1.Chien, C.H., Turner, J. I., Swinson, W. F. and Ranson, W. F., 1982, 'Extending the Laser-specklegram Technique to Strain Analysis of Rotating Components', Experimental Mechanics, Vol. 22, No. 11, pp. 434-440 (SCI/EI).

2. Chien, C.H. and Costello, G. A., 1985, 'Effective Length of a Fractured Wire in Wire Rope', Journal of Engineering Mechanics, ASCE, Vol. III, No. 7, pp. 952-961 (SCI/EI).

3. Chien, C.H. and Chen, H. J., 1987, 'On the Strength of Ship Hull During Pre-and Post-Afloating in Dry Dock', Journal of The Society of Naval Architects and Marine Engineers, R.O.C., Vol. 6, No. 1, pp. 263-268.

4. Chien, C.H., LeClair, R. A. and Costello, G. A., Vol. 16, No. 2, 1988, 'Strength and Fatigue Life of Wire Rope', Mechanics Based Design of Structures and Machines, Vol. 16, No. 2, pp. 213-223 (SCI/EI).

5. Chien, C.H., Chen, H. J., and Chiou, Y. T., 1989, 'The Estimation of Welding Residual Stresses by Using Simulated Inherent Strains', Transactions of The Japan Welding Society, Vol. 20, No. 1, pp. 52-59(SCI/EI).

6. .Chien, C.H., Chen, H. J. and Chiou, Y. T, 1990, 'Numerical Evaluation of Stress Intensity Factors at Crack Tips in Weldments', Transactions of The Japan Welding Society, Vol. 21, No. 1, pp.31-40 (SCI/EI).

7. Chien, C.H. and Chen, H. J., 1990, 'The Estimation of Welding Residual Deformations in Thin Plate Weldments by The Numerical Method', Journal of The Society of Naval Architects and Marine Engineers, R.O.C., Vol. 9, No. 1, pp.1-19..

8. Chien, C.H., Chiou, Y. T. and Lin, L. H., 1996, 'The Application of Two-Refractive-Index Contouring on the Contour Difference of Two Compared Specimens', Journal of Nondestructive Evaluation, Vol. 15, No. 1, pp. 1-10 (SCI/EI).

9. Chien, C.H. and Chiou, Y. T., 1997, 'Extending the Laser-Specklegram Technique to Residual Displacement Analysis of Weldments', Journal of The Society of Naval Architects and Marine Engineers, R.O.C., Vol. 16, No. 2, pp. 13-22.

10. Chien, C.H. and Chiou, Y. T., 1997 'The Study of Residual Stress Effect on the Mode I Stress Intensity Factor in Al. 6061-T6 Aluminum Plate by the Reflected Shadow Method', Journal of CSME, Vol. 18, No.3, pp. 215-224.(NSC82-0401-E-110-116) (SCI/EI).

11. Chien, C.H., Chiou, Y.T., Lee, C. C., Liou, Y. W., and Chen, S. T., 1998, “The Quantitative Analysis of A Two-medium Mixture Using Holographic Interferometry : The Determination of The Size Corresponding to Circular-and Rectangular-column Voids in A Two-medium Mixture,” Optics and Lasers in Engineering, Vol. 30, No.6, pp513-526. (NSC86-2221-E-110-013)(SCI/EI).

12. 邱以泰、錢志回、吳以德、陳聖偉，2002，”SOC構裝經溫度循環可靠度測試之應力分析”，工業材料第187期，pp.156-172.

13. Chien,C.H., Chen,Y.C., Chiou,Y.T., Chen,T.P., Hsieh,C.C., Yan,J.J., Chen,W.Z., and Wu,Y.D., 2003, “Influences of the Moisture Absorption on PBGA Package’s Warpage During IR Reflow Process,” Microelectronics Reliability, Vol. 43, No. 1, pp.131-139（NSC89-2212-E110-043）(SCI/EI).

14. Chien,C.H., Chen,Y.C., Hsieh,C.C., Wu,Y.D., and Chiou,Y.T.,2004 “Thermo-mechanical Behaviors of the Underfill/Solder Mask/Substrate Interface under Thermal Cycling,”Experimental Mechanics, Volume 44, No. 2, pp.214-220 （NSC90-2212-E-110-026）(SCI/EI).

15. Pan,C.T., Chien,C.H., and Hsieh,C.C.,2004, “Technique of Microball Lens Formation for Efficient Optical Coupling,”Applied Optics, Volume 43, Issue 32, pp. 5939-5946 (SCI/EI).

16. Pan,C.T., Shen,S.C., Hsieh,C.C., Chien,C.H., and Chen,Y.C.,2004, “Numerical Method to Predict and Fabricate Aspherical Micro-lens Array Using 248nm Excimer Laser Ablation,”Journal of Microlithography, Microfabrication, and Microsystems, Volume 3, Issue 4, pp. 555-562 (EI).

17. Chien, C.H., Pan, C.T., Hsieh,C. C., Yang,C. M., Sher, K. L., 2005”Study on The Geometry of Microball Lens Array by Novel Batch-fabrication Technique,” Sensors and Actuators A ,Vol A122, pp. 55-63 (SCI/EI).

18. Chien, C.H., Chen,T.P., and Chao,Y.J.,2005, “Thermal Modeling and Optimal Tool Moving Velocity for Friction Stir Welding,” Journal of Chinese Society of Mechanical Engineers, Vol. 26, No. 2, pp. 193-198 (SCI/EI).

19. Chien,C.H., Wu,Y.D., Chiou,Y.T., Hsieh,C.C., Chen,Y.C., Chen,T.P., Tsai,M.L., and Wang,C.T., 2006 “Nanoscale Deformation Measurement using the Gray-level Method by Holographic Interferometry”, Optics and Lasers in Engineering , Vol. 44, No. 1, pp. 81-90. (NSC91-2218-E-110-008, NSC 92-2212-E-110-017, and NSC 93-2218-E-110-008) (SCI/EI).

20. Chien,C.H., Chen,T.P., Chen,Y.C., Chiou,Y.T., Hsieh,C.C., and Wu,Y.D.,2006, " Stability of the Warpage in A PBGA Package Subjected to Hygro-thermal Loading,” Microelectronics Reliability , Vol. 46, Iss. 7, pp. 1139-1147 (SCI/EI).

21. Chien,C.H., Chen,T.P., Lin,W.B., and Chao,Y.J., 2006, “Investigation of the FSW Process Parameters in the Optimal Quality of Aluminum Alloys AA1050 by the Fuzzy Logic in Taguchi Technique”, Journal of the Chinese Society of Mechanical Engineers, Vol. 27, No. 6, pp. 663-670 (SCI/EI).

22. Li,X., An,Y.H., Wu,Y.D., Song,Y.C., Chao,Y.J., and Chien,C.H., 2007, "Microindentation Test for Assessing the Mechanical Properties of Cartilagineous Tissues," Journal of Biomedical Materials Research: Part B - Applied Biomaterials, Vol. 80B, Iss.1, pp. 25-31 (SCI/EI).

23. Chien,C.H., Jian,S.R., Wang,C.T., Juang,J.Y., Huang,J.C., and Lai, Y.S., 2007, “Cross-sectional Transmission Electron Microscopy Observations on The Berkovich Indentation-induced Deformation Microstructures in GaN Thin Films”, Journal of Physics D: Applied Physics, Vol. 40, Iss. 13, pp. 3985-3990 (SCI/EI).

24. Chien,C.H., Wu,Y.D., Chen,Y.C., Hsieh,C.C., Chen,T.P., Chiou,Y.T., Tsai, M.L., Wang,C.T., Lin, S. L. and Chen, W. F.,2007,” Quantitative Detection of the Inside Defect in Automotive Tire by an Interferographic Technique”, Research in Nondestructive Evaluation, Vol.18, Iss. 3, pp. 163-177 (SCI/EI).

25. Wu,Y.D., Chien,C.H., Chao,Y.J., Yu, J.C., and Williamson, M., 2007, “Fourier Analysis of Human Sagittal Sutures”, Cleft Palate-Craniofacial Journal , Vol 44, No.5, pp. 482-493 (SCI).

26. Ju,S.P., Wang,C.T., Chien,C.H., Huang,J.C., and Jian,S.R., 2007,“The Nanoindentation Responses of Nickel Surfaces with Different Crystal Orientations”, Molecular Simulation, Vol. 33, No. 11, pp. 905-917 (SCI/EI).

27. Chien, C.H., Shih, Y.S., Hsieh, S.S., Tsai, H.H., Huang, Y.L.,and Lin, C.W., 2007, “TheEffects of Variations of Flow Field and Geometry of Micro-Channel on the Cracked Ag-SU8 Interface in a Micro-PEMFC ”, Journal of the Chinese Society of Mechanical Engineers, Vol. 28, No. 4, pp. 357-365(NSC 93-2218-E-110-008 and NSC 94-2218-E-110-006) .(SCI/EI)

28. Chien,C.H., Chen,T.P., Lin,W.B., Hsieh,C.C., Wu,Y.D., and Yeh,C.H., 2008,"Experimental and Statistical Study in Adhesion Features of Bonded Interfaces of IC Packages,”Microelectronics Reliability Vol. 48, Iss.1, pp. 140-148 (SCI/EI).

29. Chien,C.H., Wu,Y.D., Chao,Y.J., Chen,T., Chen,W.F., Yu,J.C., and Li,X., 2008, “The Effects of Different Cranial Modules on Mechanical Properties of Cranial Suture in Lewis Rats and Same-aged C57BL/6 Mice”, STRAIN, Vol. 44, Iss. 3, pp.272-277(NSC 94-2917-I-110-002)(SCI/EI).

30. Chien, C.H., and Chen, C. H., 2008, “Applying Statistic Methodology to Monitor the Piping Conditions in Petroleum Process”, Journal of Loss Prevention in the Process Industries, Vol 21, No 4, pp.450-460 (SCI/EI).

31. Chao, Y.J., Liu, S. and Chien, C.H., 2008, “Friction Stir Welding of Al 6061-T6 Thick Plates: Part I – Experimental Analyses of Thermal and Mechanical Phenomena, ” Journal of the Chinese Institute of Engineers, Vol 31, No 5, pp.757-767 (SCI/EI).

32. Chao, Y.J., Liu, S. and Chien, C.H., 2008, “Friction Stir Welding of Al 6061-T6 Thick Plates: Part II – Numerical Modeling of the Thermal and Heat Transfer Phenomena, ” Journal of the Chinese Institute of Engineers, Vol 31, No 5, pp.769-779 (SCI/EI).

33. Wu, Y.D., Chien, C.H., Chao,Y.J., Hamrick, M.W., Hill, W.D., Yu, J.C. and Li, X.,2008, “Granulocyte Colony Stimulating Factor (G-CSF) Administration Alters Femoral Biomechanical Properties in C57BL/6 Mice”, Journal of Biomedical Materials Research: Part A, Vol. 87A, No. 4, pp.972-979 (SCI/EI) .

34. Chien, C.H., Chen, C. H., and Chao, Y.J., 2009 “A Strategy for the Risk-based Inspection of Pressure Safety Valves”, Reliability Engineering & System Safety, Vol.94, Issue 4, pp.810-818 (SCI/EI).

35. Chao, Y.J., Wang, C., Kim, Y., and Chien, C.H., 2010 “Relationship Between Crack-Tip Constraint and Dynamic Fracture Initiation Toughness,” ASME J of Pressure Vessel Technology, Vol. 132, No. 2, pp. 021404-1-021404-9 (SCI/EI).

36. Chu, L.M., Lai, J.Y., Chien, C.H., and Li, W.L., 2010 “Effects of Surface Forces on Pure SqueezeThin Film EHL Motion of Circular Contacts”, Tribology International, Vol. 43, Issue 3, pp. 523-531 (SCI/EI) (NSC-98-2221-E-214-022, NSC-97-2221-E-006-223-).

37. Chu, L.M., Lai, J.Y., Chien, C.H., and Lin, J.R., 2010 “Effects of Temperature on Pure Squeeze EHL Motion Using Grayscale Interferometric Method”, Industrial Lubrication and Tribology, Vol. 62, Issue 3, pp. 174-181 (SCI/EI) (NSC-98-2221-E-214-022).

38. Chu, L.M., Lai, J.Y., Li, W.L., and Chien, C.H., 2010 “Particle-Particle Interactions in a Viscous Liquid- an Equivalent Elastohydrodynamic Lubrication (EHL) Model”, Journal of Micro Nanolithography, MEMS, and MOEMS, Vol. 9, No. 3, pp. 031008-1-031008-9 (SCI/EI) (NSC 97-2221-E-006 -223, NSC-98-2221-E- 214-022).

39. Chien, C.H., Lin, W. B., and Chen, T.P.,”Optimal FSW Process Parameters for Aluminum Alloys AA5083,” Journal of the Chinese Institute of Engineers, Vol. 34, Iss.1, pp. 99-105 (SCI/EI) (NSC 95-2221-E-268-004).

40. Tong. C., Lin, C.W., Chien, C.H., Chao, Y.J., and Van Zee, J.W., 2011, “Service Life Estimation of Liquid Silicone Rubber Seals in PEM Fuel Cell”, Journal of Power Sources, Vol. 216, Iss.3, pp. 1216-1221 (SCI/EI) (NSC .97-2917-I-110-108).

41. Lin, C.W., Chien, C.H., Tang, J., Tong. C., Chao, Y.J., and Van Zee, J.W., 2011, “Chemical Degradation of Five Elastomeric Seal Materials in a Simulated and an Accelerated PEM Fuel Cell Environment”, Journal of Power Sources, Vol. 216, Iss.4, pp. 1955-1966 (SCI/EI)(NSC 97-2917-I-110-108).

42. Chien, C. H.*, Tsai, M. L., Hsieh, C. C., and Li, Y. H., 2011, “Al@SiO2 Core-Shell Micro flakes as Metal-Based Light Scattering Layer in Dye-Sensitized Solar Cells”, International Journal of Photoenergy., Vol.2011, Article ID 371076, 5pages (SCI/EI)(NSC 99-2221-E-110-020).

43. Chien, C. H*., Tsai, M. L., Hsieh, C. C. and Li, Y. H, 2011, “Enhanced Light Harvesting in Dye-Sensitized Solar Cell Using External Lightguide”, International Journal of Photoenergy. Vol. 2011, Article ID 261828, 6pages (SCI/EI)(NSC 99-2221-E-110-020).

44. Lin, C.W., Chien, C.H., Tang, J., Chao, Y.J., and Van Zee, J.W., 2011, “Dynamic Mechanical Characteristics of Five Elastomeric Gasket Materials Aged in a Simulated and an Accelerated PEM Fuel Cell Environment”, International Journal of Hydrogen Energy, Vol. 36, Iss. 11, pp. 6756-6767(SCI/EI).

45. Chien, C. H*., Chen, B. S. and Wu, Y. D, 2014, “Thermal Effects Analysis of Flip Chip LED Packages with through Silicon Via (TSV) by Using Numerical Simulation”, Applied Mechanics and Materials, Vol. 459, pp. 289-294 (EI).

46. Chien, C. H*., Tsai, M. L., Hsieh, C. C., Li, Y. H. and Chao, Y. J., 2014, “A Light Harvesting Policy on Black Counter Electrode for Enhanced Performance of

Dye-Sensitized Solar Cells”, Journal of Solar Energy Engineering, Vol. 136, No.1,

pp.011020-1~011020-5 (SCI/EI)(NSC 99-2221-E-110-020).

47. Chen, T*., Chien, C. H., Tsay, T. L., Tzeng, Y. M., and Cheng, H. H, 2014, “To Measure Mechanical Properties along Thickness in FSW Welded Zone by Applied ESPI technology”, Key Engineering Materials, Vol. 626, pp. 1-9 (EI).

48. Chien, C. H*., Chen, L. C., Chen, B. S., Li, S. J., and Che, J. W, 2015, “Effect of Bolts Assembly on the Deformation and Pressure Distribution of Flow-Channel Plates in Micro-PEMFC”, Fuel Cells, Vol. 15, Iss. 2, pp. 322-326 ( SCI/EI).

49. Chien, C. H., Chen,C. C., Chen,T., Lin, Y. M., and Liu, Y. C, 2016, “Thermal Deformation of Microstructure Diffuser Plate in LED Back-Light Unit”, Journal of the Society for Information Display, Vol. 24, Iss. 2, pp. 99-109 (SCI/EI).

50. Chien, C. H., Su, F. I., Lin, C. Y., Su, T. H., Lin, Y. M., Chen, T*. and Liu, Y. C., 2016, “Thickness Effects on the Thermal Expansion Coefficient of Indium Tin Oxide/Polyethylene Terephthalate Film”, Experimental Techniques, Vol. 40, Iss. 2, pp. 639-644 (SCI/EI).

51. Chien, C. H., Wang, C. T*., Tsai, C. H., Yang, P. F., Li, Y. X., and Chen, B. S., 2016, “Temperature Effect on Kinetic Friction Characteristics of Cu Substrate Composed by Single Crystal and Polycrystalline”, Computational Materials Science, Vol. 117, pp. 412-421 (SCI/EI).

52. Chien, C. H. and Su, T. H.*, 2016, “Using Digital Image Correlation Method for Measuring Residual Stress in the Nickel Coating of the Specimen”, Experimental Techniques, Vol. 40, Iss. 4, pp. 1341-1348 (SCI/EI)(MOST 104-2221-E-110-019).

53. Chien, C. H., Hu, Y. L., Su, T. H.*, Liu, H. T., Wang, C. T., Yang, P. F., and Lu, Y. X., 2016, “Effects of Bolt pre-loading Variations on Performance of GDL in a Bolted PEMFC by 3-D FEM Analysis”, Energy, Vol. 113, pp. 1174-1187 (SCI/EI)(MOST 103-2221-E-110-072).