跳到主要內容區

Top

◎ 期刊論文(J. H. Kuang)

A.   期刊論文  (Refereed Journal Papers)

1.              J. H. Kuang, Y. G. Tsuei, "A More General Method of Substructure Mode Synthesis for Dynamic Analysis," Transaction of AIAA Journal, Vol. 23, No. 4, pp. 619-623. (April, 1985) (SCI & EI )

2.              J. H. Kuang, Y. T. Yang, "A Reconsideration of the Geometry Factor for the Standard and Profile Shifted Teeth," Transaction of ASME, Journal of Mechanisms, Transmissions and Automation in Design, Vol. 111, No. 3, pp. 402-413. (Sept. 1989) (SCI & EI)

3.              J. H. Kuang, A. H. Liu, "A Study of the Stress Concentration Factor on Spot Welds," Welding Journal, Vol. 69, No. 12, pp. 468-474. (Dec. 1990), (SCI & EI)

4.              J. H. Kuang, J. H. Tsai, "An Improved Branch Method for Gear-Coupled Systems," Journal of the Chinese Society of Mechanical Engineering, Vol. 12 No. 2, pp. 177-187, (April 1991)(EI)

5.              L. S. Chen, J. H. Kuang, "A Modified Linear Extrapolation Formula for Determination of Stress Intensity Factors," International Journal of Fracture, Vol. 54, No. 1, pp. R3-R8. (March 1992) (SCI & EI)

6.              L. S. Chen, J. H. Kuang, "A Displacement Extrapolation Method for Determining the Stress Intensity Factors along Flaw Border," International Journal of Fracture, Vol. 57, No. 4, pp. R51-R58. (Oct. 1992) (SCI & EI)

7.              L. S. Chen, J. H. Kuang, "Comparison of Two Quarter-Point Element Extrapolation Equations for Three-Dimensional Mixed-Mode Problems," Journal of Engineering Fracture Mechanics, Vol. 45, No. 1, pp. 21-33. (1993) (SCI & EI)

8.              L. S. Chen, J. H. Kuang, "A Displacement Extrapolation Method for Two Dimensional Mixed-Mode Crack Problems," Journal of Engineering Fracture Mechanics, Vol. 46, No. 5, pp. 735-741. (1993) (SCI & EI)

9.              J. H. Kuang, C. Y. Lee, "A Recycled Guyan Condensation Method for the Structural Dynamic Analysis," Journal of the Chinese Society of Mechanical Engineering,, Vol. 14, No. 6., pp. 553-560. (Dec. 1993 )(EI)

10.           J. H. Kuang, L. S. Chen, "Comparison of Displacement Extrapolation to the 'Benchmark' Surface Crack Problems," Journal of Engineering Fracture Mechanics, Vol. 47, No. 4, pp. 473-477. (March 1994)(SCI & EI)

11.           J. H. Kuang, L. S. Chen, "A Single Strain Gage Method for Determining the Stress Intensity Factor KI," Journal of Engineering Fracture Mechanics, Vol. 51, No. 5, pp. 871-878. (1995)(SCI & EI)

12.           J. H. Kuang, Y. C. Chen, "Crack Initiation Direction for a Crack under Mixed Mode Loading," International Journal of Fracture, Vol. 73, No. 2, pp. R33-37. (1995) (SCI & EI)

13.           J. H. Kuang, Y. C. Chen, "Crack Initiation Load Characterization Using Critical Energy," Journal of Engineering Fracture Mechanics, Vol. 53, No.4, pp. 571-580. (1996)(SCI & EI)

14.           J. H. Kuang, A. D. Lin, "Frequency Spectra of an Engaging Gear Pair," Journal of Nondestructive Evaluation, Vol. 14, No. 3, pp. 169-174. (1996)（EI）

15.           J. H. Kuang, W. L. Chen, "Determination of Tip Parameters for the Protuberance Preshaving Cutters," Journal of Mechanism and Machine Theory, Vol. 7, pp. 839-849. (1996)(SCI & EI)

16.           J. H. Kuang, Y. C. Chen, "The Values of J-Integral within Plastic Zone," Journal of Engineering Fracture Mechanics, Vol. 55, No. 6, pp. 869-981. (Nov.,1996) (SCI & EI ).

17.           J. H. Kuang, Y. C. Chen, "The Tip Plastic Energy Applied to Ductile Fracture Initiation under Mixed-Mode Loading," Journal of Engineering Fracture Mechanics, Vol. 58, Issue 1-2, pp. 61-70. (Sept. 1997)(SCI & EI)

18.           J. H. Kuang, Y. C. Chen, "The Effect of Tip Plastic Energy on Mixed-Mode Crack Initiation," International Journal of Fracture, Vol. 83, No. 4, pp. 393-402, (1997) (SCI & EI)

19.           W. H. Cheng, Y. D. Yang, S. C. Wang, and J. H. Kuang, "Effect of Au Thickness on Laser Beam Penetration in Semiconductor Laser Packages," IEEE Transactions on Components, Packaging and Manufacturing Technology, Part B, Vol. 20, No. 4, pp. 396-402. (Nov. 1997) (SCI & EI)

20.           W. H. Cheng, W. H. Wang, Y. D. Yang and J. H. Kuang, "Effects of Au Coating on Thermal Stresses in Stainless-to-Kovar Packages," Int. J. of Optical and Quantum Electronics, Vol. 29, pp 939-951 (1997) (SCI & EI)

21.           J. H. Kuang, C. K. Chen, "Crack Tip Plastic Zones Estimation Using Bueckner's Superposition," International Journal of Fracture, Vol. 88, No.2, L39-L44. (1998)(SCI & EI)

22.           J. H. Kuang, C. K. Chen, "The Failure of Ligaments due to Multiple-Site Damage Using Interactions of Dugdale Type Cracks," Fatigue & Fracture of Engineering Materials & Structures, Vol. 21, No. 9, pp 1147-1157 (Sept. 1998) (SCI and EI)

23.           J. H. Kuang, C. K. Chen, "Equivalence for Two Interacting Parallel Cracks," Transaction of ASME, Journal of Pressure Vessel Technology, Vol. 120, No. 4, pp 424-430. (Nov. 1998)

24.           W. H. Cheng, M. T. Sheen, J. H. Kuang, and C. H. Chen, "The Principle Causes of Crack Defects in Optoelectronic Materials with Phosphorus-Containing Underlayer," J. of Electronic Materials, Vol. 28, No. 1, pp. 50-56, (Jan, 1999) (SCI, EI)

25.           J. H. Kuang, Y. W. Chen, "The Effect of Residual Vibration on the CCD Image Resolution," OPTO News & Letters, No. 76, pp 34-39. (Feb. 1999)

26.           J. H. Kuang, M. T. Sheen, S. C. Wang, C. H Chen and W. H. Cheng, "Crack Formation Mechanism in Laser-Welded Au-Coated Invar Materials for Semiconductor Laser Packaging," IEEE Transactions on Components, Packaging and Manufacturing Technology, Part B, Advanced Packaging, Vol. 22, No. 1, pp 94-100 (Feb. 1999) (SCI & EI)

27.           W. H. Cheng, Y. D. Yang, T. C. Liang, G. L. Wang, M. T. Sheen and J. H. Kuang, "Thermal Stresses in Box-Type Laser Packages," Int. J. of Optical and Quantum Electronics, Vol. 31, No. 4, pp 293-302 (1999) (SCI & EI) (NSC 87-2215-E110-006)

28.           J. H. Kuang, B. W. Huang, "Mode Localization of a Cracked Bladed Disk," Transactions of ASME, Journal of Engineering for Gas Turbines and Power, Vol. 121, No. 2, pp 335-341. (April 1999) (SCI and EI)

29.           W. H. Cheng, M. T. Sheen, J. H. Kuang, and C. H. Chen, "The Principle Cause of Crack Defects in Optoelectronic Materials with Phosphorus-Containing Underlayer," J. of Electronic Materials, Vol. 28, No.1, pp 50-56. (1999) (SCI & EI)

30.           J. H. Kuang, C. K. Chen, "Alternating Iteration Method for Interacting Multiple Crack Problems," Fatigue & Fracture of Engineering Materials & Structures, Vol. 22, No. 9, pp. 743-752, (Sept. 1999) (SCI and EI)

31.           J. H. Kuang, B. W. Huang, "The Effect of Blade Crack on Mode Localization in Rotating Bladed Disks," Journal of Sound and Vibration, Vol. 227, No. 1, pp. 85-103 (Oct. 1999) (SCI and EI)

32.           J. H. Kuang, A. D. Lin and John Yu, "Dynamic Load Simulation for Profile Shifted Spur Gear Pairs," Journal of the Chinese Society of Mechanical Engineering, Vol. 20, No. 5, pp. 417-424  (Dec., 1999) (EI)

33.           W. H. Cheng, M. T. Sheen, C. P. Chien, H. L. Chang and J. H. Kuang, "Reduction of Fiber Alignment Shifts in Semiconductor Laser Module Packaging," Joint IEEE/OSA Transactions, Journal of Lightwave Technology, Vol. 18, No. 6, pp. 842-848. (June, 2000) (SCI, EI)

34.           J. H. Kuang and C. K. Chen, "On the Use of Strip Yield Approach for Multiple-Site Damage Failure Scenarios," AIAA Transactions, Journal of Aircraft, Vol. 37, No. 5, pp. 887-891. (Sept., 2000) (SCI, EI)

35.           J. H. Kuang, M. T. Sheen, S. C. Wang, G. L. Wang and W. H. Cheng, "Post-Weld-Shift in Dual-in-Line Package," IEEE Transactions on Advanced Packaging, Vol. 24, No. 1, pp 81-85. (Feb., 2001) (SCI, EI)

36.           B. W. Huang, and J. H. Kuang, "Mode Localization in a Rotating Mistuned Turbo Disk with Coriolis Effect," International Journal of Mechanical Sciences, Vol. 43, No. 7, pp. 1643-1660 (July, 2001) (SCI, EI)

37.           J. H. Kuang, and A. D. Lin, " The Effect of Tooth Wear on the Vibration Spectrum of a Spur Gear Pair," ASME Transactions, Journal of Vibration and Acoustics, Vol. 123, No. 3, pp. 311-317 (July, 2001)(SCI, EI)

38.           W. H. Cheng, M. T. Sheen, G. L. Wang, S. C. Wang and J. H. Kuang, “Fiber Alignment Shift Formation Mechanisms of Fiber-Solder-Ferrule Joints in Laser Module Packaging,” Joint Transactions of IEEE/OSA, Journal of Lightwave Technology, Vol. 19,No.8, pp. 1177-1184 (August, 2001) (SCI, EI)

39.           J. H. Kuang, M. T. Sheen, C. H. Chang, C. C. Chen, G. L. Wang, and W. H. Cheng, “Effect of Temperature Cycling on Joint Strength of PbSn and AuSn Solders in Laser Packages,” IEEE Transactions on Advanced Packaging, Vol. 24, No.4, pp. 563-568 (Nov., 2001)(SCI, EI)

40.           B. W. Huang, J. H. Kuang, “The Effect of Local Crack on the Dynamic Characteristics of a Rotating Grouped Blade-Disk,” Proceedings of the Institution of Mechanical Engineering IMechE, Part C, Journal of Mechanical Engineering, Vol. 216, pp 447-457, (2002) (SCI, EI)

41.           Jao-Hwa Kuang,  Ah-Der Lin, “Theoretical Aspects of the Dynamic Responses in an engaging Spur Gear Pair,” Journal of the Chinese Society of Mechanical Engineers, Vol. 23, No. 1, (June, 2002), pp. 213-221 (EI)

42.           M. T. Sheen, C. M. Chang, H. C. Teng, J. H. Kuang, K. C. Hsich and W. H. Cheng, “The Influence of Thermal Aging on Joint Strength and Fracture Surface of Pb/Sn and Au/Sn Solders in Laser Diode Packages,” Journal of Electronic Materials, Vol. 31, No. 8, pp. 895-905, (August, 2002) (SCI,EI)

43.           Y. C. Chen, J. H. Kuang, “Hertz Contact Stress Variations near the Insulated Rail Joints,” Proceedings of the Institution of Mechanical Engineering IMechE, Part F, Journal of Rail and Rapid Transit., Vol. 216, pp. 265-273 (2002) (SCI, EI)

44.           J. H. Kuang, and M. H. Hsu, "Eigensolutions of Grouped Turbo Blades Solved by Using the Generalized Differential Quadrature Method," ASME Transactions, Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 4, pp. 1011-1017, (Oct. 2002) (SCI, EI)

45.           J. H. Kuang, and M. H. Hsu, “The Effect of Fiber Angle on the Natural frequencies of Orthotropy Composite Pre-twisted Blades," Journal of Composite Structures, Vol. 58, No. 4, pp. 457-468 (Dec. 2002), (SCI, EI)

46.           J. H. Kuang and  A. D. Lin, " Theoretical Aspects of Torque Responses in Spur Gearing Due to Mesh Stiffness Variation," Journal of Mechanical Systems and Signal Processing MSSP , Vol. 17, Issue 2, pp 255-271,(March, 2003) (SCI, EI)

47.           C. S. Hsieh, J. M. Chen, J. M. Hsu, M. T. Sheen, J. H. Kuang, and W. H. Cheng, "Effect of Temperature Cycling on Angular Alignment on Angular Alignment in Add/Drop Filter Module Packaging," J. of Electronic Materials, Vol. 32, No. 3, pp. 137-141, (March, 2003) (SCI, EI)

48.           Yuang Chuan Chen, Jao-Hwa Kuang, “End Effects of Rail Joints on the Wheel-Rail contact Stress Distribution,” Journal of the Chinese Society of Mechanical Engineers, Vol. 24, No. 5, pp.459-466  (Oct., 2003) (EI)

49.           Jao-Hwa Kuang and Chao-Jung Chen, “Dynamic Characteristics of Shaped Micro-Actuators Solved Using the Differential Quadrature Method,” Journal of Micromechanics and Microengineering, Vol. 14, pp. 647-655 (Feb., 2004) (SCI, EI)

50.           Yung-Chuan Chen and Jao-Hwa Kuang, “Partial Slip Rolling Wheel-Rail Contact with a Slant Rail Crack,” ASME Transactions, Journal of Tribology, Vol. 126, pp. 450-458 (July 2004) (SCI, EI)

51.           J. H. Kuang, A. D. Lin, T. Y. Ho and S. B. Huang, “Dynamic Responses of a Globoidal Cam System,”ASME Transactions, Journal of Mechanical Design, Vol. 126, pp. 909-915, (Sept. 2004) (SCI, EI)

52.           Yi-Cheng Hsu, Ying-Chien Tsai, Yeh-lin Ho, M. T. Sheen, Jao-Hwa Kuang and Wood- Hi Cheng, "A Novel Fiber Alignment Shift Measurement and Correction Technique in Laser-Welded Laser Module Packaging," Joint IEEE/OSA Transactions, Journal of Lightwave Technology, Vol. 23, No. 2, pp. 486-494. (Feb., 2005) (SCI, EI)

53.           Bo-Wen Huang and Jao-Hwa Kuang, "The Variation of Instability in a Shrouded Blade-Disk with Local Defects," Journal of the Chinese Society of Mechanical Engineering, Vol. 26, No. 2, pp. 185-194  (April., 2005) (EI)

54.           Jao-Hwa Kuang and Chao-Jung Chen, "Adomian Decomposition Method Used for Solving Nonlinear Pull-in Behaviors in Electrostatic Micro-actuators," J. of Mathematical and Computer Modelling, Vol. 41, No. 9, pp. 1479-1491 (2005); (SCI, EI)

55.           Jao-Hwa Kuang and Chao-Ming Hsu, "The Residual Stress and Post-Weld-Shift Distributions in VCSEL Packaging," Engineering Science & Technology Bulletin NSC, Vol. 81, pp. 168-171 (August, 2005)

56.           Jao-Hwa Kuang and Chao-Jung Chen, “The Nonlinear Electrostatic Behavior for Shaped Electrode Actuators," International Journal of Mechanical Sciences, Vol. 47, Issue 8, pp. 1172-1190, (August, 2005) (SCI, EI)

57.           Yung-Chuan Chen and Jao-Hwa Kuang, “Elastic-Plastic Partial Slip Rolling Wheel-Rail Contact with an Oblique Rail Crack,” ASME Transactions, Journal of Tribology, Vol. 127, pp. 705-712 (October 2005) (SCI, EI)

58.           Yi-Cheng Hsu, Ying-Chien Tsai, Jao-Hwa Kuang and Wood- Hi Cheng, "Postweld-Shift-Induced Fiber Alignment Shifts in Laser-Welded Laser Module Packages: Experiments and Simulations," Joint IEEE/OSA Transactions, Journal of Lightwave Technology, Vol. 23, No. 12, pp. 4287-4295. (Dec., 2005) (SCI, EI)

59.           B. W. Huang, J. H. Kuang, “Variation in the Stability of a Rotating Blade-Disk with a Local Crack Defect” Journal of Sound and Vibration, Vol. 294, No 3, pp. 486-502, (Feb., 2006) (SCI, EI)

60.           Bo-Wen. Huang, Huang-Kuang Kung and Jao-Hwa. Kuang, “Stability in a Twisted Periodic Blade System with Cracks” AIAA Journal, Vol. 44, No. 7,pp.1436-1444, (July, 2006) (SCI, EI)

61.           Yung-Chuan Chen, Jao-Hwa Kuang, Li-Wen Chen and Hua-Chun Chuang “Effect of plastic strain energy density on polymer optical fiber power losses,” Optics Letters, Vol. 31, No.7, pp879-881(April 01,2006) (SCI, EI)

62.           Y. C. Hsu, J. H. Kuang, Y. C. Tsai and W. H. Cheng “Investigation and Comparison of Post-Weld Shift Compensation technique in TO-Can and Butterfly Types Laser-Welded Laser Module Pacjages,” IEEE Tran. J. Sel. Topics Quantum Electron, Vol. 12, No. 5, pp. 961-969 (Sept.,2006) (SCI, EI)

63.           Yung-Chuan Chen, Pao-Chuan Chen, Jao-Hwa Kuang,” Effect of Elongation Deformation on Power Losses in Polymer Optical Fibers,” Applied Optics, Vol. 45, No. 26, pp. 6668-6674, (September 10, 2006) (SCI, EI)

64.           Bo-Wun Huang, Jao-Hwa. Kuang, , “The Parameter Resonance Instability in a Drilling Process,” ASME Transactions, Journal of Applied Mechanics, Vol. 74, , pp. 958-964, (September, 2007) (SCI, EI)

65.           Yi-Cheng Hsu, Ying-Chien Tsai, Jao-Hwa Kuang, Maw-Tien Sheen,Pu-Hsien Hsu, and Wood-Hi Cheng, " A Notch-Saddle-Compensation Technique in Butterfly-Type Laser Module Packages," Joint IEEE/OSA Transactions, Journal of Lightwave Technology, Vol. 25, No. 6, pp. 1594-1601 , (June, 2007) (SCI, EI)

66.           Yi-Cheng Hsu, Jao-Hwa Kuang, Ying-Chien Tsai , Wood-Hi Cheng, “High yield coaxial-type laser module packages using on-line monitoring system,” Optics Communications, Vol. 281, 725–731, (2008) (SCI, EI)

67.           Hsu, Y. C., Tsai, Y.C., Kuang, J. H., Hung, Y. S., and Cheng, W. H, “A Quantitative Postweld Shift Measurement and Compensation Techniquein Butterfly Laser Module Packages,” Japanese Journal of Applied Physics，Vol.47, No. 9, pp. 7166-7172。(Nov., 2008)（SCI，EI）

68.           Ah-Der Lin and Jao-Hwa Kuang, “Dynamic Interaction between Contact Loads and Tooth Wear of Engaged Plastic Gear Pairs," International Journal of Mechanical Sciences, Vol. 50, Issue 2, pp. 205-213, (Feb. 2008) (SCI, EI)

69.           Yi-Cheng Hsu, Yu-Kuan Lin, Ming-Hung Chen, Chun-Chin Tsai, Jao-Hwa Kuang, Sheng-Bang Huang, Hung-Lieh Hu, Yeh-I Su, and Wood-Hi Cheng, " Failure Mechanisms Associated with Lens Shape of High-Power LED Modules in Aging Test," IEEE Transactions on Electron Device, Vol. 55, No. 2, pp. 689-693, (Feb. 2008) (SCI, EI)

70.           Bo- Wun Huang, Huang-Kuang Kung and Jao-Hwa Kuang, “Modal Localization in Mistuned Tube-Array Structures,” International Journal of Solids and Structures, Vol. 45/11-12, pp. 3192-3202, (2008) (SCI, EI)

71.           Bo Wun Huang, Ah Der Lin, Yung Chuan Chen, and Jao Hwa Kuang,” A Dynamic Model for a Drill in the Drilling Process,” International Journal of Mechanical, Industrial and Aerospace Engineering, Vol. 2, No. 4, pp.234-240, (2008) (SCI, EI)

72.           Bo- Wun Huang, Jao-Hwa Kuang and Pu-Ping Yu, “Effect of Crack on Drilling Vibration,” Journal of Sound and Vibration , Vol. 322, pp. 1100-1116, (Jan., 2009) (SCI, EI)

73.           Chun-Chin Tsai, Ming-Hung Chen, Yuan-Tsun Lo, Ying-Jyun Lin, Yi-Cheng Hsu, Jao-Hwa Kuang, and Wood-Hi Cheng , “Decay Mechanisms of Radiation Pattern and Optical Spectrum of High-Power LED Modules in Aging Test”, IEEE Tran. J., Journal of Selected Topics in Quantum Electronics, Vol. 15, No. 4, pp. 1156-1162,(July/August, 2009) (SCI, EI)

74.           Jao-Hwa Kuang, Chao-Ming Hsu, Chin-Che Hu, “Dynamic behavior of globoidal cam systems with torque compensation mechanisms,” Mechanism and Machine Theory, Vol. 45, pp.1201-1214, (August, 2010) (SCI, EI)

75.           Jao-Hwa Kuang , Pao-Chuan Che and Yung-Chuan Chen, “Plastic Optical Fiber Displacement Sensor Based on Dual Cycling Bending,” Sensors 2010, Vol. 10, pp. 10198-10210, (August, 2010) (SCI, EI)

76.           Hwang, G. S., Lin, C. C., Tsay, D. M., Kuang, J. H., and Chern, T. L., “An Innovative Transmission Mechanism Applicable to Variable Speed Wind Turbines,” Renewable Energies and Power Quality Journal (RE&PQJ), ISSN: 2172-038X, 8, paper No. 384, (2010) (EI)

77.           Guan-Shyong Hwang, Der-Min Tsay, Wei-Hsiang Liao,Jao-Hwa Kuang, and Tzuen-Lih Chern, “Kinematic Analyses of a Parallel-type Independently Controllable Transmission,” International Journal of Automation and Smart Technology, AUSMT, Vol. 1 No.1 pp. 87-92, (2011) (SCI, EI)

78.           Bo-Wun Huang, Pu-Ping Yu, Jeng-Nan Lee, and Jao-Hwa Kuang, “Natural Properties of a Micro Mill with Moving Boundary Conditions,” Advanced Science Letters, Vol. 4, No. 4/5,1673-1677, 2011(SCI, EI)

79.           Hui-Lung Chien, Bo Wun Huang, Jao-Hwa Kuang,” The Ogden Model for Coronary Artery Mechanical Behaviors,” Life Science Journal, Vol. 8, No.4, pp 430-437, (Nov., 2011), (SCI, EI)

80.           Jao-Hwa Kuang, Chao-Ming Hsu,  Ah-Der Lin, and  Jyun-Wei Luo,"The Effect of Residual Stress on Coupling Power Loss of VCSEL Modulus, " American Journal of Engineering and Technology Research, Vol. 11, No. 12, pp.618-621, (December, 2011) (EI)

81.           Jao-Hwa Kuang and Hui-Lung Chien, “The Effect of Film Thickness on Mechanical Properties of TiN Thin Films,” Advanced Science Letters, Vol. 4, 1–6, 2011(SCI,EI)

82.           Jao-Hwa Kuang, Tsung-Pin Hung, Shian-Huan Chiou,Chao-Ming Hsu,” Enhancement of Coupling Efficiency of Butterfly Package Laser Modules Based on Post-Weld-Shift Compensation,” Applied Mechanics and Materials, Vol. 145, , pp 109-113, (2012), (EI)

83.           Jao-Hwa Kuang, Tsung-Pin Hung, Chih-Kuan Chen,” A Keyhole Volumetric Model for Weld Pool Analysis in Nd:YAG Pulsed Laser Welding,” Optics and Laser Technology, Vol. 44, Issue 5, pp. 1521-1528, (July 2012). (SCI, EI)

84.           Hui-Lung Chien, Pei-Ju Chiu, Bo-Wun Huang, Jao-Hwa Kuang,” Young’s Moduli of Human Tooth Measured by Using Micro-indentation,” Life Science Journal, Vol. 9, No. 2, pp. 172-177,(2012) (SCI, EI)

85.           Jao-Hwa Kuang, Tsung-Pin Hung, Kuen La, Chao-Ming Hsu, Ah-Der Lin,” The Surface Absorption Coefficient of S304L Stainless Steel by Nd:YAG Micro-Pulse Laser,” Advanced Material Research , Vol. 472-475, pp 2531-2534,(2012) (EI )

86.           T.-L. Chern, L.-H. Liu,  P.-l. Pan, T.-M. Huang, D.-M. Tsay, J.-H. Kuang, L.-J. Chen, “Digital Signal Processing-based Sensor-less Permanent Magnet Synchronous Motor Driver with Quasi-sine Pulse-width Modulation for Air-conditioner Rotary Compressor,” IET Electric Power Applications, Vol. 6, Iss. 6, pp. 302–309, (2012)(SCI, EI)

87.           Ah-Der Lin, Chao-Ming Hsu, C.K. Chen, Da-Yun Huang, Tsung-pin Hung, Jao-Hwa Kuang, "Stainless Steel Surface Etching Morphologies Using Electro Plasma Technology," Advanced Science Letters (SCI), Vol. 13, PP 178-182(June, 2012) (EI )

88.           Chao-Ming Hsu, Tsung-Pin Hung, Ah-Der Lin and Jao-Hwa Kuang, "An Investigation on the Shear Toughness for Sn/3.0Ag/0.5Cu and Sn/37Pb Solder Ball Joints," Advanced Material Research , Vol. 476-478, pp 2455-2458,(2012) (EI )

89.           Jao-Hwa Kuang, Pao-Chuan Chen, and Yung-Chuan Chen, “Optical performance of symmetrical and asymmetrical Y-branch couplers for plastic optical fibers,” Applied Optics, Vol. 51, No. 19, pp. 4448-4456, 1 July 2012 (SCI, EI)

90.           B. W. Huang, a, Z. H. Weng, and J. H. Kuang, " Residual Vibration of a Tapered Hollow Metal Beam," Advanced Material Research , Vol. 538-541, pp 2508-2511,(2012) (EI )

91.           Guan-Shyong Hwang, Der-Min Tsay, Jao-Hwa Kuang, and Tzuen-Lih Chern, " Kinematic and Dynamic Analyses of a Series-Type Independently Controllable Transmission Mechanism," Advanced Material Research , Vol. 579, pp 483-493,(2012) (EI )

92.           Shih-Chieh Sun, Chi-Wei Chung, Chao-Ming Hsu and Jao-Hwa Kuang, “The Squeeze Film Effect on Micro-electromechanical Resonators,” J. of Vibroengineerin,.  Volume 14, Issue 4. ISSN 1392-8716, pp. 1486-1492 (Dec., 2012) (SCI, EI )

93.           Jao-Hwa Kuang, Tsung-Pin Hung, Shian-Huan Chiou,and Chao-Ming Hsu, " Enhancement of coupling efficiency of butterfly package laser modules based on Post-Weld-Shift compensation," Applied Mechanics and Materials , Vol. 145, pp 109-113,(2012) (EI )

94.           Shih-Chieh Sun, Chao-Ming Hsu, Jau-Wen Lin and Jao-Hwa Kuang, " The Local Defect Effect on Molecular Local Density State in Carbon Diamond Structures," Applied Mechanics and Materials , Vol. 275-277, pp 1810-1813,(2013) (EI )

95.           Bo-Wun Huang, Jung-Ge Tseng  and Jao-Hwa Kuang, " Vibration of a Tube with the Axial Loads and Fluid," Applied Mechanics and Materials , Vol. 275-277, pp 9125-929, (2013)  (EI )

96.           T.P. Hung, C.M. Hsu, A.D. Lin and J.H. Kuang, " Residual Stress and Bead Profile Analysis of Pulsed Nd:YAG Laser Lap Welding," Applied Mechanics and Materials , Vol. 284-287, pp 915-918,(2013) (EI )

97.           S.C. Sun, C.W. Chung, C.M. Hsu and J.H. Kuang, " The Squeeze Film Damping Effect on Dynamic Responses of Micro-Electromechanical Resonators," Applied Mechanics and Materials , Vol. 284-287, pp 1961-1965,(2013) (EI )

98.           S. C Sun, C. Y. Huang, Chao Ming Hsu, and Jao Hwa Kuang, “The Effect of Nano-Scale Local Defects on Mechanical Properties of Silicon and Diamond Films,” Journal of Integrated Ferroelectric, Vol. 143, Issue 1, pp 1-9,(May, 2013) (SCI, EI )

99.           Chao-Ming Hsu, Ah-Der Lin, Hui-Lung Chien,Tsung-Pin Hung, and Jao-Hwa Kuang, “Using Nano Indentation Techniques to Investigate theYoung’s Moduli for Human Teeth of Different Ages,” Journal of Bionanoscience, Vol. 7, No. 2, pp 154-158, (April, 2013) (SCI, EI)

100.        Jung-Ge Tseng, Bo Wun Haung, Lian Sen Mao, and Jao Hwa Kuang , " Buckling Characteristics of Microdrills by Using Finite Element Method," Advanced Material Research , Vol. 785-786, pp 1143-1146,(2013) (EI )

101.        B. W. Haung, J.-G. Tseng, M. Z. Wong, P. J. Chiu, and J. H. Kuang*,” Using Nano Indentation Techniques to Investigate theYoung’s Moduli for Human Teeth of Different Ages,” Life Science Journal, Vol. 10, No. 2, pp. 276-282,(2013) (SCI, EI)

102.        Chao-Ming Hsu, Ah-Der Lin and Jao-Hwa Kuang, “Sn/3.0Ag/0.5Cu Tin Ball Tensile Creep Tests,” Innovation, Communication and Engineering, Taylor & Francis Group, London, ISBN 978-1-138-00117-6, pages 83-86, (2014) (EI)

103.        Jao-Hwa Kuang, Chun-Ho Yin, Kuang-Yao Chang and Pao-Chun Chen, “The Effect of Tip-lens on Coupling Efficiency of Plastic Optical Fiber Coupler,” Innovation, Communication and Engineering, Taylor & Francis Group, London, ISBN 978-1-138-00117-6, pages 117-120, (2014) (EI)

104.        Chao-Ming Hsu, Ah-Der Lin and Jao-Hwa Kuang, “The Creep Parameters of SAC305 Unleaded Solders,” Advances in Materials Science and Engineering, Hindawi Publishing Corporation, Vol. 2013, Article ID 838075, 10 pages, doi:10.1155/2013/838075. (2014) (SCI, EI)

105.        Ah-Der Lin, Jao-Hwa Kuang, Chao-Ming Hsu, " The Temperature Rising Effects on the Dynamic Stress Variation for a Mating Plastic Spur Gear Pair," Journal of the Chinese Society of Mechanical Engineering, Vol. 35, No. 1, pp. 83-91 (2014) (EI)

106.        Jao-Hwa Kuang, Chao-Ming Hsu and AhDer Lin, "A Study on the Conductivity Variation of Au-Coated Conductive Particles in ACF Packaging Process," Journal of Nanomaterials, Hindawi Publishing Corporation,Volume 2015, Article ID 485276, 8 pages, http://dx.doi.org/10.1155/2015/485276 (SCI, EI)

107.        B.-W. Huang, Jao-Hwa Kuang, Jung-Ge Tseng, Jyun-Cin Wang and Yu-Xian Qiu, "Seismic Analysis of a Viscoelastic Damping Isolator," Advances in Materials Science and Engineering, Hindawi Publishing Corporation, Volume 2015 (2015), Article ID 280625, 6 pages, http://dx.doi.org/10.1155/2015/280625 (SCI, EI)

108.        Jao-Hwa Kuang, Chao-Ming Hsu & Ah-Der Lin, “Determination of piezoelectric parameters from the measured natural frequencies of apiezoelectric circular plate,” Journal of Integrated Ferroelectric, Taylor & Francis, Vol. 168, Issue 1, pp 36-52,(April 20, 2016) (SCI, EI )

109.        Jao-Hwa Kuang, Chao-Ming Hsu & Ah-Der Lin, “The Coffin-Manson formula for unleaded Sn/3.0Ag/0.5Cu solder,” Journal of Integrated Ferroelectric, Taylor & Francis, Vol. 172, Issue 1, pp200-214,(June 01, 2016) (SCI, EI )

瀏覽數: