved Branch Method for Gear-Coupled System," 9th International Modal Analysis Conference (IMAC- IX), Florence, Italy, (April 1991)
5. J. H. Kuang, Y. T, Yang, "An Estimate of Mesh Stiffness and Load Sharing Ratio of a Spur Gear Pair," 6th ASME International Power Transmission and Gearing Conference, Phoenix, Arizona. U. S. A., DE-Vol. 43 -1, pp. 1-9, (Sept. 1992)
6. J. H. Kuang, J. F. Lin, "Accelerometer Pair Measurements for Shaft Dynamic Parameters Analysis," 12th International Modal Analysis Conference (IMAC XII), Honolulu, Hawaii, U. S. A., pp. 1649-1655, (Jan. 1994)
7. J. H. Kuang, John Yu, "A Dynamic Tooth Load Model of Addendum Modified Gear Pair," 1994 ASME Design Technical Conferences, DE-Vol. 71, pp. 165-176, Minneapolis, Minnesota, U. S. A., (September, 1994)
8. J. H. Kuang, L. S. Chen, "A Sensitivity Analysis on the Dynamic Characteristics of Steam Turbo Generator Systems," Proc. Of ASME COGEN TURBO POWER '95, 95-CTP-016, Vienna, Austria, (August 1995)
9. J. H. Kuang, W. L. Chen, "The Effects of Protuberance Parameters on Gear Grinding," Proc. of 9th World Congress on the Theory of Machines and Mechanisms, IFToMM 1995, Vol. 1, pp. 575-579, Milano, Italy, (Aug. 29-Sept. 2, 1995)
10. J. H. Kuang, L Y. Chen, "The Effect of Surface Hardness on the Tooth Fatigue Life," ASME 7th International Power Transmission and Gearing Conference, San Diego, U. S. A., (Oct. 1996)
11. J. H. Kuang, Y. C. Chen, "The Tip Plastic Energy Applied to Ductile Fracture Initiation under Mixed-Mode Loading," 1996 German-Taiwanese Colloquium, Darmstadt, German, (Oct. 1996)
12. I. D. Yang, W. H. Wang, J. H. Kuang, and W. H. Cheng, "Thermally induced Stresses in Semiconductor Laser Packaging," Lasers and Electro-Optics Society Annual Meeting, LEOS'96 Conference, IEEE 2, pp 242-243, Boston, U. S. A., (Nov. 18-21, 1996)
13. J. H. Kuang, B. W. Chen, "Localization of Vibrations by Blade Cracks of a Rotating Blade-Disk," The 15th International Modal Analysis Conference of SEM (IMAC XV), Orlando, U. S. A., pp. 1517-1524, (Feb. 1997)
14. S. C. Wang, H. L. Chang, C. Wang, J. H. Kuang, and W. H. Cheng, "Effect of Au Coating on Laser Beam Penetration in Invar-to-Invar Packages," Electronic Components and Technology Conference (ECTC Conference), pp. 1272-1276, California, U. S. A., (May 18-21, 1997)
15. J. H. Kuang, A. D. Lin, "An Analytical Model for Spur Gear Dynamics," 1997 ASME Design Automation Conference, Sacramento, U. S. A., DETC 97/DAC-3855, (Sept. 1997)
16. J. H. Kuang, B. W. Huang, "Coriolis Effect on Mode Localization in a Rotating Bladed Disk," 1997 ASME Design Automation Conference, Sacramento, U. S. A.. DETC 97/VIB-4065, (Sept. 1997)
17. S. C. Wang, H. L. Chang, C. Wang, J. H. Kuang, and W. H. Cheng, "Residual Stresses in Semiconductor Laser Packaging," Lasers and Electro-Optics Society Annual Meeting, LEOS'97 Conference, Vol. 2, pp 283-284, San Francisco, U. S. A., (Nov. 10-13, 1997)
18. J. H. Kuang, B. W. Huang, "Mode Localization of a Cracked Bladed Disk," The 43rd ASME Gas Turbine and Aeroengine Congress, Paper No. 98-GT-105, Stockholm, Sweden, (June 2-5, 1998)
19. H.L. Chang, S.C. Wang, C. Wang, C.M. Wang, J.W. Liaw, M.T. Sheen, Y.C. Sheu, J.H. Kuang, C.H. Chen, and W.H. Cheng, "Thermally Induced Shifts of an Optical Fiber into a Ferrule," Lasers and Electro-Optics Society Annual Meeting, LEOS‘98, Vol. 2, pp. 388-389, Orlando, Florida, U. S. A. (Dec.1-4, 1998)
20. J. H. Kuang, A. D. Lin, "The Torque Responses in Spur Gearing," 1998 ASME Mechanism Conference, Atlanta, U. S. A., DETC/MECH-5834 (Sept. 20-23, 1998)
21. J. H. Kuang, J. Y. Ho, and S. B. Huang, "Dynamic Responses of a Roller Gear Cam System," The 10th World Congress on the Theory of Machines and Mechanisms, IFToMM 1999, Oulu, Finland, (June 20-24, 1999)
22. S.C. Wang, H.L. Chang, C. Wang, C.M. Wang, J.W. Liaw, M.T. Sheen, J.H. Kuang, C.P. Chien, and W.H. Cheng, Y.D. Yang, "Post-Weld-Shift in Semiconductor Laser Packaging," Electronic Components and Technology Conference (ECTC Conference), pp. 1159-1163, San Diego, CA, U. S. A. (June 1-4, 1999).
23. J. H. Kuang, M. T. Sheen and Y. C. Hsu, "The Effect of Residual Stress on the Stress Distribution of an IC Solder Joint," ASME International, Intersociety Electronic Packaging Conference, Vol. 26-1, pp. 1047-1051, Hawaii, U. S. A., (June 13-19, 1999)
24. J. H. Kuang, and B. W. Huang, "Dynamic Stability in a Cracked Turbo Blade-Disk, "The 44th ASME Gas Turbine Aeroengines Technical Congress, Indianapolis, U. S. A. 99-GT-411, (June 7-10, 1999)
25. H.L. Chang, S.C. Wang, C. Wang, C.M. Wang, T.T. Shi, M.T. Sheen, C.P. Chien, J.C. Chen, G.L. Wang, J.H. Kuang, K.C. Hsieh, and W.H. Cheng, "Effect of Joint Strength of PbSn and AuSn Solders on Temperature Cycling in Laser Packages," IEEE Lasers and Electro-Optics Society 12th Annual Meeting, LEOS‘99, Vol. 2, pp. 800-801, San Francisco, CA, U. S. A. (Nov. 8-11, 1999).
26. J. H. Kuang, A. D. Lin, "The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair," 1999 ASME International Design Engineering Technical Conference, Las Vegas, U. S. A., (Sept. 12-15, 1999)
27. J. H. Kuang, and B. W. Huang, "Mode Localization in a Grouped Blade-Disk," The 45th ASME International Gas Turbine Aeroengines Technical Congress, Munich, German, 2000-GT-369, (May 8-11, 2000)
28. W.H. Cheng, M.T. Sheen, J.H. Kuang, J.C. Chen, G.L. Wang, S.C. Wang, H.L. Chang, C. Wang, and C.M. Wang, "The Effect of Temperature Cycling on Fiber-Solder-Ferrule Joints in Laser Module Packaging," Electronic Components and Technology Conference (ECTC 2000), pp. 1498-1503, Las Vegas, Nevada, U. S. A. (May 21-24, 2000)
29. C. H. Chang, M. T. Sheen, J. H. Kuang, C. C. Chen, and W. H. Cheng, "Finite-Element Analysis of Solder Joint Strength in Laser Diode Packaging," Proceeding of Optoelectronics Symposium SPIE2000 Conference, The International Society for Optical Engineering, Taipei, Taiwan. 4078-97, pp. 646-651, (July 26-28, 2000)
30. M. T. Sheen, P. C. Chen, J. H. Kuang, C. C. Chen, and W. H. Cheng, "Finite-Element Analysis of Fiber Shifts in Fiber-Solder-Ferrule Joints Using AuSn Solder in Laser Diode Packaging," Proceeding of Optoelectronics Symposium SPIE2000 Conference, The International Society for Optical Engineering, Taipei, Taiwan. 4078-98, pp. 652-658, (July 26-28, 2000)
31. J. H. Kuang, A. D. Lin, "On the Interaction Between The Dynamic Contact Load and The Surface Wear of a Plastic Gear Pair," ASME 2000 Design Engineering Technical Conference, Baltimore, Maryland, U.S.A., DETC2000/DAC-14529, (Sept., 2000)
32. J. H. Kuang, and M. H. Hsu, "Differential Quadrature Method on the Vibration Formulation of a Grouped Blade Disk," The 46th ASME International Gas Turbine Aeroengines Technical Congress, 2001-GT-0273, New Orleans, U. S. A., (June 8-11, 2001)
33. B. W. Huang and J. H. Kuang, "The Coupled longitudinal and Bending Vibrations on Stability in a Cracked Blade-Disk," The 46th ASME International Gas Turbine Aeroengines Technical Congress, New Orleans, U. S. A., (June 8-11, 2001)
34. J. H. Kuang, M. T. Sheen, J. M. Chen, C. S. Hsieh, and W. H. Cheng, "Reduction of Fiber Alignment Shift in Add/Drop Filter Module Packaging", The 4th Pacific Rim Conference on Lasers and Electro-Optics CLEO/PR‘01, Vol. 2, pp. 236-237, Chiba, Japan, (July, 15-19, 2001) (EI)
35. M.T. Sheen, C.M. Chang, H.C. Teng, J. H. Kuang, K.C. Hsieh, and W.H. Cheng, "Effect of Joint Strength of PbSn and AuSn Solders on Thermal Aging in Laser Packages," IEEE Lasers and Electro-Optics Society 14th Annual Meeting, LEOS‘01, Vol. 2, pp. 435-436, San Diego, CA., U. S. A. (Nov. 12-15, 2001) (EI)
36. J. H. Kuang and M. H. Hsu, "Eigen Solutions of an Orthotropy Composite Blade Solved by the Differential Quadrature Method," The 47th ASME International Gas Turbine Aeroengines Technical Congress, GT-2002-30423, Vol. 4B, pp. 933-942, Amsterdam, The Netherlands, (June 3-6, 2002) (EI)
37. J. H. Kuang, A. D. Lin, " The Interaction Between Contact Loads and Tooth Wears of an Engaged Plastic Gear Pair," Proceeding of the ASME 2002 Design Engineering Technical Conference, Vol. 5A, pp. 209-216, Montreal, Canada, DETC2002/MECH-34222, (Sept.27-Oct. 3, 2002) (EI)
38. Bo Wen Huang and Jao Hwa Kuang, " The Effect of Grouped Blade Number on Mode Localization of a Cracked Turbo Blade Disk," The 49th ASME International Gas Turbine Aeroengines Technical Congress, GT2004-54082, Vienna, Austria, GT2004-54082 (June 14-17, 2004)
39. Ying-Chien Tsai, Yi-Cheng Hsu, Yeh-Lin Ho, Maw-Tyan Sheen, Jao-Hwa Kuang and Wood-Hi Cheng " A Novel Fiber Alignment Shift Measurement and Correction Technique in Laser-Welded Laser Module Packaging," The 54th ECTC Electronic Components and Technology Conference, Las Vegas, Nevada, U. S. A. (June 1-4, 2004)
40. Bo Wen Huang and Jao Hwa Kuang, " Dynamic Response of a Cracked Gas-Bearing Spindle," 2004 ASME International Mechanical Engineering & Exposition, IMECE 2004-59480, Anaheim, California, U. S. A., (November 13-19, 2004)
41. Yung-Chuan Chen and Jao Hwa Kuang, "Elastic-Plastic Partial Slip Rolling Wheel-Rail Contact with a Oblique Rail Crack," 2004 ASME International Mechanical Engineering & Exposition, IMECE2004-59379, Anaheim, California, U. S. A., (November 13-19, 2004)
