跳到主要內容區

Top

◎ 期刊論文(R.T. Lee)

arow.gif (1479 bytes)  期刊論文：

期刊論文(Refereed Journal Papers)

  1.   林陽泰，李榮宗， 1983 ， “ 曲柄滑塊機構動力彈性動態分析 ” ，中國機械工程學刊，第 4 券，第 2 期，第 53-65 頁。

  2. R.T. Lee and B.J. Hamrock, 1989, “Squeeze and Entraining Motion in Nonconformal Line Contacts, Part I – Hydrodynamic Lubrication”, Trans. ASME., Journal of Tribology, Vol. 111, no. 1, pp. 1-7.

  3. R.T. Lee and B.J. Hamrock, 1989, “Squeeze and Entraining Motion in Nonconformal Line Contacts, Part II – Elastohydrodynamic Lubrication”, Trans. ASME., Journal of Tribology, Vol. 111, no. 1, pp. 8-16.

  4. R.T. Lee and B.J. Hamrock, 1990, “A Circular Non-Newtonian Fluid Model, Part I – Elastohydrodynamic Lubrication”, Trans. ASME., Journal of Tribology, Vol. 112, no. 3, pp. 486-496.

  5. R.T. Lee and B.J. Hamrock, 1990, “A Circular Non-Newtonian Fluid Model, Part II – Microelastohydrodynamic Lubrication”, Trans. ASME., Journal of Tribology, Vol. 112, no. 3, pp. 497-505.

  6. C.H. Hsu and R.T. Lee , 1991, “A Circular Non-Newtonian Fluid Model Used in Elastohydrodynamic Squeeze Films”, Journal of CSME, Vol. 12, No. 4, pp. 401-411.

  7. 許昭和 , 李榮宗 , “ 有潤滑二正向接近物體的數值分析 ”, 技術學刊 , Vol. 6, No. 2, pp. 129-138.

  8. C.H. Chiou, R.T. Lee , Y.A. Chang and W.F. Guo, 1992, “Fundamental Characteristics of Wear Particle Deposition by Improved Ferrographic Analyzer”, Wear, Vol. 155, pp. 285-295.

  9. Y.C. Chiou, R.T. Lee , Y.A. Chang and W.F. Kuo, 1992, “Fundamental characteristics of wear prticle dposition by an improved ferrographic analysis”, Wear, Vol.155, pp.285-295, 80-0401-E-0110-006 （ SCI ）

  10. 許昭和 , 李榮宗 , 1992, “ 非牛頓流體模型應用於彈液動擠壓問題 ”, The Chinese Journal of Mechanics, Vol. 18, No. 4, pp. 353-364.

  11. R.T. Lee and C.H. Hsu, 1993, “A Fast Method for the Analysis of Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Line Contacts”, Wear, Vol. 166, pp. 107-117.

  12. R.T. Lee and C.H. Hsu, 1993, “Advanced Multilevel Solution for Thermal Elastohydrodynamic Lubrication of Simple Sliding Line Contacts”, Wear, Vol. 171, pp. 227-237.

  13. Y.C. Chiou, R.T. Lee , J.H. Chang, 1993, ”Relationship between the propagation of fatigue cracks and behaviour of plastic flow under rolling/sliding contacts-effect of load”, The Chinese Journal of Mechanics, Vol. 9, No. 1, pp. 17-25. NSC80-0401-E-0110-009 （ EI ）

  14. C.H. Hsu and R.T. Lee , 1994, “An Efficient Algorithm for Thermal Elastohydrodynamic Lubrication Under Rolling/Sliding Line Contacts”, ASME, Journal of Tribology, Vol. 116, pp. 762-769.

  15. C.H. Hsu and R.T. Lee , 1994, “Advanced Multilevel Solution for Elastohydrodynamic Lubrication Circular Contact Problem”, Wear, Vol. 177, pp. 117-127.

  16. W. F. Kuo, Y. C. Chiou and R. T. Lee , 1994, “The analysis of magnetic field and the behavior studies of wear debris deposition for the stationary ferrographic analyzer”, J. CSME, Vol.15, No.6, pp.563-571. NSC83-0401-E-0110-027 （ EI ）

  17. R.T. Lee and W. Y. Chiou, 1995, “Finite Element Analysis of Phase Change Problems Using Multilevel Techniques”, Numerical Heat Transfer, Part B, Vol. 27, pp. 277-290.

  18. R.T. Lee , C.H. Hsu and W. F. Kuo, 1995, “Multilevel Solution for Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Circular Contacts”, Tribology International, Vol. 28, No. 8, pp. 541-552.

  19. C.R. Yang, Y.C. Chiou, and R.T. Lee , 1995, “Study o­n positioning accuracy of reciprocating friction drive system ”, Wear, Vol. 189, pp. 58-65, NSC83-0401-E-110-160 （ SCI ）

  20. W.F. Kuo,Y.C. Chiou, and R.T. Lee ,1996,”A study o­n lubrication mechanism and wear scar in sliding circular contact”, Wear, Vol.201, pp.217-226, NSC-80-0401-E-011-002 （ SCI ）

  21. R.T. Lee , C.R. Yang, and Y.C. Chiou, 1996, A procedure for evaluating accuracy of reciprocating friction drive system. Tribology International, Vol.29, No.5, pp.395-404. NSC-83-040-E-110-106 （ SCI ）

  22. R.T. Lee , Y.C. Chiou, T.T. Lai and K. Ting, 1996,”A study of static and dynamic characteristic of hydrostatic journal bearing in reciprocation pump using multigrid technique”, Nuclear Science Journal, Vol.33, No.1, pp.8-25. (EI)

  23. C.R. Yang, R.T. Lee , Y.C. Chiou, 1997, “Study o­n dynamic friction characteristics in reciprocating friction drive system”, Tribology International, Vol.30, No.10, pp.719-731. NSC-85-2212-E-110-027

  24. R.T. Lee and W.Y. Chiou, 1997, “An Efficient Multilevel Finite Element Approach to Three-Dimensional Phase-Change Problems”, Numerical Heat Transfer, Part: B, Vol. 31, pp. 73-89. NSC-83-0401-E-0110-0022

  25. Y. C. Chiou, R. T. Lee , J. Y. Tasy, 1998,“ An o­n-line hall-effect device for monitoring particle in oils “, Wear, Vol.223, pp. 44-49. NSC-85-2212-E-110-011 (SCI)

  26. R. T. Lee , Y. C. Chiou, J. H. Chang, 1998, “ Effect of pre-loading operation o­n fatigue life of lubricated rolling/sliding contact “, Wear, Vol.217, pp. 95-103. NSC-80-0401-E-110-009 (SCI)

  27. R. T. Lee , Y. C. Chiou, J. H. Chang, 1999, “Study o­n slip displacement and stick-slip characteristics in reciprocating friction drive system”, Tribology International, Vol.32, pp. 97-106. NSC-86-2212-E-110-008 (SCI)

  28. Y. C. Chiou, R. T. Lee and C. M. Lin, 1999, “Formation criterion and mechanism of electrical pitting o­n the lubricated surface under AC electric field”, Wear, Vol. 236, pp62-72, NSC-88-2212-E-110-003 (SCI)

  29. C. R. Yang, Y. C. Chiou and R. T. Lee , 1999, “Tribological behavior of reciprocating friction drive system o­n the lubricated contact”, Tribology International, Vol.32, pp. 443-453. NSC-85-2212-E-110-010 (SCI)

  30. Y. C. Chiou, R. T. Lee and Y. C. Lin, 2000, “Fundamental study o­n tribological characteristics of reciprocating friction drive system and its application ”, J. CSME, Vol. 21, No. 6, pp.567-576. NSC-86-2212-E-110-008 (EI)

  31. H. H. Chung , R. T. Lee and Y. C. Chiou, 2001,”Arc erosion behavior of silver electric contact in a single arc discharge between static gap”, IEE Proc. Sci., Meas. Technol., Vol.148, No.1,pp.8-14. NSC-86-2212-E-110-008 (SCI)

  32. C. M. Lin and Y. C. Chiou, R. T. Lee , 2001, ”Pitting mechanism o­n the lubricated surface of babbitt alloy/bearing steel pair under AC electrical field”, Wear, Vol.249, pp.133-142. NSC-88-2212-E-110-003 (SCI)

  33. W.Y. Chiou and R.T. Lee , 2001, “Finite-Element Analysis of Heat Conduction Problems With Irregular region Boundary Using Multilevel Techniques”, Numerical Heat Transfer, Part: B, Vol. 40, pp. 179-198. NSC-88-2212-E151-012.

  34. H. H. Chung , R. T. Lee and Y. C. Chiou, 2002, ”Erosion mechanism of silver in a single arc discharge across a static gap”, IEE Proc. Sci., Meas. Technol., Vol.149, No.4, pp.172-180. NSC-88-2212-E-110-003 (SCI)

  35. R.T. Lee , H.M. Chu and Y.C. Chiou, 2002, “Inverse approximation for calculating pressure distribution in elastohydrodynamic lubrication”, Tribology International, Vol.35, pp.809-817. NSC-85-2212-E-110-005 (SCI)

  36. Y.C. Chiou, Y.P. Chang and R.T. Lee , 2003, “Tribo-electrification mechanism for self-mated metals in dry severe wear process —part1: pure hard metals”, wear, Vol.254, pp.606-615. NSC-89-2212-E-110-047 (SCI)

  37. Y.C. Chiou, Y.P. Chang and R.T. Lee , 2003, “Tribo-electrification mechanism for different elf-mated metals under dry reciprocating friction—part2: pure soft metals”, Wear, Vol.254, pp.616-624. NSC-89-2212-E-110-047 (SCI)

  38. R.T.Lee , H. M. Chu, and Y.C. Chiou,2003, “Inverse approach for estimating pressure and viscosity in elastohydrodynamic lubrication of circular contacts”, Proc. Instn Meth. Engrs, Part J:J.Engg.Tribology, Vol.217, pp.277-288. NSC-91-2212-E-110-005 (SCI)

  39. H.M. Chu, R.T. Lee and Y.C. Chiou,2004, “Inverse approach for calculating pressure and viscosity in pure squeeze EHL motion of circular contacts”, Tribology International,Vol.37, pp.375~384. NSC-91-2212-E-110-005 (SCI)

  40. Y.P. Chang, Y.C. Chiou and R.T. Lee , 2004, “Transition mechanism of tribo-electrification for self-mated metals in dry severe wear process”, Wear, Vol.257, pp.347~358. NSC-89-2212-E-110-047 (SCI)

  41. C.M. Lin, Y.C. Chiou and R.T. Lee , 2004, “Effect of MoS 2 additive o­n electrical Pitting Mechanism of Lubricated Surface for Babbitt Alloy/Bearing Steal Pair under AC electric field”, Wear, Vol. 257, pp. 833~842. NSC-92-2212-E-110-023 (SCI)

  42. H.M. Chu, R.T. Lee and Y.C. Chiou, 2004, “Study o­n Pure Squeeze Lastohydrodynamic Lubrication Motion Using Optical Interferometry and the Inverse Approach”, Proc. Instn. Mech. Engrs, Part J: Journal of Engineering Tribology, Vol.218, pp.503-512. (SCI)

  43. C.R. Yang, P.Y. Chen, C.H. Yang, Y.C. Chiou and R.T. Lee, 2005, “Effects of Mechanical Agitation and Surfactants Additive o­n Silicon Anisotropic Etching in Alkaline KOH Solution”, Sensors and Actuator A, Vol.119, pp. 263-270 NSC-91-2218-E-003-001 (SCI)

  44. C.R. Yang, P.Y. Chen, C.H. Yang, Y.C. Chiou and R.T. Lee, 2005, “Effects of Various Ion-typed Surfactants o­n Silicon Anisotropic Etching Properties in KOH nd TMAH Solution”, Sensors and Actuator A, Vol.119, pp.271-281 NSC-91-2218-E-003-001 (SCI)

  45. R.T. Lee, Y.C. Hwang and Y.C. Chiou, 2005, “Lapping of Ultra-Precision Ball Surfaces Part I:Concentric V-Groove Lapping System”, International Journal of Machine Tools and Manufacture, in press. NSC-92-2212-E-110-022 (SCI)

  46. R.T. Lee, Y.C. Hwang and Y.C. Chiou, 2005, “Lapping of Ultra-precision Ball Surfaces Part II:Eccentric V-groove Lapping System”, International Journal of Machine Tools and Manufacture, in press. NSC-92-2212-E-110-022 (SCI)

  47. Y.P. Chang, Y.C. Chiou and R.T. Lee, 2005, “Tribo-electrification Mechanisms for dissimilar Metal Pairs in Dry Severe Wear Process—Part I: Speed Effect”, to be submitted to Wear. NSC-92-2212-E-110-025 (SCI)

  48. Y.P. Chang, Y.C. Chiou and R.T.Lee, 2005, “Tribo-electrification Mechanisms for dissimilar Metal Pairs in Dry Severe Wear Process—Part II: Load Effect”, to be submitted to Wear. NSC-92-2212-E-110-025 (SCI)

  49. Y.C. Chiou, R.T. Lee and C.L.Yau, 2005, “A Novel Method of Composite Electroplating o­n Lap in Lapping Process”, revised to International Journal of Machine Tools and Manufacture. NSC-91-2212-E-110-019 (SCI)

  50. Y.C. Chiou, C.W. Lee and R.T. Lee, 2005, “Forming Mechanism of Bubble Layer in Electrochemical Discharge Process”, to be submitted to Electrochimica Acta. NSC-93-2212-E-110-024 (SCI)

  51. H.M. Chu, R.T. Lee, S.Y. Hu and Y.P. Chang, 2005, “Rheological characteristics for thin film elastohydrodynamic lubrication”, Journal of Mechanics 21(2), pp.77-84 NSC-91-2212-E-110-012(SCI)

  52. H.M. Chu, R.T. Lee and Y.C. Chiou, 2006, “Inverse Approach for Estimating Rheological Characteristics of Adsorption Layer in Thin Film EHL Contacts”, Tribology International, Vol.39, pp.50-59, NSC-91-2212-E-110-012 (SCI)

瀏覽數: