期刊論文

1.          C.C. Cheng* and C.Y. Chen, 1996. “Controller Design for an Overhead Crane System with Uncertainty,” Control Engineering Practice, Vol. 4, No. 5, pp. 645-653. (SCIE)

2.          C.C. Cheng* and C.Y. Chen, 1998. “A PID Approach to Suppressing Stick-Slip in the Positioning of Transmission Mechanisms,” Control Engineering Practice, Vol. 6, No. 4, pp. 471-479. (SCIE)

3.          Y.L. Hsu*, C.C. Cheng, and S.L. Wen, 1999. “Analysis and Prediction of Looper Response in the Hot Strip Finishing Mill,” China Steel Technical Report (中鋼技報), No. 13, pp. 75-82.

4.          C.Y. Chen*, C.C. Cheng, and G.T.-C. Chiu, 2000. “Adaptive Robust Control of Media Advance Systems for Thermal Inkjet Printers,” Mechatronics, Vol. 10, No. 1-2, pp. 111-126. (SCI)

5.          C.Y. Chen*, G.T.-C. Chiu, C.C. Cheng, and H. Peng, 2000. “Passive Voice Feedback Control of Closed-Box Subwoofer Systems,” Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, Vol. 214, No. 7, pp. 995-1005. (SCI)

6.          C.C. Cheng* and W.H. Hsieh, 2001 “The Fuzzy Crystallization Algorithm: A New Approach to Complex Systems Modeling,” IEEE Transactions on Systems, Man and Cybernetics – Part B: Cybernetics, Vol. 31, No. 6, pp. 891-901. (SCI)

7.          C.C. Cheng* and G.S. Chen, 2002. “A Multiple RCC Device for Polygonal Peg Insertion,” JSME International Journal Series C – Mechanical Systems, Machine Elements and Manufacturing, Vol. 45, No. 1, pp. 306-315. (SCI)

8.          C.C. Cheng*, C.Y. Chen, and G.T.-C. Chiu, 2002. “Predictive Control with Enhanced Robustness for Precision Positioning in Frictional Environment,” IEEE/ASME Transactions on Mechatronics, Vol. 7, No. 3, pp. 385-392. (SCI)

9.          C.C. Cheng* and G.S. Chen, 2003. “Analysis of Flexible Insertion Assembly of Polygonal Pegs,” JSME International Journal Series C – Mechanical Systems, Machine Elements and Manufacturing, Vol. 46, No. 3, pp. 1130-1141. (SCI)

10.      S.H. Fu* and C.C. Cheng, 2004. “Direct Adaptive Feedback Design for Linear Discrete-Time Uncertain Systems,” Asian Journal of Control, Vol. 6, No. 3, pp. 421-427. (SCIE)

11.      C.C. Cheng* and J.S. Tsai, 2004. “Global Cutting for the Maximum Rectangular Block from Arbitrary Closed Region,” International Journal of Machine Tools and Manufacture, Vol. 44, No. 14, pp. 1423-1430. (SCI)

12.      C.C. Cheng*, L.Y. Hsu, Y.L. Hsu, and Z.S. Chen, 2006. “Precise Looper Simulation for Hot Strip Mills Using Auto-Tuning Approach,” International Journal of Advanced Manufacturing Technology, Vol. 27, No. 5-6, pp. 481-487. (SCIE)

13.      J.S. Tsai* and C.C. Cheng, 2006. “Optimization for the Maximum Rectangular Block from an Arbitrary Closed Region Using GA,” Progress on Advanced Manufacture for Micro/Nano Technology 2005, Materials Science Forum, Vols. 505-507, pp. 517-522. (SCI)

14.      C.Y. Chen* and C.C. Cheng, 2006. “3D Model Based Design for Control of a Mechatronic Machine Tools System,” Progress on Advanced Manufacture for Micro/Nano Technology 2005, Materials Science Forum, Vols. 505-507, pp. 967-972. (SCI)

15.      C.C. Cheng* and H.T. Li, 2006. “Feature-Based Optical Flow Computation,” International Journal of Information Technology, Vol. 12, No. 7, pp. 82-90.

16.      C.C. Cheng* and G.L. Lin, 2007. “Motion Estimation Using the Single-row Superposition-type Planar Compound-like Eye,” Sensors, Vol. 7, No. 7, pp. 1047-1068. (SCIE)

17.      C.Y. Chen*, P.S. Liao, C.C. Cheng, and G.F. Jong, 2007. “Design and Implementation of Integrated Non-uniform Rational B-Spline and Digital Differential Analyser Interpolators for Computerized Numerical Control Servocontrollers,” Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, Vol. 221, No. 9, pp. 1075-1087. (SCI)

18.      C.Y. Chen*, Y.C. Shun, C.C. Cheng, P.S. Liao, and Z.C. Fang, 2007. “MATLAB-based Rapid Controller Development Platform for Control Applications,” Proceedings of the Institution of Mechanical Engineers Part C - Journal of Mechanical Engineering Science, Vol. 221, No. 11, pp. 1461-1473. (SCI)

19.      C.C. Cheng* and G.L. Lin, 2008 “Acquisition of Translational Motion by the Parallel Trinocular,” Information Sciences, Vol. 178, No. 1, pp. 137-151. (SCI)

20.      C.Y. Chen* and C.C. Cheng, 2008. “Robust Integrated Design for a Mechatronic Feed Drive System of Machine Tools,” International Journal of Mechanical Systems Science and Engineering, Vol. 2, No. 1, pp. 55-65.