42. T. C. Hsu, Y. C. Tsai, J. H. Kuang, Y. S. Hung, and W. H. Cheng, "A Novel Post-Weld-Shift Measurement and Compensation Technique in butterfly-Type Laser Module Packages," Proceeding of Optics & Photonics SPIE2005 Conference, The International Society for Optical Engineering, 5877-13, San Diego, California, U. S. A., (July 31-August 4, 2005)
43. Wood-Hi Cheng, Yi-Cheng Hsu and Jao-Hwa Kuang, "Post-Weld Shift Compensation Techniques in TO-Can and Butterfly Types Laser-Welded Laser Module Packages," (invited paper), IEEE Lasers and Electro-Optics Society 18th Annual Meeting, LEOS‘2005, Sydney, Australia (Oct. 23-27, 2005) (EI)
44. Bo Wen Huang and Jao Hwa Kuang, " Dynamic Instability in a High Speed Drilling Process," 2005 ASME International Mechanical Engineering & Exposition, IMECE2005-80341, DE21A, Orlando, Florida U. S. A., (November 5-11, 2005)
45. Yung-Chuan Chen, Jao Hwa Kuang, Li-Wen Chen, Jiang-Che Shin and Sing-You Lee, "Wheel Rail Thermal Contact on Rail Corrugation During Wheel Braking," 2005 ASME International Mechanical Engineering & Exposition, IMECE2005-79859, AMD-1, Orlando, Florida U. S. A., (November 5-11, 2005)
46. Ah-Der Lin and Jao Hwa Kuang, " Shape Parameter Measurement of Profile-Shifted Spur and Helical Gears," 2005 ASME International Mechanical Engineering & Exposition, IMECE2005-80191, DE3, Orlando, Florida U. S. A., (November 5-11, 2005)
47. Jao-Hwa Kuang Hsuan-Sheng Chen, and Tsung-Pin Hung, "The Blade Strength and the Dynamic Characteristics of High Speed Micro-turbines," The 51th ASME International Gas Turbine Aeroengines Technical Congress, GT-2006-91312, Session: 16-7 Microturbine Materials/Ceramic Component Issues – Durability, Barcelona, Spain, (May 8-11, 2006) (EI)
48. Jao Hwa Kuang, Pao-Chun Chen and Yung-Chuan Chen, "The Effect of Misalignments on Power Loss of Coupling in Multimode Plastic Fibers," 15th International Conference on Plastic Optical Fiber, Proceeding of POF 206, pp. 474-479, Seoul, Korea, (September 11-14, 2006)
49. Yung-Chuan Chen, LiWen Chen, Jao Hwa Kuang "Power losses of bending and Elongated Polymer Optical Fibers under High Temperature Condition," 15th International Conference on Plastic Optical Fiber, Proceeding of POF 2006, pp. 480-485, Seoul, Korea, (September 11-14, 2006)
50. Y. C. Hsu, J. H. Kuang, Y. C. Tsai and W. H. Cheng " High Coupling Efficiency and High Yield Coaxial-Type Laser Module Packages using On-Line Monitoring System," The 19th Annual Lasers and Electro Optics Society Meeting, Proceeding of LEOS 2006, MJ03, Montreal, Canada, (Oct. 29-Nov.02, 2006)
51. Jao-Hwa Kuang, Shih-Chieh Sun and Shin-Pon Ju, " The Effect of Local Cavity Defect on the Nano Vibration Characteristics of Carbon Diamond Structures," International Conference on Nanoscience & Technology, China 2007, Paper No. iP396, Beijing, China. (June 4 to 6, 2007)
52. Jao-Hwa Kuang and Chao-Ming Hsu, “Dynamic Behavior of Roller Gear Cam Systems with Different Torque Compensation Mechanics,” The 12th IFToMM World Congress, Paper A-29, Besancon, France. (June 18-21, 2007)
53. B. W. Huang, J. H. Kuang and P. P. Yu, “Effect of Crack on Dynamic Characteristics in a Drilling Process,” The 12th IFToMM World Congress, Paper No. A352, Besancon, France. (June 18-21, 2007)
54. A. D. Lin, and J. H. Kuang, “On the Bending and Surface Fatigues of an Engaging Spur Gear Pair,” The 12th IFToMM World Congress, Paper No. A790, Besancon, France. (June 18-21, 2007)
55. Yung-Chuan Chen, Li-Wen Chen, Sing-You Lee, and Jao-Hwa Kuang, “A wheel and a Corrugated Rail Thermal Contact Simulation During Braking Sliding,” The 12th IFToMM World Congress, Paper No. A319, Besancon, France. (June 18-21, 2007)
56. B. W. Huang, J. H. Kuang and P. P. Yu, “Dynamic Characteristics of a Mistuned Heat Exchanger in Cross-Flow,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences IDETC/CIE 2007, Paper No. DETC2007-34729, Las Vegas, Nevada, USA. (September 4-7, 2007)
57. A. D. Lin, and J. H. Kuang, “The Bending and Surface Contact Stress Variations in a Mating Plastic Gear Pair,” Proceedings of the ASME 2007 International Design Engineering Technical Conferences IDETC/CIE 2007, Paper No. DETC2007-34470, Las Vegas, Nevada, USA. (September 4-7, 2007)
58. Jao-Hwa Kuang, Chao-Ming Hsu and Wen-Chun Chiu, “Variation of Shear Strength of Lead Free Sn/3.0Ag/0.5Cu Solder Ball Joints,” The 9th Electronics Packaging Technology Conference (EPTC2007), Paper No. P0263, Singapore. (December 10th-12th, 2007)
59. Jao-Hwa Kuang and Tsung-Pin Hung, “Laser Hammering Technique in Butterfly Laser Module Packaging,” The 9th Electronics Packaging Technology Conference (EPTC2007), Paper No. P0156, Singapore. (December 10th-12th, 2007)
60. Y.C. Hsu, Y.K. Lin, C.C. Tsai, J.H. Kuang, S.B. Huang, H.L. Hu, Y.I. Su, and W.H. Cheng, "Failure Mechanisms Associated with Lens Shapeof High-Power LED Modules in Aging Test," IEEE Lasers and Electro-Optics Society Annual Meeting, LEOS 2007, WS3, pp. 570-571, Lake Buena Vista, Florida., U. S. A. (October 21st- 25th, 2007) (EI)
61. Jao-Hwa Kuang, Hui-Lung Chien, Yung-Yu Chen, “Effects of Artery and Plaque on Stent Expansion,” The 2nd International Conference on Bioinformatics and Biomedical Engineering (iCBBE2008), Shanghai, China. (May 16th to 18th, 2008)
62. J. H. Kuang, M. H. Hsu and T. P. Hung,” Dynamic Characteristics of Composite Helicopter Blade Solved by using the Differential Quadrature Method,” GT2008-5019, ASME Turbo Expo 2008: Power for Land, Sea and Air, GT2008, Berlin, Germany ( June 9-13, 2008)
63. J. H. Kuang, C. M. Hsu, and C. C. Hu, “Residual Vibrations of Roller Gear Cam Systems,” International Mechanisms and Machine Science Conference, CCMMS 2008, July 28-31, ISSN 1006-2343, Vol. 24, pp.174-176, Dalian, China, (July 28-31, 2008)
64. A. D. Lin, H. K. Kung and J. H. Kuang,, “The Effect of Dynamic Contact Loads and Tooth Surface Hardness on the Running Life of an Engaging Spur Gear Pair,” International Mechanisms and Machine Science Conference, CCMMS 2008, ISSN 1006-2343, Vol. 24, pp.166-170., Dalian, China, (July 28-31, 2008) (Best Paper Award)
65. A. D. Lin, B. W. Huang and J. H. Kuang,, “The Effect of Tip Modification on the Running Life of an Engaging Spur Gear Pair,” International Mechanisms and Machine Science Conference, CCMMS 2008, ISSN 1006-2343, Vol. 24, pp.108-111, Dalian, China, (July 28-31, 2008)
66. H. L. Chen, Y. C. Wang and J. H. Kuang, “Effects of Artery and Plaque on Stent Expansion,” 2008 ISBN 978-986-7339-379, Proceedins of 2008 International Symposium on Mechatronic and Biomedical Engineering & Applications, pp.38-45, November 05-06, 2008, Kaohsiung, Taiwan (Keynote Speaker)
67. Chun-Chin Tsai, Ming-Hung Chen, Yuan-Tsun Lo, Ying-Jyun Lin, Yi-Cheng Hsu, Jao-Hwa Kuang, and Wood-Hi Cheng , “Decay Mechanisms of Radiation Pattern and Optical Spectrum of High-Power LED Modules in Aging Test” IEEE Lasers and Electro-Optics Society Annual Meeting, LEOS 2008, WS3, pp. 570-571, Newport Beach, CA., U. S. A. (9-13 November 2008) (EI)
68. Kuang, J. H., Yin, C. H. , Huang, B. W. and Tsai, J. C., “Dynamic Characteristics and Residual Vibration of a Golf Club,” Proceedings of 2008 Joint International Pre-Olympic Conference on Sports Science and Sport Engineering, Nanjing, China, (August. 5-7, 2008)
69. Bo Wun Huang, Ah Der Lin, Yung Chuan Chen and Jao Hwa Kuang, “A Dynamic Model for a Drill in the Drilling Process,” The 5th International Conference on Computational and Mathematical Sciences, Paper Number 32000, Vienna, Austria, (August 13-15, 2008)
70. Kuang Jao-Hwa , Huang Bo-wun , Yen Ke-tien, Hsiao Der-ren, “The Effect of Fluid Flow on Natural Properties in Multi-Tobes System,” The International Symposium on Unsaturated Soil Mechanics and Deep Geological Disposal of Nuclear Waste 2009, Shanghai, China, UW005, (Aug. 24-28, 2009)
71. G. S. Hwang, J. C. Lin, D. M. Tsay, J. H. Kuang and T. L. Chern, “An Innovative Transmission Mechanism Applicable to Variable Speed Wind Turbines,” International Conference on Renewable Energies and Power Quality, ICREPQ’10, Granada , Spain, (23th to 25th March, 2010) (Best Paper Award)
72. Guan-Shyong. Hwang, Der-Min Tsay, Jao-Hwa Kuang and Tzuen-Lih Chern, “Kinematical Anslysis of a Novel Transmission Mechanism with Steady-Speed Output for Variable Speed Wind Turbines,” Proceedings of ASME Turbo Expo 2010 GT2010, , Glasgow, UK, GT2010-23207 (June 14-18, 2010)
73. Bo Wun Huang, Pu Ping Yu and Jao-Hwa Kuang, “Using Finite Element Analysis on Dynamic Characteristics in a Micro Stepping Mill,” International Conference on Mechanical and Industrial Engineering ,ICMIE2010, SG69000, Singapore, (August 25-27, 2010) Las Vegas, Nevada, USA from June 1-June
74. Jimmy Wang, Cheng-Hsun Chung, Chun-Chin Tsai, Ming-Hung Chen, Wei-Chih Cheng, Jyun-Sian Liou, Jin-Kai Chang, Yi-Cheng Hsu, Shang-Chao Hung, Chao-Wei Lee, Hung-Lieh Hu, Sheng-Bang Huang, Jao-Hwa Kuang, and Wood-Hi Cheng, “High Thermal Stability of High-Power Phosphor Based White-Light-Emitting Diodes Employing Ce:YAG-Doped Glass,” 60th Electronic Components and Technology Conference, ECTC2010, Las Vegas, Nevada, USA pp. 700-703( June 1- 4, 2010).
75. Tzuen-Lih Chern, Li-Hsiang Liu, Ching-Nan Huang, Yu-Lun Chern, Jao-Hwa Kuang, “High Power Factor Flyback Converter for LED Driver with Boundary Conduction Mode Control,” the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA 2010), ThM2 – PFC, P0240, Taichung, Taiwan (15 - 17 June 2010).on
76. Ping Lung Pan, Tzuen-Lih Chern, Jao-Hwa Kuang, “Sliding Mode Control for PWM Single Phase Boost Power Factor Correction,” the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA 2010), WeM5 - Interactive Session on Power Electrics and Control, P0436, Taichung, Taiwan (15 - 17 June 2010).e
77. Bo-Wun Huang , Pu-Ping Yu, and Jao-Hwa Kuang, “Using Finite Element Analysis on Dynamic
Characteristics in a Micro Stepping Mill,” 2010 World Academy of Science, Engineering and Technology, WASET 2010, 69, pp. 8-12, Singapore,(August 25-27, 2010)
78. Bo-Wun Huang , Pu-Ping Yu, Jeng-Nan Lee ,and Jao-Hwa Kuang, “Natural Properties of a Micro Mill with Moving Boundary Conditions,” 2010 International Symposium on Mechanical Science and Technology, ISMST 2010, A603, Guangzhou China,(Septemper 25-27, 2010) (
79. Tzuen-Lih Chern, Li-Hsiang Liu, Shih-Wei Lin, Der-Min Tsay, Jao-Hwa Kuang, Whei-Min Lin, “The Sensor-less Speed Control Driver with Current Feedback for Three-Phase Brushless DC Fan Motor,” 2011 6th IEEE Conference on Industrial Electronics & Applications, ICIEA 2011, P0274, Beijing, China,(June 21-23, 2011) (
80. Tzuen-Lih Chern, Ping-Lung Pan, Hsuan-Yi Liao, Der-Min Tsay, Jao-Hwa Kuang, “Single-stage Buck Type LED Lighting Driver with New Design of Current Integral Control,” 2011 6th IEEE Conference on Industrial Electronics & Applications, ICIEA 2011, P0244, Beijing, China,(June 21-23, 2011)
81. Guan-Shyong Hwang, Chung-Chi Lin, Der-Min Tsay, Jao-Hwa Kuang, and Tzuen-Lih Chern, “Power Flows and Torque Analyses of an Independently Controllable Transmission with a Parallel Type,” 2011 International Conference of Mechanical Engineering (ICME 2011), ICME_270, London, U.K., (6-8 July 2011)
82. Tsung-Pin Hung, Jao-Hwa Kuang, Shian-Huan Chiou, Chao-Ming Hsu, “Enhancement of coupling efficiency of butterfly package laser modules based on Post-Weld-Shift compensation,” 2011 International Conference on Engineering and Technology Innovation (ICETI2011), D1015, Kenting, Taiwan,(November 11-15, 2011)
83. Hui-Lung Chien, Pei-Ju Chiu, Bo-Wun Huang, Jao-Hwa Kuang, “Young’s Moduli of Human Tooth Measured using Micro-Indentation Tests,” 2011 International Symposium on Mechatronic and Biomedical Engineering & Applications (ISMBEA 2011), Cheng Shiu University, Kaohsiung, Taiwan, (November 08, 2011)
84. Hwang, G. S., Lin, C. C., Tsay, D. M., Kuang, J. H., and Chern, T. L., “Power Flows and Torque Analyses of an Independently Controllable Transmission with a Parallel Type,” the International Conference of Mechanical Engineering of the World Congress onEngineering 2011 (WCE 2011), London, UK, (July 6-8, 2011)
85. Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin and Jyun-Wei Luo, “The Effect of Residual Stress on Coupling Power Loss of VCSEL Modulus,” 2011 International Conference on Opto-Electronics Engineering and Information Science (ICOEIS 2011), ES1088, Xi’an, China,( December 23-25, 2011)
86. Ah-Der Lin, C.K. Chen, Da-Yun Huang , Chao-Ming Hsu, Jao-Hwa Kuang, “Stainless Steel Surface Etching Morphologies by Electro Plasma Technology,” The 2nd International Symposium on Mechanical Science and Technology (ISMST 2011), X1750, Guangzhou, China,( December 20-21, 2011)
87. Jao-Hwa Kuang, Tsung-Pin Hung, Kuen Lai, Chao-Ming Hsu, Ah-Der Lin," The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse Laser," The 3rd International Conference on Manufacturing Science and Engineering, (ICMSE2012) , V6932, Xiamen, China (March 27-29, 2012)
88. Chao-Ming Hsu, Tsung-Pin Hung, Ah-Der Lin and Jao-Hwa Kuang, " An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints", The 3rd International Conference on Manufacturing Science and Engineering, (ICMSE2012 ), V6942, Xiamen, China (March 27-29, 2012)
89. Guan-Shyong Hwang, Der-Min Tsay, Jao-Hwa Kuang, Kinematic and Dynamic Analyses of a Series-Type Independently Controllable Transmission Mechanism,” 2012 International Conference on Advanced Manufacturing, (ICAM2012), S0122, Jiaoxi, Yilan, Taiwan, (March 3-7, 2012)
90. Ah-Der Lin, Jao-Hwa Kuang, The Stress Variations in a Mating Plastic Spur Gear Pair,” 2012 International Conference on Advanced Manufacturing, (ICAM2012), S0167, Jiaoxi, Yilan, Taiwan, (March 3-7, 2012)
91. B.W. Huang, D.R. Hsiao, J.-G. Tsneg, J. H. Kuang, “Vibration Properties and Performance of a Membrane Fuel Cell,” The 5th International Mechanical Engineering Forum 2012 (IMEF 2012), X1750, Prague, Czech Republic,( June 20-22, 2012)
92. Guan-Shyong Hwang, Der-Min Tsay, Jao-Hwa Kuang, Tzuen-Lih Chern, Tsu-Chi Kuo, “Design of a Series-type Independently Controllable Transmission Mechanism,” The ASME 2012 11th Biennial Conference On Engineering Systems Design And Analysis (ESDA2012), ESDA2012-82131,, Nantes, France, (July 2-4, 2012)
93. Tsung-Pin Hung, Chao-Ming Hsu, Ah-Der Lin, and Jao-Hwa Kuang, “Residual Stress and Bead Profile Analysis of Pulsed Nd:YAG Laser Lap Welding,” The 2nd International Conference on Engineering and Technology Innovation 2012(ICETI2012), J1053, Kaohsiung, Taiwan, (November 02-06, 2012)
94. Shih-Chieh Sun, Chi-Wei Chung, Chao-Ming Hsu and Jao-Hwa Kuang, “The Squeeze Film Damping Effect on Dynamic Responses of Micro-electromechanical Resonators,” The 2nd International Conference on Engineering and Technology Innovation 2012(ICETI2012), Y1008, Kaohsiung, Taiwan, (November 02-06, 2012)
95. Bo-Wun Huang, Jung-Ge Tseng and Jao-Hwa Kuang, “Vibration of a tube with the Axial Loads and Fluid,” 2012 International Conference on Applied Mechanics and Materials (ICAMM2012), MM1163, Sanya, China, (November 24-25, 2012)
96. Shih-Chieh Sun, Chao-Ming Hsu, Jau-Wen Lin and Jao-Hwa Kuang, “The Local Defect Effect on Molecular Local Density State in Carbon Diamond Structures,” 2012 International Conference on Applied Mechanics and Materials (ICAMM2012), MM1435, Sanya, China, (November 24-25, 2012)
97. Chao-Ming Hsu, Ah-Der Lin, Tsung-Pin Hung, Wen-Chun Chiu and Jao-Hwa Kuang, “Shear Toughness Evaluation of Solder Joints for the Reliability Tests,” 2012 First International Conference on Information, Communication and Engineering (ICICE 2012), Paper No. 1019, Fuzhou, Fujian Province, China, (December 15-20, 2012)
98. Shih-Chieh Sun, Chiung-Yu Huang, Chao-Ming Hsu, and Jao-Hwa Kuang, “The Effect of Nano-Scale Local Defects on Mechanical Properties of Silicon and Diamond Films,” 2012 First International Conference on Information, Communication and Engineering (ICICE 2012), Paper No. 1027, Fuzhou, Fujian Province, China, (December 15-20, 2012)
99. Jung-Ge Tseng, Bo Wun Haung, Lian Sen Mao, and Jao Hwa Kuang, “Buckling Characteristics of Microdrills by Using Finite Element Method,” 2013 International Conference on Manufacturing Engineering and Technology (ICMET 2013), Paper No. TR78000, Istanbul, Turkey (June 20-21,2013)
100. Jao-Hwa Kuang, Chun-Ho Yin, Kuang-Yao Chang, Pao-Chuan Chen, “The Effect of Tip-lens on Coupling Efficiency of Plastic Optical Fiber Coupler,” 2013 International Conference on Information, Communication and Engineering (ICICE 2013), Paper No. 1010, Qingdao, Shandong Province, P.R. China (Oct. 26-Nov. 2, 2013)
101. Chao-Ming Hsu, Ah-Der Lin, Jao-Hwa Kuang, “The Creep Parameters of SAC305 Unleaded Solders,” 2013 International Conference on Information, Communication and Engineering (ICICE 2013), Paper No. 1262, Qingdao, Shandong Province, P.R. China (Oct. 26-Nov. 2, 2013)
102. Guan-Shyong Hwang, Bor-Jeng Lin, Jao-Hwa Kuang, Wei-Hsiang Liao, Jau-Woei Perng, Der-Min Tsay, “Synthesis and Analysis of an Independently Controllable Gear Train for Wind Turbines,” The ASME Turbo Expo 2014, Paper No.GT2014-27104, pp 1-7, Düsseldorf, , German, (June 16-20, 2014)
103. Jao-Hwa Kuang, Chao-Jung Chen , Jung-Ge Tseng and Bo-Wun Huang, “An investigation of a nonlinear dynamic problem with two different analytical methods,” The 3th International Eurasian Conference on Mathematical Sciences and Applications (IECMSA-2014), Paper No.ND2014-0016,Vienna , Austria, (August 25-28, 2014)
104. Jao-Hwa Kuang, Chao-Ming Hsu, and Ah-Der Lin, “Effects of the Bonding Force on the Conductivity of ACF Packaging,” 2014 International Conference on Information, Communication and Engineering (ICICE 2014), Paper No. 0330, Guiyang, Guizhou, P.R. China (Oct. 18-22, 2014)
105. Chao-Ming Hsu, Ah-Der Lin, Jao-Hwa Kuang, “The Coffin-Manson Formula for Unleaded Sn/3.0Ag/0.5Cu Solder,” 2015 International Conference on Applied System & Innovation (ICASI 2015), Paper No. 1672, Osaka, Japan (May 22-26, 2015)
106. Bo-Wun Huang, Jao-Hwa Kuang and J.-G. Tseng,” Dynamic Properties of Coupled Tube-Array Structures with the Axial Loads,” the 9th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2015), Paper No. ACX216, Munich, Germany, (29th June – 2nd July, 2015)
107. C. L. Lin, D. M. Tsay, J. W. Perng, J. H. Kuang, G. S. Hwang, and B. J. Lin “Experimental Verification of the Speed-Stabilizing and Power-Splitting Transmission Mechanism for Wind Turbines,” The 14th IFToMM World Congress, Paper No. A319, Taipei, Taiwan. (Oct. 25-30, 2015)
108. Jao-Hwa Kuang, Chao-Ming Hsu, and Ah-Der Lin, “Determination of Piezoelectric Parameters from the Measured Natural Frequencies of a Piezoelectric Circular Plate,” 2015 International Conference on Information, Communication and Engineering (ICICE 2015, Paper No. 1838, Xiangtan, Hunan, P.R. China (Oct. 23-28, 2015)
109. Pu-Ping Yu, Jung-Ge Tseng, Jao-Hwa Kuang, Ci-Tai Li, and Bo-Wun Huang,,” Effects of the Coupling Stiffness and Crack on Dynamic Properties of a Blade System by FEM,” The 7th International Conference from “Scientific Computing to Computational Engineering” (7th IC-SCCE), Paper No. 118, Athens, Greece, (July 6-9, 2016)
(ii) 國內學術研討會論文(Domestic Conference Papers)
1. J. H. Kuang, C. Y. Lie; "An Investigation on the Synthesizing Flexibility of Substructure Synthesis Methods," Proc. of the 2nd Nat. Conf. on Mech. Eng., CSME , Kaohsiung, pp. 574-581. Oct. 1985,
2. J. H. Kuang, C. Y. Lie; "A Modified Mass Condensation Method for Structural Dynamic Analysis," Proc. of the 10th Nat. Conf. on Theo. and Appl. Mech., STAM ,Kaohsiung, pp. 495-508. Nov. 1986,
3. J. H. Kuang, C. S. Liang and L. S. Chen; "An Estimation of the Modified Natural Frequencies via the Frequency Response Functions," Proc. of the 3rd Nat. Conf. on Mech. Eng., CSME, Chung-Li, pp. 655-668. Dec. 1986,
4. J. H. Kuang, Y. C. Tsai, Y. T. Yang and L. L. Chang, "A Study on the Vibration of Cooling Water Component Heat Exchangers (I)," AEC 1987 Annual Conference, I-10.,.November, 1987,
5. J. H. Kuang, L. L. Chang; "The Effect of Tooth Profile Shifted Factors on the Surface Durability of Profile Shifted Gears," Proc. of the 4th Nat. Conf. on Mech. Eng. ,CSME , Hsinchu, pp. 713-718. Dec. 1987,
6. J. H. Kuang, Y. T. Yang; "A Study on the Mesh Stiffness of a Gear Pair," Proc. of the 5th Nat. Conf. on Mech. Eng. ,CSME , Taipei, pp. 1241-1250. Dec. 9, 1988,
7. J. H. Kuang, Y. C. Tsai, Y. T. Yang and L. L. Chang, "A Study on the Vibration of Cooling Water Component Heat Exchangers (II)," AEC 1988 Annual Conference, I-10. Dec. 1987,
8. J. H. Tsai, J. H. Kuang; "An Improved Branch Method for Gear-Coupled System," Proc. of the 6th Nat. Conf. on Mech. Eng., CSME, Tainan, pp. 1619-1630. Dec. 1989,
9. J. H. Kuang, C. Y. Lee, "On a Guyan-Reduction Recycled Eigen Solution Technique," Proc. of MSC/NASTRAN Users Conference. Oct. 1990,
10. N. J. Ho, J. H. Kuang; "A Study on the Weldment Crack Propagation of Nuclear Pressure Vessel Material A533B," AEC 1990 Annual Conference, I-20. Dec. 1990,
11. J. H. Kuang, J. J. Chen; "A Study on the Dynamic Characteristics of Robot Arms," AEC 1991 Annual Conference , Dec. 1991,
12. L. S. Chen, J. H. Kuang; " The Comparison of Stress Intensity Factors Solved by Using Different Quarter-Point Elements," 5th National Conference on Theoretical and Applied Mechanics, Tainan, pp. 891-896. Dec. 1991,
13. C. J. Chen, L. S. Chen, J. H. Kuang; "Effect of Tip Element Size on the Stress Intensity Factors in Linear Fracture Mechanics," 5th National Conference on Theoretical and Applied Mechanics, Tainan, pp. 897-903. Dec. 1991,
14. J. H. Kuang, J. J. Chen; "A Dual-Points Transmissibility Method for Determining the Dynamic Characteristics of the Remote Controlled Robot Arms," AEC 1992 Annual Conference, II-10, pp. 135-154. Nov. 1992,
15. J. H. Kuang, J. P. Yeh, "The Cutting Path Algorithm of Plastic Gear Mold" Proc. of the 11th Nat. Conf. on Mech. Eng. CSME, Taichung, Taiwan, pp. 515-523. Nov. 1994,
16. J. H. Kuang, A. D. Lin, "A Study on the Vibration Spectra of Meshing Spur Gear Pairs," Proc. of the 11th Nat. Conf. on Mech. Eng. CSME, Taichung, Taiwan, pp. 99-105. Nov. 1994,
17. J. H. Kuang, Y. S. Fong, "A Study on the Frequency Spectra of the Rotationary Machines," Proc. of the 1994 A.E.C. Annual Conf., Taoyuan, Taiwan, pp. I 219-I 239, Nov. 1994,
18. Y.C. Chen, J. H. Kuang, "A Study of J-Integral within Plastic Zone by Finite Element Method," Proc. of the 18th National Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, pp. 41-47. Dec. 1994,
19. C. K. Chen, J. H. Kuang, "Assessment on Engineering Estimation for Angled Crack Problems," Proc. of the 18th National Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, pp. 145-149. Dec. 1994,
20. J. H. Kuang, A. D. Lin, "A Study on the Dynamic Responses of a Meshing Spur Gear Pair," Proc. of the 12th Nat. Conf. on Mech. Eng. CSME, Chaii, Taiwan, pp. 503-511 Nov. 1995,
21. J. H. Kuang, Y. S. Fung, "A Modified Single Mode Extraction Method for Modal Parameters Determination," Proc. of the 12th Nat. Conf. on Mech. Eng. CSME, Chaii, Taiwan, pp.213-222. Nov. 1995,
22. Y. C. Chen, J. H. Kuang, "Elastic-Plastic Finite Element Study of Crack Growth Initiation Under Mixed-Mode Loading," Proc. of the 19th National Conference on Theoretical and Applied Mechanics, Taoyuan, Taiwan, pp. 267-273. Dec. 1995,
23. C. K. Chen, J. H. Kuang, "Coalescence of Two Collinear Cracks in Close Proximity," Proc. of the 19th National Conference on Theoretical and Applied Mechanics, Taoyuan, Taiwan, pp. 275-279. Dec. 1995,
24. A. D. Lin, J. H. Kuang, "A Study on the Vibration Spectra of a Meshing Spur Gear Pair," Proc. of the 13th Nat. Conf. on Mech. Eng. CSME, Taipei, Taiwan, pp. 419-426 Nov. 1996,
25. W. U. Chen, B. L. Huang, J. H. Kuang, "Tooth Parameter Measurements of Profile Shifted Spur Gears," Proc. of the 13th Nat. Conf. on Mech. Eng. CSME, Taipei, Taiwan, pp. 427-434. Nov. 1996,
26. C. G. Chen, S. B. Huang, J. H. Kuang, "Measurement of Bending and Torsional Stiffness for Couplings," Proc. of the 20th National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, pp. 32-38. Dec. 1996,
27. B. W. Huang, J. H. Kuang, "A Study on the Mode Localization of Blade-Disk System," Proc. of the 20th National Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, pp. 25-31. Dec. 1996,
28. W. H. Wang, I. D. Yang, J. H. Kuang, and W. H. Cheng, "Finite Element Analysis of Thermal Stresses in Semiconductor Laser Packaging," IEDMS Conference, Hsinchu, Taiwan. Dec. 16-20, 1996,
29. A. D. Lin, M. H. Tsai, J. P. Yeh and J. H. Kuang, "Dynamic Analysis for Plastic Gears," Proc. of the 14th Nat. Conf. on Mech. Eng. CSME, Chun-Li, Taiwan, pp. 417-424 Dec. 1997,
30. S. F. Lin, K. C. Chang and J. H. Kuang, "Vibration Analysis of Printed Circuit Boards," Proc. of the 14th Nat. Conf. on Mech. Eng. CSME, Chun-Li, Taiwan, pp. 221-228 Dec. 1997,
31. A. D. Lin, M. H. Tsai, J. P. Yeh and J. H. Kuang, "Tooth Strength Analysis for Plastic Gears," Proc. of the 21th National Conference on Theoretical and Applied Mechanics, Taichung, Taiwan, pp. 433-440 Dec. 1997,
32. B. W. Huang and J. H. Kuang, "The Mode Localization in a Grouped Rotation Bladed-Disk with a Cracked Blade," Proc. of the 21th National Conference on Theoretical and Applied Mechanics, Taichung, Taiwan, pp. 55-62 Dec. 1997,
33. M. T. Sheen, C. H. Chen, J. H. Kuang, and W. H. Cheng, "Finite Element Analysis of Thermal Stresses in Laser Packaging," Asia Pacific Symposium on Optoelectronics, Paper no. 3419-15, Taipei, Taiwan. July 9-11, 1998,
34. Y. C. Sheu, C. H. Chen, C. P. Chien, J. H. Kuang, and W. H. Cheng, "Finite Element Analysis of Thermal Stresses in Laser Packaging," Asia Pacific Symposium on Optoelectronics, Paper no. 3419-16, Taipei, Taiwan. July 9-11, 1998,
35. 林阿德,光灼華"正齒對具簡諧激振時之扭轉振動分析,"第十五屆中國機械工程學會學術研討會固力與設計論文集,台灣、 台南、成功大學.pp 543-550. Nov. 27-28, 1998,
36. 蔡銘湖, 林阿德, 光灼華, "齒輪組在雙剛度模式下之動態響應,"第十五屆中國機械工程學會學術研討會固力與設計論文集,台灣、台南、成功大學. pp. 535-542. Nov. 27-28, 1998.
37. 許益誠, 沈茂田, 光灼華, "積體電路組件焊域之應力 分析,"第十五屆中國機械工程學會學術研討會新興工程技術論文集,台灣、 台南、成功大學 .pp 287-294. Nov. 27-28, 1998.
38. 黃松炳，何宗祐,光灼華, "滾子凸輪系統動態分析,"第一屆全國機構與機器設計學術研討會固力與設計論文集,台灣、台南、成 功大學. pp. 141-148. Nov. 28-29, 1998.
39. 林阿德, 光灼華, "囓合正齒對於齒面摩耗下動態負載 之探討,"第一屆全國機構與機器設計學術研討會論文集,台灣、台南、成功大學. pp. 133-140. Nov. 28-29, 1998
40. 張高勳, 黃柏文, 光灼華, "具移動負載下高速磁碟之動 態響應,"第二十二屆力學學會學術研討會論文集,台灣、台南、成功大 學.pp 453-460 Dec. 19-20, 1998.
41. B. W. Huang and J. H. Kuang, "The Effect of Blade Crack on Mode Localization Stability in Rotating Bladed Disks," Proc. of the 22th National Conference on Theoretical and Applied Mechanics, Tainan, Taiwan, pp. 431-438. Dec. 19-20, 1998.
42. J. H. Kuang and B. W. Huang, "A Study on a Pretwisted Tapered Blade with Different Solving Methods,"中國航空 太空學會第四十屆全國學術研討會論文集,台灣、台中、逢甲大學. Dec. 12, 1998.
43. M. H. Tsai, A. D. Lin and J. H. Kuang, "Dynamic Response of an Aircraft Flap Reducer," 中國航空太空學會第四十屆全 國學術研討會論文集,台灣、台中、 逢甲大學. pp. 461-468 Dec. 12, 1998.
44. Tzong-Yow Ho, Chin-Che Hu and Jao-Hwa Kuang, "Dynamic Responses of the Roller Gear Cam System with a Torque Compensation Mechanism,"Proceedings of the 2nd National Conference on the Design of Mechanisms and Machines,Hsinchu Taiwan, National Tsing Hua University. pp. 209-216. Dec. 2-3, 1999.
45. 光灼華, 林阿德, "塑膠/鋼齒對齒面摩耗之探討,"第二屆全國機構與機器設計學術研討會論文集,台灣、新竹、清華大學. pp. 265-272. Dec. 2-3, 1999.
46. 沈茂田, 光灼華, "光電二極體U-Channel裝焊後位移之分 析,"第十六屆中國機械工程學會學術研討會,新興工程技術論文集,台灣、 新竹、清華大學，pp. 658-665.
47. 光灼華,林阿德, Dec. 3-4, 1999, "塑膠齒對齒面摩耗之探討," 第十六屆中國機械工程學會學術研討會, 固力與設計論文集,台灣、新竹、清華大學，pp. 505-511. Dec. 3-4, 1999.
48. 光灼華, 陳郁文，林阿德，謝幸哲, "機械振動對電荷藕合元件影像模糊之影響," 第十六屆中國機械工程
學會學術研討會,製造與材料論文集,台灣、新竹、清華大學，pp. 423-430. Dec. 3-4, 1999.
49. B. W. Huang and J. H. Kuang, "The Mode Localization in a Rotating Cracked Turbo-Disk with Two-Span Beam Model," Proc. of the 23rd National Conference on Theoretical and Applied Mechanics, Shinchu, Taiwan, pp. 427-433. Dec. 17-18, 1999.
50. B. W. Huang, H. K. Kung and J. H. Kuang, "Dynamic Reponses of a Cracked Blade-Disk," Proc. of the 8th National Conference on the Society of Sound and Vibration, Pingtung, Taiwan, pp. 45-50. May 27, 2000.
51. 光灼華, 傅銘田，賴昆, "諧波齒輪之動態分析,"第三屆全國機構與機器設計學術研討會論文集,台灣、高雄、高雄第一科技大學. pp. 79-86. Dec. 8, 2000.
52. 胡晉哲,光灼華, "力矩補償機構對滾子凸輪系統補償探討,"第三屆全國機構與機器設計學術研討會論文集,台灣、高雄、高雄第一科技大學. pp. 187-194. Dec. 8, 2000.
53. 黃博文,光灼華, "The Coupled Longitudinal and Bending Vibrations in a Cracked Blade-Disk," 第十七屆中國機械工程學會學術研討會,固力與設計論文集,台灣、高雄、高雄第一科技大學，pp. 343-349. Dec. 8-9, 2000.
54. 光灼華,徐明宏, "A Study on Vibration of Pretwisted Tapered Blade," 第十七屆中國機械工程學會學術研討會,固力與設計論文集,台灣、高雄、高雄第一科技大學，pp. 643-650. Dec. 8-9, 2000.
55. 徐明宏,光灼華, "Free Vibration Analysis of Annular Plates Solved by the General Differential Quadrature Method," 第十七屆中國機械工程學會學術研討會,固力與設計論文集,台灣、高雄、高雄第一科技大學，pp. 651-656. Dec. 8-9, 2000.
56. 徐明宏, 光灼華, "Eigen Solution of Non-uniform Beams Solved by the General Differential Quadrature Method," 第二十四屆力學學會學術研討會論文集,台灣、中壢、中原大學，J011S. Dec. 9, 2000.
57. 黃柏文,光灼華, "The Effects of Multi Bladed Cracks on Dynamic Characteristics in a Grouped Blade-Disk," 第十六屆全國技術及職業教育研討會，工業類機械組論文集,台灣、花蓮‧April, 2001,
58. Jao-Hwa Kuang, Ah-Der Lin and Kuen Lai, "The Interaction between Contact Load and Tooth Wear of an Engaged Plastic Gear Pair,"第四屆全國機構與機器設計學術研討會論文集,台灣、彰化、大葉大學. pp. 255-261. Nov. 16, 2001.
59. Jao-Hwa Kuang, Chin-Che Hu and Lung-Chang Lu, "A Study on the Dynamic Behavior of the Roller Gear Cam Systems Using Different Torque Compensation Mechanisms,"第四屆全國機構與機器設計學術研討會論文集,台灣、彰化、大葉大‧. pp. 262-269. Nov. 16, 2001.
60. 黃柏文,劉碧發,光灼華, "A Study of Blades Effects on Dynamic Characteristics in a Mistuned System," 第十八屆中國機械工程學會學術研討會,固力與設計論文集, 台灣、台北、台灣科技大學，pp. 271-278. Dec. 7-8, 2001.
61. 光灼華, 許兆民，蕭勝中，陳進明， "面射型雷射二極體模組之殘留應力與位移分析," 第十八屆中國機械工程學會學術研討會新興工程論文集,台灣、台北、台灣科技大學，pp. 407-414. Dec. 7-8, 2001.
62. 光灼華，蕭勝中，陳進明， "錫球承受熱循環與老化試驗時之殘留應力變化," 第十八屆中國機械工程學會學術研討會新興工程論文集,台灣、台北、台灣科技大學，pp. 415-421. Dec. 7-8, 2001.
63. M. H. Hsu, J. H. Kuang, "Eigen Solutions of a Rotating Non-uniform Beam," 第十八屆中國機械工程學會學術研討會,固力與設計論文集, 台灣、台北、台灣科技大學，pp. 133-138. Dec. 7-8, 2001.
64. 光灼華，謝幸哲，謝煥廷， "高速鑽削之動態特性分析," 第十八屆中國機械工程學會學術研討會製造與材料論文集,台灣、台北、台灣科技大學，pp. 165-172. Dec. 7-8, 2001.
65. C. M. Chang, M. T. Sheen, H. C. Teng, J. H. Kuang, K. C. Hsieh and W. H. Cheng, “The Study of Joint Strength of PbSn and AuSn Solders on Thermal Aging in Laser Diode Packages,” Electronics Devices and Materials Symposia Taiwan ’01, Kaohsiung, Taiwan, Paper No. WD1-3, pp.312-316 Dec 12-13, 2001.
66. M. T. Sheen, T. C. Shih, Y. C. Sheu, C. C. Chung, C. S. Wang, P. L. Wu, C. R. Huang, S. K. Hsu, J. H. Kuang, and W. H. Cheng, “Finite-Element Analysis of Post-Weld-Shift Correction in Laser Hammering Technique for Laser Module Packaging,” Electronics Devices and Materials Symposia Taiwan ’01, Kaohsiung, Taiwan, Paper No. WD2-6, pp.358-361 Dec 12-13, 2001.
67. M. H. Hsu, J. H. Kuang, "Dynamic Responses of Electrostatic Curved Electrode Actuators,"第五屆全國機構與機器設計學術研討會論文集,台灣、高雄、國立高雄應用科技大學. pp.546-553. Nov. 22, 2002.
68. 光灼華，盧龍璋，戴文鏗， "諧波驅動器機電整合系統之動態響應," 第十九屆中國機械工程學會學術研討會論文集, B-6-005，台灣、雲林、虎尾技術學院‧Nov. 29-30, 2002.
69. 陳進明，吳政樺，光灼華， "光塞取多工器構裝之殘留應力與銲後位移分析," 第十九屆中國機械工程學會學術研討會論文集, E-4-008，台灣、雲林、虎尾技術學院‧Nov. 29-30, 2002.
70. Jao-Hwa kuang, Lai Kuen and shian-Huan Chiou， " A Study on the Absorptivity of a Pulsed Nd:YAG Laser Welding," 第十九屆中國機械工程學會學術研討會論文集, D-6-005，台灣、雲林、虎尾技術學院‧Nov. 29-30, 2002.
71. 陳朝榮,光灼華, "Electrostatically Deflectable Micro-actuators," 第二十六屆力學學會學術研討會論文集,台灣、雲林、虎尾技術學院，E016. Dec. 20-21, 2002.
72. 謝煥廷，李育仁, 光灼華, "不同加強肋設計之蜂巢夾心板分析," 第二十六屆力學學會學術研討會論文集,台灣、雲林、虎尾技術學院，D011. Dec. 20-21, 2002.
73. 許兆民，劉安展, 光灼華, "不同銲墊設計對錫球迴銲過程殘留應力的影響," 第二十六屆力學學會學術研討會論文集,台灣、雲林、虎尾技術學院，P006. Dec. 20-21, 2002.
74. 劉安展,許兆民， 光灼華, "不同錫球形狀或迴銲過程中其殘留應力的變化," 第二十六屆力學學會學術研討會論文集,台灣、雲林、虎尾技術學院，P007 Dec. 20-21, 2002.
75. 邱顯桓，彭婉貞，光灼華, 李兆偉，呂昱寬，鄭木海， "具微透鏡光纖之試作與分析," 第三屆精密機械製造研討會論文集,台灣、高雄、中山大學，SME-A12-19 Nov. 15, 2003.
76. 謝煥廷、張致瑋、陳鉉盛、陳英傑、光灼華， "複合性蜂巢板剛度之研究," 第二十屆中國機械工程學會學術研討會論文集, C05-04，台灣、台北、國立台灣大學‧Dec. 5-6, 2003.
77. 劉安展、吳政樺、 光灼華、 昝世蓉、 徐儉昱， "錫-銀-銅錫球Coffin-Manson Equation 之建立," 第二十屆中國機械工程學會學術研討會論文集, E05-19，台灣、台北、國立台灣大學‧Dec. 5-6, 2003.
78. 邱顯桓，彭婉貞，光灼華、 昝世蓉、 徐儉昱， " Sn/Pb37與Sn/3.8Ag/0.7Cu用於OSJ銲角之應力分析," 第二十屆中國機械工程學會學術研討會論文集, E05-20，台灣、台北、國立台灣大學‧Dec. 5-6, 2003.
79. Chao-Jung Chen and Jao-Hwa Kuang, “Nonlinear Pull-in Effect of Electrostatic Micro-Actuators by Adomian Decomposition Method,” 第二十屆中國機械工程學會學術研討會論文集, E05-20，台灣、台北、國立台灣大學‧Dec. 5-6, 2003.
80. 邱文俊、吳政樺、光灼華， "錫球推力試驗與有限元素模擬," 第六屆全國機構與機器設計學術研討會暨海峽兩岸機構學學術研討會論文集, pp 622-629，台灣、雲林、國立虎尾技術學院‧Dec. 12-13, 2003.
81. 李育仁、光灼華， "微分值積法," 第六屆全國機構與機器設計學術研討會暨海峽兩岸機構學學術研討會論文集, pp 622-629，台灣、雲林、國立虎尾技術學院‧Dec. 12-13, 2003.
82. 光灼華, 許兆民, "陣列封裝面射型雷射二極體模組殘留應力與位移之分析," 第二十七屆力學學會學術研討會論文集,台灣、台南、成功大學，K333. Dec. 12-13, 2003.
83. 光灼華, 戴文鏗, "考慮血管壁作用力下心血管支架之塑性變形分析," 第二十七屆力學學會學術研討會論文集,台灣、台南、成功大學，N397‧Dec. 12-13, 2003.
84. 光灼華，陳朝榮，；” Nonlinear Pull-in Behavior in Electrostatic Micro-tweezers,” 2004第四屆海峽兩岸製造技術研討會論文集, 中國, 杭州市、浙江大學。Nov. 3-6, 2004.
85. 光灼華、戴文鏗、張光耀, “血管支架塑性成形分析,” 第二十一屆中國機械工程學會學術研討會論文集,，台灣、高雄、國立中山大學.‧Nov. 26-27, 2004.
86. 光灼華、洪宗彬, “Nd:YAG雷射之焊後位移與殘留應力之研究,” 第二十一屆中國機械工程學會學術研討會論文集,，台灣、高雄、國立中山大學.‧ Nov. 26-27, 2004.
87. Bo-wen Huang, and Jao-Hwa Kuang, “The Variation of Instability in a Shrouded Blade-Disk with Local Defects,” 第二十一屆中國機械工程學會學術研討會論文集,台灣、高雄、國立中山大學‧Nov. 26-27, 2004.
88. 光灼華、吳政樺、許兆民、陳鉉盛、劉安展、邱文俊, “錫-銀-銅錫球疲勞壽命公式之研究,” 第二十一屆中國機械工程學會學術研討會論文集,，台灣、高雄、國立中山大學. ‧Nov. 26-27, 2004.
89. 邱顯桓、彭婉貞、光灼華， "光通訊蝶式雷射模組焊後位移之研究," 第七屆全國機構與機器設計學術研討會暨海峽兩岸機構學學術研討會論文集，台灣、台南、崑山科技大學‧Nov. 19, 2004.
90. 林阿德、光灼華， "磨耗過程中金屬與塑膠齒對動態負載之差異分析,"第七屆全國機構與機器設計學術研討會暨海峽兩岸機構學學術研討會論文集，台灣、台南、崑山科技大學‧Nov. 19, 2004.
91. Wen-Keng Tai and Jao-Hwa Kuang, “The Effect of Arterial Lumen on the Deformation of Stent,” 12th Annual Symposium of TSB, 2004第十二屆台灣生物力學學會學術研討會論文集,，台灣、台北、台灣大學醫學院‧Nov. 27, 2004.
92. J. H. Kuang and H. L. Chien, Dec. 2-3, 2004, “Thickness Effect on Mechanical Property Variations of TiN Thin Film on Nanoidentation,” 2004第八屆奈米工程暨微系統技術研討會論文集,，台灣、新竹、清華大學，P-1‧
93. 吳政樺、許兆民、光灼華, “光電封裝VCSEL構件之銲錫疲勞壽命分析,” 第二十二屆中國機械工程學會學術研討會論文集,，E4-017，台灣、中壢、國立中央大學 ‧Nov. 25-26, 2005.
94. 彭婉貞、呂漢威、光灼華, “光通訊錐形透鏡光纖形狀與耦光效率分析,” 第二十二屆中國機械工程學會學術研討會論文集,，E4-012，台灣、中壢、國立中央大學. ‧Nov. 25-26, 2005.
95. 陳寶全、光灼華、陳勇全、張光耀, “多模態塑膠光纖橫斷偏置與角度傾斜之耦光效率分析,” 第二十二屆中國機械工程學會學術研討會論文集,，E4-014，台灣、中壢、國立中央大學‧Nov. 25-26, 2005,
96. 光灼華、陳鉉盛、陳勇諭, “微氣渦輪機結構強度之研究,” 第二十二屆中國機械工程學會學術研討會論文集,，C5-004，台灣、中壢、國立中央大學‧Nov. 25-26, 2005.
97. 洪宗彬、陳穎志、光灼華, "熱循環對蝶式構裝中雷射二極體耦光效率之影響," 第二十九屆力學學會學術研討會論文集,台灣、新竹、清華大學，L010., Dec. 16-17, 2005.
98. 張致瑋、林彥宏、光灼華, "靜電式微共振器空氣薄膜阻尼效應之研究," 第二十九屆力學學會學術研討會論文集,台灣、新竹、清華大學，M023, Dec. 16-17, 2005.
99. .陳寶全、光灼華, "黏彈性有限元素分析壓碎對POF功率衰減之影響探討," 第二十九屆力學學會學術研討會論文集,台灣、新竹、清華大學，L014, Dec. 16-17, 2005.
100. 陳勇諭、簡惠龍、光灼華, "血管支架承受氣球膨脹而擴張之變形分析," 2005生物醫學工程科技研討會論文集,B2-001台灣、中壢、中原大學。Dec. 17, 2005,
101. 光灼華，”Shape Parameters Measurement of Profile-Shifted Spur and Helical Gears,” 2006第五屆海峽兩岸製造技術研討會論文集,FTS-1, 台灣、高雄第一科技大學、April 24-25, 2006
102. 光灼華，洪宗彬ㄝ，”微Nd-YAG脈衝式雷射銲域之研究,” 2006第五屆海峽兩岸製造技術研討會論文集, PM-328, 台灣、高雄第一科技大學、April 24-25, 2006
103. A. D. Lin and J. H. Kuang, “The Bending and Surface Contact Stresses of Engaging Plastic Gear Pair,” 2006 Taiwn-Russia Research Coorporation Symposium, Kaohsiung, Cheng Shiu University, pp. 158-170. 2006
104. 洪宗彬、光灼華, “雙脈衝Nd:YAG雷射銲域之研究,” 第二十三屆中國機械工程學會學術研討會論文集,，D8-002，台灣、台南、崑山科技大學. ‧Nov. 24-25, 2006,
105. 呂漢威、張逸涵、光灼華, “光通訊橢圓形透鏡光纖形狀與耦光效率分析,” 第二十三屆中國機械工程學會學術研討會論文集,，E4-002，台灣、台南、崑山科技大學. ‧Nov. 24-25, 2006,
106. 張光耀、陳寶全、顏家澤、光灼華, “錐狀端面POF對耦光效率之影響探討,” 第二十三屆中國機械工程學會學術研討會論文集,，E4-010，台灣、台南、崑山科技大學‧. Nov. 24-25, 2006,
107. 光灼華、朱訓鵬、孫士傑、翁盟雄、謝男凱, “利用REBO勢能研究空洞式缺陷對鑽石結構振動頻譜改變量之影響,” 第二十三屆中國機械工程學會學術研討會論文集,，E2-028，台灣、台南、崑山科技大學‧ Nov. 24-25, 2006,
108. 陳寶全、光灼華, “對稱Y型POF耦合器耦光效率之研究,” 第二十三屆中國機械工程學會學術研討會論文集,，E4-009，台灣、台南、崑山科技大學. ‧ Nov. 24-25, 2006
109. 林彥宏、羅元壎、洪宗彬、光灼華, “異方性導電膠膜於覆晶結構中之應力與變形分析,” 第二十三屆中國機械工程學會學術研討會論文集,，E5-016，台灣、台南、崑山科技大學‧. Nov. 24-25, 2006,
110. 光灼華、朱訓鵬、孫士傑、翁盟雄、謝男凱， "利用REBO勢能研究缺陷率對鑽石結構振動頻譜之影響",第四屆精密機械與製造技術研討會, pp.B08-1,台灣,墾丁。2006
111. 張光耀、呂漢威、陳寶全、光灼華, "球狀與端面圓化POF對耦光效率之影響探討," 第三十屆力學學會學術研討會論文集,台灣、彰化、大葉大學，L014. Dec. 15-16, 2006.
112. 林彥宏、林育寬、光灼華, "已有現元素法分析異方性導電膠膜於覆晶結構之接觸行為," 第三十屆力學學會學術研討會論文集,台灣、彰化、大葉大學，L015. Dec. 15-16, 2006.
113. 光灼華、張逸涵、陳勇諭、簡惠龍、王怡誠、趙家聲, "血管支架之變形分析," 第三十屆力學學會學術研討會論文集,台灣、彰化、大葉大學，L010. Dec. 15-16, 2006.
114. 陳勇諭，簡惠龍，王怡誠，趙家聲，光灼華，李台民，”考慮血管與斑效應之血管支架變形分析” 2006生物醫學工程科技研討會，論文編號:10088，台北，台灣大學。Dec. 15-16, 2006.
115. 呂漢威、劉佳宜、陳寳全、柯宙芳、光灼華, “橢圓錐狀光纖透鏡參數對耦光效率之分析,” 第二十四屆中國機械工程學會學術研討會論文集,，D20-003，台灣、桃園中壢、中原大學。Nov. 23-24, 2007.
116. 陳寳全、黃重琨、劉佳宜、光灼華, “週期性彎曲模組之塑膠光纖位移感測器,” 第二十四屆中國機械工程學會學術研討會論文集,，D20-003，台灣、桃園中壢、中原大學。Nov. 23-24, 2007.
117. J. H. Kuang and Y. K. Lin and M. C. Chen, “Degradation Analysis of High Power LED Device in Accelerating Test,” 第二十四屆中國機械工程學會學術研討會論文集， E05-0022，台灣、桃園中壢、中原大學。Nov. 23-24, 2007.
118. 黃添勇、杜嘉秦、光灼華， “Bumping 技術之UBM製程過程中各層金屬殘留應力分析” 第三十一屆中國力學學會學術研討會，M12，台灣、高雄、義守大學。Dec. 21-22, 2007.
119. 光灼華、孫士傑、朱訓鵬、黃炯育, "以分子動力學研究碳雜質缺陷對矽鑽石結構振動性質之影響",台灣,高雄義守大學,中華民國力學學會第三十一屆全國力學會議, pp.P-09。Dec. 21-22, 2007.
120. Jao-Hwa Kuang, Hui-Lung Chien, Yung-Yu Chen, “Effects of Artery and Plaque on Stent Expansion,” The 2008 International Symposium on Mechatronic and Biomedical Engineering and Application, Cheng Shiu University, Kaohsiung, Taiwan. (Nov. 05 to 06, 2008)
121. 陳民強、光灼華、劉佳宜，「高速變負載下滾子鏈條應力分布及疲勞分析」，中國機械工程學會第二十五屆全國學術研討會論文集，C04-08彰化、大葉大學。Nov. 21-22, 2008.
122. 羅元壎、光灼華、顏家澤，「高速齒凸輪機構運轉時之動態響應分析」，第十一屆全國機構與機器設計學術研討會，C1N-38965新竹、明新科技大學。Nov. 14, 2008.
123. 黃添勇、杜嘉秦、黃烱育、光灼華，「薄膜濺鍍製程中殘留應力分布與影響」中華民國力學學會第三十二屆全國力學會議、M013，嘉義，中正大學。Nov. 28-29, 2008.
124. 孫士傑、朱訓鵬、黃烱育、光灼華，「以分子動力學研究缺陷大小對矽晶體結構振動性質之影響」奈米研討會、02，彰化、大葉大學。Nov. 28-29, 2008.
125. 黃烱育、孫士傑、蘇品慎、光灼華，「奈米壓痕模擬用於分析局部缺陷對薄膜機械性質之影響」中華民國力學學會第三十三屆全國力學會議、I2-166，苗栗，聯合大學。Nov.13-14, 2009.
126. 宋宜芸、簡惠龍、柯宙芳、光灼華，「奈米壓痕實驗參數與材料表面機械性質之關係」中華民國力學學會第三十三屆全國力學會議、I1391，苗栗，聯合大學。Nov.13-14, 2009.
127. 林昌明、林子翔、光灼華, “雙測點振模測定法用於高速轉子運轉下之操作模態預測”第二十六屆中國機械工程學會學術研討會論文集，B10-018，台灣、台南、成功大學。Nov. 20-21, 2009.
128. 陳佩嫈、劉佳宜、陳寶全、光灼華, “不同填充介質折射率對Y-型POF耦合器耦光效率之影響”第二十六屆中國機械工程學會學術研討會論文集，E10-009，台灣、台南、成功大學。Nov. 20-21, 2009.
129. 蘇筱扉、劉佳宜、陳寶全、光灼華, “光源對透鏡塑膠光纖耦光效率與對位精度關係之影響”第二十六屆中國機械工程學會學術研討會論文集，E10-030，台灣、台南、成功大學,Nov. 20-21, 2009.
130. 劉佳宜、陳寶全、陳鼎鈞、陳勇全、光灼華, "SI及GI塑膠光纖耦光效率之分析,"" 2009年台灣光電科技研討會, BP072, 2009年台灣光電科技研討會（OPT2009）,台灣、台北、師範大學,Dec.. 11-12, 2009.
131. 劉佳宜、陳寶全、陳鼎鈞、陳勇全、光灼華, "不同光源對變折射率塑膠光纖耦光效率之影響," 2009年台灣光電科技研討會, BP073, 2009年台灣光電科技研討會（OPT2009）,台灣、台北、師範大學, Dec.. 11-12, 2009.
132. 顏家澤、柯宙芳、光灼華, “轉移矩陣法用於凸輪系統響應之分析,” 第十二屆全國機構與機器設計學術研討會論文集,C0054, 台灣,嘉義,中正大學,Nov. 06, 2009.
133. 黃智煒，黃光裕，林博正，光灼華，蔡得民,“高速軋盒機間歇機構設計與製造,” 第八屆海峽兩岸三地先進製造研討會，台灣，台北，台灣大學, April 25, 2010.
134. Guan-Shyong Hwang, Chung-Chi Lin, Wei-Hsiang Liao, Der-Min Tsay , Jao-Hwa Kuang, and Tzuen-Lih Chern, “Kinematic analysis of a novel independently controllable transmission mechanism with a parallel type,” 第十三屆全國機構與機器設計學術研討會論文集,論文編號260028, 台灣,台北,台灣大學,OCT. 22, 2010.
135. 柯宙芳, 陳弘凱, 光灼華,“可變慣性矩飛輪對高速間歇機構動態特性之影響,”第十三屆全國機構與機器設計學術研討會論文集,論文編號260021, 台灣,台北,台灣大學,OCT. 22, 2010.
136. 陳鼎鈞、陳弘凱、光灼華, “壓電圓盤自然頻率值用於壓電材料參數之擷取,”中國機械工程學會第二十七屆全國學術研討會, E-近代工程與跨領域研究組, 台灣、台北、國立台北科技大學, pp.446-451, 2010.
137. 李敏瑋、侯凌軒、光灼華,“玻璃螢光體應用於高功率白光發光二極體之光場與熱場分析,”中國機械工程學會第二十七屆全國學術研討會, E-近代工程與跨領域研究組, 台灣、台北、國立台北科技大學, pp.1243-1248, 2010.
138. 林子翔、侯凌軒、光灼華,“雷射熱破裂技術於切割脆性材料之模擬分析,”中國機械工程學會第二十七屆全國學術研討會, E-近代工程與跨領域研究組, 台灣、台北、國立台北科技大學, pp.153-158, 2010.
139. 柯宙芳、楊仲軒、光灼華,“可變慣性矩飛輪對滾子凸輪機構動態特性之影響,”中國機械工程學會第二十七屆全國學術研討會, B-動力與控制組, 台灣、台北、國立台北科技大學, pp.531-536, 2010.
140. 鍾岳勳、詹瑋億、光灼華,“微渦流扇葉片結構強度之研究,”中國機械工程學會第二十七屆全國學術研討會, C-固力與設計組, 台灣、台北、國立台北科技大學, pp.579-584, 2010.
141. 林重琪、黃冠雄、蔡得民、光灼華與陳遵立，2010，”可獨立控制傳動機構之實驗分析與實證”，中國機械工程學會第二十七屆全國學術研討會，論文編號： BB06-008，台灣、台北、國立台北科技大學, pp.579-584, 2010.
142. 蘇品慎、蕭先佑、光灼華，”有限元素法應用於盲孔法之分析與模擬,”中華民國力學學會第三十四屆全國力學會議，台灣雲林，國立雲林科技大學, Nov. 19-20, 2010.
143. 光灼華、許兆民，” Sn/3.0Ag/0.5Cu 錫球拉力與剪力型潛變實驗之研究,”中華民國力學學會第三十四屆全國力學會議，台灣雲林，國立雲林科技大學, Nov. 19-20, 2010.
144. 邱姵茹、簡惠龍、陳弘凱、光灼華，“利用不同比率之奈米壓痕卸載曲線資料探討牙齒之楊氏模數,”中華民國力學學會第三十四屆全國力學會議，台灣雲林，國立雲林科技大學, Nov. 19-20, 2010
145. 林重琪、黃冠雄、蔡得民、光灼華、陳遵立、廖偉向，"可獨立控制傳動機構於風力發電應用之實驗分析與實證" ，臺灣風能學術研討會，台灣澎湖。Dec. 17-18,2010
146. Guan-Shyong Hwang, Wei-Hsiang Liao, Der-Min Tsay, Jao-Hwa Kuang, and Tzuen-Lih Chern, “Dynamic Analysis and Verification of a Parallel-Type Independently Controllable Transmission,” The 11th International Conference on Automation Technology, Douliou, Yunlin, Taiwan, 2011, Paper No. G004, Nov. 18-21, 2011
147. 陳遵立，劉立祥，潘屏榮，黃聰謀，蔡得民，光灼華，”以DSP為基礎高效率無感測直流變頻壓縮機驅動器之研製”，第十屆海峽兩岸冷凍空調學術曁技術交流會，台灣台北，國立台北科技大學, Dec. 1-2, 2011
148. 郭佳育、蕭先佑、光灼華,“雙輸入行星齒輪機構系統安全係數響應,”中國機械工程學會第二十八屆全國學術研討會論文集, 論文編號: C07-013, 台灣、台中市、國立中興大學, Dec.10-11,2011.
149. 汪晨暉、侯凌軒、光灼華,“高功率磊晶佈列對玻璃螢光二極體之光場影響,”中國機械工程學會第二十八屆全國學術研討會論文集, 論文編號: E06-006, 台灣、台中市、國立中興大學, Dec.10-11,2011.
150. 陳弘凱、李岡晏、光灼華,“耦合渦輪葉片組之動態特性分析,”中國機械工程學會第二十八屆全國學術研討會論文集, 論文編號: C08-012, 台灣、台中市、國立中興大學, Dec.10-11,2011.
151. 侯凌軒、黃斌哲、邱姵茹、光灼華“固晶材料對高功率白光二極體之溫度與熱應力分佈,”中國機械工程學會第二十八屆全國學術研討會論文集, 論文編號: E06-004, 台灣、台中市、國立中興大學, Dec.10-11,2011.
152. 廖偉向，黃冠雄，蔡得民，光灼華，與陳遵立，2011，“並聯型可獨立控制傳動機構動態分析及實證”，中國機械工程學會第二十八屆全國學術研討會，台灣、台中市、國立中興大學, Dec.10-11, 2011.
153. 陳遵立，劉立祥，陳韋廷，蘇謙懷，蔡得民，光灼華，黃冠雄，潘屏榮，黃聰謀，”應用於風力發電之激磁式同步發電機最大功率追蹤控制方法”，2011台灣風能學術研討會，G2-006，台灣台南成功大學，2011年12月16日。
154. 廖偉向，黃冠雄，蔡得民，光灼華，與陳遵立， "並聯型可獨立控制傳動機構於風力發電應用之動態分析及實證" ，臺灣風能學術研討會，成功大學，台南，台灣，2011年12月16日。
155. 陳弘凱、詹瑋億、光灼華，”模態合成法用於端接渦輪葉片組之動態特性分析”，中華民國力學學會第三十五屆全國力學會議，E1-007, 台灣台南成功大學，November 18-19, 2011，pp1159-1166
156. 曾柏融、楊仲軒、光灼華，” 蝸輪組嚙合齒間之負載比”，中華民國力學學會第三十五屆全國力學會議，台灣台南成功大學，November 18-19, 2011，pp1429-1433
157. 魏廷霖、簡惠龍、詹瑋億、光灼華，“奈米壓痕試驗用於牙齒楊氏模數之測定,” 中華民國力學學會第三十五屆全國力學會議， 台灣台南成功大學，November 18-19, 2011，pp1899-1902
158. 蕭先佑，楊仲軒，光灼華，“雙輸入型風機傳動機構之動力流分析,”第十四屆全國機構與機器設計學術研討會論文集,論文編號C-016, 台灣,中壢,中央大學,Nov. 04, 2011. pp1-8
159. 蕭培需，楊仲軒，光灼華，“捲揚機在不同操作條件下之安全係數變化,”第十四屆全國機構與機器設計學術研討會論文集,論文編號C-013, 台灣,中壢,中央大學,Nov. 04, 2011. pp1-8
160. 侯凌軒，邱姵茹，黃斌哲，光灼華，“散熱鰭片對高功率二極體溫度與熱應力之影響,”第十四屆全國機構與機器設計學術研討會論文集,論文編號M-001, 台灣,中壢,中央大學,Nov. 04, 2011. pp1-8
161. Hwang, G. S., Lin, C. C., Tsay, D. M., Kuang, J. H., and Chern, T. L., “Dynamic Analysis and Verification of a Parallel-Type Independently Controllable Transmission,” the 11th International Conference on Automation Technology, Douliou, Yunlin, Taiwan, November 18-20, 2011
162. Hwang, G. S., Tsay, D. M., Kuang, J. H., and Chern, T. L., “Kinematic and Dynamic Analyses of a Series-Type Independently Controllable Transmission Mechanism,”International Conference on Advanced Manufacturing, Yilan, Taiwan, March 4-8, 2012
163. 陳遵立、劉立祥、陳韋廷、蘇謙懷、蔡得民、光灼華、黃冠雄、潘屏榮、黃聰謀，2012，"一創新風力發電之激磁式同步發電機系統架構"，101年度台電節約能源論文發表會，4 月24 日，高雄，台灣，2012年4 月24 日
164. M. Z. Wong, P.J. Chiu, B.W. Haung, J.-G. Tseng and Jao-Hwa Kuang,” Nano-indentation Measurement for Young's modulus of the Human Tooth Enamel,” 2012 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, Nov. 11, 2012
165. 詹偉憶、邱姵茹、光灼華，“發光二極體封裝之雷射共晶固晶製程,”中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號: E06-1114, 台灣、高雄市、國立中山大學, Dec.07-08,2012.
166. 王竹豪、邱姵茹、光灼華，“雙焦雷射應用於太陽能電池板熱加工之模擬分析,”中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號: E06-1667, 台灣、高雄市、國立中山大學, Dec.07-08,2012.
167. 林思嘉、邱姵茹、光灼華，“含磷螢光粉低溫菲涅爾LED玻璃透鏡之分析,”中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號: E06-1732, 台灣、高雄市、國立中山大學, Dec.07-08,2012.
168. 尹春和，許兆民，光灼華，“鎳基 690 合金平板對接銲道之溫度與殘留應力場之分析,” 中華民國力學學會第三十六屆全國力學會議， 台灣中壢中央大學，W006，November 16-17, 2012
169. 黃斌哲，李岡晏，光灼華，“高功率螢光玻璃發光二極體模組之溫度與熱應力分佈,” 中華民國力學學會第三十六屆全國力學會議， 台灣中壢中央大學，W006，November 16-17, 2012
170. 翁士茗，李岡晏， 光灼華，“溫度與負載對轉位塑膠齒強度的影響,”第十五屆全國機構與機器設計學術研討會論文集,論文編號C-007, 台灣,台南,南台科技大學,Nov. 02, 2012. pp 299-306
171. 楊仲軒，林阿德，吳尚鴻，光灼華，“雙輸入型風機傳動機構之強度最佳化分析,”第十五屆全國機構與機器設計學術研討會論文集,論文編號C-012, 台灣,台南,南台科技大學,Nov. 02, 2012. pp 325-332
172. 陳遵立、蔡得民、光灼華、黃冠雄、潘屏榮、陳韋廷、蘇謙懷、黃聰謀，”一創新激磁式同步發電機之風力發電系統架構，2012台灣風能學術研討會，G3-006，台灣新竹，交通大學，2012年12月09日。
173. Ah-Der Lin, Chung-Hsuan Yang, Der-Min Tsai, Guan-Shyong Hwang, Tzuen-Lih Chen, Chao-Ming Hsu and Jao-Hwa Kuang,”Power Flow Analysis for the Small Wind Turbine Systems,”，2012台灣風能學術研討會，G2-16，台灣新竹，交通大學，2012年12月09日。
174. 廖玉晨、楊仲軒、光灼華，「雙輸入軸小型風機發電特性之研究」，2012台灣風能學術研討會，G3-006，台灣新竹，交通大學，2012年12月09日。
175. 黃冠雄，沈鳴奇，王玟丰，林志霖，蔡得民，光灼華，林博正，彭昭暐，“具增速穩速及功率分流功能之傳動機構,”第十六屆全國機構與機器設計學術研討會論文集,論文編號conf-072_2, 台灣,新竹,清華大學,Nov. 01, 2013.
176. 汪廷曜、邱姵茹、光灼華，“雙焦雷射波長對太陽能電池P1加工的影響,”第十六屆全國機構與機器設計學術研討會論文集,論文編號：conf-051_1, 台灣,新竹,清華大學,Nov. 01, 2013.
177. 李岡晏、陳建安、光灼華，“蝸桿蝸輪嚙合齒對間之負載與應力分佈及強度設計,”第十六屆全國機構與機器設計學術研討會論文集,論文編號：conf-051_1, 台灣,新竹,清華大學,Nov. 01, 2013.
178. 吳尚鴻 、吳守陶、光灼華，“偏心凸輪式減速機構之強度設計,”第十六屆全國機構與機器設計學術研討會論文集,論文編號：conf-051_1, 台灣,新竹,清華大學,Nov. 01, 2013.
179. 邱姵茹、盧彥碩、光灼華，“雙雷射束畫線製程應用於薄膜太陽能電池之研究,”中國機械工程學會第三十屆全國學術研討會論文集, 論文編號: xxxx, 台灣、宜蘭市、國立宜蘭大學, Dec.06-07,2013.
180. 葉祐良、盧彥碩、光灼華，“致冷晶片用於高功率LED散熱之影響,”中國機械工程學會第三十屆全國學術研討會論文集, 論文編號: xxxx, 台灣、宜蘭市、國立宜蘭大學, Dec.06-07,2013.
181. 黃冠雄、林志霖、沈鳴奇、王玟丰、蔡得民、光灼華、林博正與彭昭暐，”可獨立控制傳動機構於油電混合車之應用分析”，中國機械工程學會第三十屆全國學術研討會，宜蘭，台灣國立宜蘭大學, Dec.06-07, 2013.
182. 黃冠雄、沈鳴奇、王玟丰、林志霖、蔡得民、光灼華、林博正、彭昭暐，「應用於風機之新型可調控增速穩速分流傳動系統」，2013台灣風能學術研討會，台灣基隆，國立臺灣海洋大學，2013年12月05日。CSMMT2013-1-6
183. 陳建安、李弘偉、光灼華，“錘型微致動器之動態特性分析,” 中華民國力學學會第三十八屆全國力學會議，論文編號： N-09-737, 台灣基隆國立海洋大學，November 21-22, 2014
184. 光灼華，王鵬瑞，“鋼質滾珠鍍膜對其接觸應力之影響,”第十七屆全國機構與機器設計學術研討會論文集,論文編號：xxxxxx, 台灣,台中,國立勤益科技大學,Nov. 14, 2014.
185. 吳守陶，徐嵩博，光灼華，“穿透式雷射二極體色輪模組之熱效應分析,”第十七屆全國機構與機器設計學術研討會論文集,論文編號：O-002, 台灣,台中,國立勤益科技大學,Nov. 14, 2014.
186. 光灼華，褚昱良“應力溝參數對干涉配合應力集中影響之分析,”第十七屆全國機構與機器設計學術研討會論文集,論文編號：D005, CSMMT2014-1-6，台灣,台中,國立勤益科技大學,Nov. 14, 2014
187. 光灼華，程雲豪“鼓形量對鑄鋼齒強度之影響,”第十七屆全國機構與機器設計學術研討會論文集,論文編號：C001, CSMMT2014-1-6，台灣,台中,國立勤益科技大學,Nov. 14, 2014
188. 吳守陶，黃柏維，光灼華，”反射式雷射二極體色輪模組之熱效應分析，”中國機械工程學會第三十一屆全國學術研討會，論文編號：01465,台中，逢甲大學, Dec.06-07,2014.
189. 盧彥碩、韋秀逸、光灼華，”高功率LED熱電散熱模組之分析，”中國機械工程學會第三十一屆全國學術研討會，論文編號：03473,台中，逢甲大學, Dec.06-07,2014.
190. 李弘偉、石浩恩、光灼華，“ 齒輪參數對環式螺旋齒應力分佈之關係,”第十八屆全國機構與機器設計學術研討會論文集,論文編號：C-008, 台灣,台北,國立台灣科技大學,Oct. 28, 2015.
191. 郭彧伶、光灼華，“哥德式線性滑軌滾珠及滑軌參數與接觸應力之關係,”第十八屆全國機構與機器設計學術研討會論文集,論文編號：G-001, 台灣,台北,國立台灣科技大學,Oct. 28, 2015.