21.      S.H. Fu* and C.C. Cheng, 2008. “On Direct Adaptive Control Design for Nonlinear Discrete-time Uncertain Systems,” Journal of the Franklin Institute, Vol. 345, No. 2, pp. 119-135. (SCIE)

22.      C.C. Cheng*, L.Y. Hsu, G.L. Lin and C.H. Chiang, 2008. “Servo Tracking of Three-Dimensional Motion by the Parallel Trinocular,” WSEAS Transactions on Systems and Control, Vol. 3, No. 3, pp. 172-183. (EI)

23.      G.L. Lin* and C.C. Cheng, 2008. “An Artificial Compound Eye Tracking Pan-Tilt Motion,” IAENG International Journal of Computer Science, Vol. 35, No. 2, pp. 242-248.

24.      C.Y. Chen*, L.Q. Liu, C.C. Cheng and G.T.-C. Chiu, 2008. “Fuzzy Controller Design for Synchronous Motion in a Dual-Cylinder Electro-Hydraulic System,” Control Engineering Practice, Vol. 16, No. 6, pp. 658-673. (SCIE)

25.      C.Y. Chen*, C.C. Cheng and P.S. Liao, 2008. “A Hybrid Control Strategy for Precise Positioning Mechanisms,” International Journal of Control Theory and Applications, Vol. 1, No. 1, pp. 1-11.

26.      C.C. Cheng and S.H. Fu*, 2009. “On Trajectory-Dependent Direct Adaptive Control for a Class of Uncertain Linear Discrete-Time Systems,” International Journal of Adaptive Control and Signal Processing, Vol. 23, No. 11, pp. 1014-1030. (SCIE)

27.      C.C. Cheng*, L.Y. Hsu, Y.L. Hsu, and P.T. Chen, 2011. “Simulation and Analysis of Feedforward Automatic Gauge Control for a Hot Strip Finishing Mill,” Frontiers of Manufacturing Science and Measuring Technology, Advanced Materials Research, Vols. 230-232, pp. 471-475. (EI)

28.      G.L. Lin* and C.C. Cheng, 2012. “Robust Translational Motion Parameters of Superposition-Type Planar Compound-Like Eye by the Parallel Binocular,” Advanced Science Letters, Vol. 9. No.1, pp. 695-699. (EI)

29.      Y.C. Yang* and C.C. Cheng, 2012. “Robust Adaptive Sliding Mode Trajectory Control for an Omnidirectional Mobile Platform,” ICIC Express Letters, Vol. 6, No. 6, pp. 1489-1494. (EI)

30.      Y.C. Yang*, C.C. Cheng, and C.Y. Chen, 2013. “Robust Adaptive Trajectory Control for an Omnidirectional Vehicle,” Applied Mechanics and Materials, Vols. 284-287, pp. 1919-1923. (EI)

31.      K.S. Yang* and C.C. Cheng, 2013. “Robust Adaptive Controller Design for a Quadrotor Helicopter,” Applied Mechanics and Materials, Vols. 284-287, pp. 2296-2300. (EI)

32.      Y.C. Yang* and C.C. Cheng, 2013. “Robust Adaptive Trajectory Control for an Omnidirectional Vehicle with Parametric Uncertainty,” Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, No. 3, pp. 405-413. (SCIE)

33.      C.C. Cheng*, K.S. Yang*, and J.H. Yang, 2013. “Robust Finite Time Controller Design for Second Order Nonlinear Underactuated Mechanical Systems,” Transactions of the Canadian Society for Mechanical Engineering, Vol. 37, No. 3, pp. 549-557. (SCIE)

34.      C.C. Cheng* and C.H. Tsai, 2016. “Visual Servo Control for Balancing a Ball-Plate System,” International Journal of Mechanical Engineering and Robotics Research, Vol. 5, No. 1, pp. 28-32.

35.      C.C. Cheng*, Y.T. Tseng, C.D. Wu, and D.L. Wang, 2016. “Fault Diagnosis of a High-Speed Cam-Driven Pin Assembly System,” Advances in Materials Science and Engineering, Vol. 2016, Article ID 5917408, pp. 1-14. (SCIE)