跳到主要內容區

Top

相關著作(Y.C.Tsai)

期刊論文(Refereed Journal Papers)

    1. Tsai, Y. C. and A. H. Soni, 1981, "Accessible Region and Synthesis of Robot Arms, " Journal of Mechanical Design, ASME Trans.,Vol. 103, No. 4, pp. 803-811.

    2. Tsai, Y. C. and A. H. Soni, 1983, "An Algorithms for the Workspace of a General n-R Robot," Journal of Mechanisms, Transmissions and Automations in Design, ASME Trans, Vol. 105, No. 1, PP. 52-57.

    3. Tsai, Y. C. and A. H. Soni, 1984, "The Effect of Link Parameter o­n the Workspace of General 3R Robot Arms, " Mechanism and Machine Theory, Pergamon Press Ltd., Vol. 19, No. 1, pp. 9-11.

    4. Tsai, Y. C. and A. H. Soni, 1985, "Workspace Synthesis of 3R, 4R, 5R, and 6R Robots, " Mechanism and Machine Theory, Pergamon Press Ltd., Vol. 20, No. 6, pp. 555-563.

    5. Tsai, Y. C. and P. C. Chin, 1986, "Mathematical Models of Gleason and klingelnberg Spiral Bevel Gears," Proceedings of the National Science Council ROC, Part A: Physical Science and Engineering, NSC, Vol. 10, No. 4, pp. 432-442.

    6. Tsai, Y. C. and P. C. Chin, 1986, "Modified Chebyshev Spacing Methods for Kinematic Synthesis," Journal of the Chinese Society of Mechanical Engineers, Vol. 7, No. 5,pp. 335-344.

    7. Tsai, Y. C. and P. C. Chin, 1987, "Surface Geometry of Straight and Spiral Bevel Gears, " Journal of Mechanisms, Transmissions and Automations in Design, ASME Trans., Vol. 109, No. 4, pp. 443-449.

    8. Chin, P. C. and Y. C. Tsai, 1987, "The Bicubic B-Spline Surface Representation of Bevel Gears, " Journal of the Chinese Society of Mechanical Engineers, Vol. 8, No.6, pp. 409-417.

    9. Tsai, Y. C. and M. F. Tsai, 1988, "A Study o­n the Basic Kinematics of Hypoid Gear Transmission, " Journal of the Chinese Society of Mechanical Engineers, Vol. 9, No. 2, pp. 159-165.

    10. Chang, H. L. and Y. C. Tsai, 1988, "A Study o­n the Surface of Bevel Gears by Using Displacement Transformation Matrix, " The Chinese Journal of Mechanics, Vol. 4, No. 1, pp. 9-16.

    11. Tsai, Y. C. and Y. J. Su, 1989, "Mathematical Model of Shifted Bevel Gears, " Journal of the Chinese Society of Mechanical Engineers , Vol. 10, No. 6, pp. 461-467.

    12. Tsai, Y. C. and R. H. Sun, 1990, "Determination of Kinematic Parameter Errors in Manipulators by Zero Eigenvalue Method, " Proceedings of the National Science Council ROC, Part A: Physical Science and Engineering, NSC, Vol. 14, No. 1, pp. 35-42 (NSC-75-0611-E-0110-0002).

    13. Tsai, Y. C., L. M. Sung, and H. L. Chang, 1990, "A Study o­n Torque Parameters and Mathematical Models of Worm Gear Sets, " Journal of the Chinese Society of Mechanical Engineers, Vol. 11, No. 2, pp. 135-145 (NSC-76-0401-E-0110-0007).

    14. Chang, H. L. and Y. C. Tsai, 1992, "A Study of the Linear Parametric Tooth Profiles Using Pressure Angle, " Journal of the Chinese Society of Mechanical Engineers,vol. 13, N0.1, pp. 17-25 (NSC-80-0401-E-0110-0005).

    15. Chang, H. L. and Y. C. Tsai, 1992, "A Mathematical Model of Parametric Tooth Profiles for Spur Gears, " Journal of Mechanical Design, ASME Trans., vol. 114, no.1, pp. 8-16 (NSC-77-0401-E-0110-0008).

    16. Chang, H. L. and Y. C. Tsai, 1993, "Fessible Design Space of the Pressure Angle for Spur Gears, " Journal of Mechanism and Machine Theory, vol. 28, no. 2, pp. 181 - 192 (NSC-81-0401-E-0110-0005).

    17. Tsai, Y. C. and L. M. Sung,1993, "A Kinematic Study for Gear Sets with Skew Axes," Journal of Applied Mechanisms and Robotics ,vol.1, no.1, pp.36 - 44 (invited paper of the first issue)(NSC-80-0401-E-0110-0005) .

    18. Sun, R. H. and Y. C. Tsai, 1993, "An Analytical Model for Optimization of NC Tool Path by Window Frame Operation," Journal of the Chinese Society of Mechanical Engineers, vol. 14, no.5, pp.483 - 491.

    19. Sun, R. H. and Y. C. Tsai, 1994, "A Mathematical Model for the Short Cut of NC Tool Path o­n Window Frame Operation," Journal of Materials Processing Technology, vol. 40, pp.465 - 475.

    20. Sung, L. M. and Y. C. Tsai, 1994,"An Investigation of the Tooth Proporties and Misalignments of Involute Bevel Gear Sets," Journal of the Chinese Society of Mechanical Engineers, vol. 15, no. 3, pp. 273 - 281 (NSC-82-0401-E-0110-0026).

    21. Sun, R. H. and Y. C. Tsai,1994, "A Modified Analytical Model for Optimization of NC Cutting Path." International Journal of Production Research, vol. 32, no. 10, pp. 2335 - 2344.

    22. Sung, L. M. and Y. C. Tsai, 1994,"Tooth Proportions of Nonstandard Involute Helical Gears," Journal of the Chinese Society of Mechanical Engineers, vol. 15, no. 5, pp. 487 - 496 ( NSC-83-0401-E-110-011).

    23. Chen, B. Y. and Y. C. Tsai , 1995, "A Kinematic Study of the Location of a Stright Line Segment Trajectory for 2R Planar Manipulators," Journal of Applied Mechanisms and Robotics, vol. 2, no. 2, pp. 34 - 41 ( NSC-82-0209-E-110-074).

    24. Sun, R. H. and Y. C. Tsai, 1996,"A Mathematical Analysis for Cutter Size Selection o­n Milling Convex Prismatic Pockets," Journal of the Chinese Society of Mechanical Engineers, vol. 16, no. 1, pp. 69 - 74.

    25. Sung, L. M. and Y. C. Tsai, 1997,"A Study o­n the Mathematical Models and Contact Ratios of Extended Cycloid and Cycloid Bevel Gear Sets," Journal of Mechanism and Machine Theory, vol. 32, no. 1, pp. 39 - 50 ( NSC-83-0401-E-110-01).

    26. Lei, S. H. and Y. C. Tsai, 1997, "A Design Methodology for Mechanisms using Phase Diagram Concept ant Its Application o­n Single-Loop Forging Press," Journal of Applied Mechanisms and Robotics, accepted and in press.

    27. Tsai, Y. C. and S. H. Lei, 1997, "Graphical Aided Emulation of Conceptual Complex Kinematics Pairs," Journal of Applied Mechanisms and Robotics, accepted and in press.( NSC-84-2611-E-110-001).

    28. Tsai, M. H. and Y. C. Tsai , 1997, "A Method for Calculating Static Transmission Errors of Plastic Spur Gears using FEM Evaluation," the internation Journal of Finete Elements in Analysis and Design, accepted and in press.(NSC-83-0422-E-110-003).

    29. Tsai, M. H. and Y. C. Tsai , 1997, "Design of High-Contact-Ratio Spur Gears Using Quadratic Parametric Tooth Profiles," accepted for publication in the Journal of Mechanism and Machine Theory.(NSC-84-0422-E-110-001).

    30. Tsai, M. H., S. F. Lin, and Y. C. Tsai , 1997, "Diagonoses of Operational Errors of Treaded Wheel Grinder in Grinding Spur Gears Using Kinematic Transmission Errors ," accepted for publication in the Journal of Material Processing Technology. (NSC-84-0422-E-110-001).

    31. Jehng, W. K. and Y. C. Tsai, 1999, “Rapid Prototyping and Manufacturing Technology Applied to Form Spherical Gears with Skew Axes,” the Journal of Materials Processing Technology, vol. 95, no. 6, pp. 169-179. (NSC-87-2212-E-110-010).[SCI, EI]

    32. Jehng, W. K. and Y. C. Tsai, 1999, “Kinematics Parametric Method to Generate New Tooth Profiles of Gear Sets with Skew Axes,” Mechanism and Machine Theory, vol. 34, no. 6, pp. 857-876. (NSC-88-2212-E-110-009). [SCI, EI]

    33. Tsai, Y. C. and J. M. Hsieh, 2001, “A Study of the Design and NC Manufacturing Model of Ball-End Cutters,” Journal of Materials Processing Technology, Vol. 117, No. 1-2, pp.183-192. [SCI, EI]

    34. Tsai, Y. C., P. C. Huang, and P. C. Chin, 2003, “An Error Reduction for Roller Gear Cam Mechanisms,” Journal of the Chinese Society of Mechanical Engineers, Vol. 24, No. 1, pp. 13-25. [ EI]

    35. Hsu, Y. C., Y. C. Tsai, Y. L. Ho, M. T. Sheen, J. H. Kuang, and W. H. Chang, 2004, “A Novel Fiber Alignment Shift Measurement and Correction Technique in Laser-Welded Laser Module Packaging,” accepted to publish in the Journal of Lightwave Technology. [SCI, EI]

    36. Tsai, Y. C. and J. M. Hsieh, 2004, ”An Analysis of Cutting-edge Curves and Machining Performance in the Inconel 718 Machining Process,” the International Journal of Advanced Manufacturing Technology, o­nline Issue DOI:10.1007/s00170-003-1869-6. [SCI, EI]

    37. Tsai Y. C., S. H. Lei and H. Sudin, 2005, “Design and Analysis of Planar Compliant Microgripper Based o­n Kinematic Approach,” Journal of Micromechanics and Microengineering, Vol. 15, pp. 143-156. (NSC-91-2212-E-110-008, NSC-92-2212-E-110-003)[SCI, EI]

    38. Lin, H. Y. and Y. C. Tsai, “On the Natural Frequencies and Mode Shapes of a Uniform Multi-span Beam Carrying Multiple Point Masses,” submitted to the Journal of Structural Engineering and Mechanics. [SCI, EI]

    39. Tsai, Y. C. and W. Y. Hsu, “Computer-Aided Design of the Point-Contact Bevel Gear Set with Circular-Arc Tooth Profiles,” submitted to the Journal of Computer-Aided Design. [SCI, EI]

      國內、外學術研討會論文 (Conference Papers )

    40. Tsai, Y. C., A. H. Soni and D. C. Tao, 1979, "Design of an Inverted Slider-Crank Mechanism, " Proceedings of the 6th Applied Mechanisms Conference, Denver, Colorado, , pp. XXXIII-1--XXXIII-5.

    41. Tsai, Y. C. and A. H. Soni, 1981, "The Effect of Link Parameters o­n the Workspace of General 3R Robot Arms, " proceedings of the 7th Applied Mechanisms Conference, Kansas City, Missouri, pp. III-1 - III-6.

    42. Naganathan, G. and Y. C. Tsai, 1982, "Human Joint Motion Synthesis for Industrial Weight-Lifting Task, " Proceedings of the 13th Southwestern Graduate Research Conference in Applied Mechanics, University of Oklahoma, Norman, Oklahoma, pp. 112-119.

    43. Soni, A. H., V. Srinivason, M. R. Gudavalli and Y. C. Tsai, 1982, "Clinical Evaluation of the Radiographs of the Scoliotic Spine, " Proceedings of the 28th ORS Annual Meeting, Denver, Colorado.

    44. Tsai, Y. C. and J. S. Feng, 1983, "Simulation of 3R Robots o­n Microcomputer, " Proceedings of the 1983 Symposium o­n Automation Control, Taiwan, pp. 382-400.

    45. Tsai, Y. C. and A. H. Soni, 1983, "Volumetric synthesis of 3R, 4R, 5R, and 6R Robots, Part I : Methodology, " Proceedings of the 6th World Congress o­n Theory of Machines and Mechanisms, New Dehli, India, pp. 1025 -- 1028.

    46. Tsai, Y. C. and A. H. Soni, 1983, "Volumetric synthesis of 3R, 4R, 5R, and 6R Robots, Part II : Synthesis, " Proceedings of the 6th World Congress o­n Theory of Machines and Mechanisms, New Dehli, India, pp. 1063 -- 1066.

    47. Tsai, Y. C. 1984, "Input-Point-Path Generation of Four Bar Mechanisms, " Proceedings the 1st International Symposium o­n Design and Synthesis, Tokyo, Japan, pp. 367-372.

    48. Tsai, Y. C. 1984, "Synthesis of Four Bar Mechanisms," Proceedings of the 1st National Conference o­n Mechanical Engineering, CSME, Chung-Li, Taiwan, pp. 155-162.

    49. Tsai, Y. C. and D. S. Shih, 1985, "Computer-Aided Kinematic Design of General Robots, " Proceedings of the 6th IASTED International Symposium o­n Robotics and Automation, ISBN 0-88986-075-0, Santa Barbara, California, pp. 92-96.

    50. Chen, W. S. and Y. C. Tsai, 1985, "Kinematic Design of Four-Bar Pendulum, " Proceedings of the 2nd National Conference o­n Mechanical Engineering, CSME, Kaohsiung, Taiwan, pp. 397-401.

    51. Chang, H. L. and Y. C. Tsai, 1985, "Nonlinear Programming with Multiconstraints for Mechanism Design, " Proceedings of the 2nd National Conference o­n Mechanical Engineering, CSME, Kaohsiung, Taiwan pp. 389-396. (in Chinese)

    52. Tsai, Y. C. and P. C. Chin, 1986, "Surface Geometry of Straight and Spiral Bevel Gears, " ASME Design Engineering Technical Conference, Columbus, Ohio, ASME Paper No. 86-DET-133.

    53. Chang, H. L. and Y. C. Tsai, 1986, "A Study o­n the Surface of Bevel Gears by Using Displacement Transformation Matrix, " Proceedings of the 10th National Conference o­n Theoretical and Applied Mechanics, STAM, R. O. C., Kaohsiung, pp. 203-212. (in Chinese)

    54. Chin, P. C.and Y. C. Tsai, 1986, "The Bicubic B-Spline Surface Representation of Bevel Gears, " Proceedings of the 3rd National Conference o­n Mechanical Engineering, CSME, Chung-Li, R. O. C., pp. 523-533. (in Chinese)

    55. Tsai, Y. C., J. H. Kuang, C. H. Chien, H. L. Chang, 1987, "Computer-Aided Design of 2-D Single Stage Blanking Die, " Proceedings of the First National Workshop o­n Automation Technology, pp. 13 - 31. (in Chinese)

    56. Chang, H. L. and Y. C. Tsai, 1987 "A Study o­n the Surface of Bevel Gears by Using Displacement Transformation Matrix, " presented at the 10th Applied Mechanisms Conference, New Orleans, Louisiana.

    57. Tsai, Y. C. and M. F. Tsai, 1987, "A Study o­n the Basic Kinematics of Hypoid Gear Transmission, " Proceedings of the 4th National Conference o­n Mechanical Engineering, CSME, Hsingchu, R. O. C., pp. 703 - 712.

    58. Tsai, Y. C. and R. H. Sun, 1987, "Determination ofKinematic Parameter Errors in Manipulators by Zero Eigenvalue Method, " Proceedings of the 4th National Conference o­n Mechanical Engineering, CSME, Hsingchu, R. O. C., pp. 729 - 739. (in Chinese)

    59. Hsu, C. H., K. T. Lam, and Y. C. Tsai, 1988, "Computer-Aided Kinematic Analysis and Dynamic Simulation of Planar Six-Bar Mechanisms," Proceedings of the Second Workshop o­n Automation Technology, Kenting, R. O. C., pp. 43 - 51. (in Chinese)

    60. Tsai, Y. C. and R. H. Sun, 1988, "Determination of Kinematic Parameter Errors in Manipulators by Zero Eigenvalue Method, " Proceedings of the International Symposium and Exposition o­n Robots, Sydney, Australia.

    61. Chiou, C. Y., and Y. C. Tsai, 1988, "Determination of Joint Clearances and Link Tolerances in Spherical Four-Bar Linkages, " Proceedings of the 5th National Conference o­n Mechanical Engineering, CSME, Taipei, R. O. C., pp. 1165 - 1176.

    62. Tsai, Y. C. and Y. J. Su, 1988, "Mathematical Model of Shifted Bevel Gears, " Proceedings of the 5th National Conference o­n Mechanical Engineering, CSME, Taipei, R. O. C., pp. 1217 - 1225.

    63. Tsai, Y. C. H. L. Chang, and L. M. Sung, 1988, "The Study o­n Mathematical Models of Worm Gear Sets, " Proceedings of the 5th National Conference o­n Mechanical Engineering, CSME, Taipei, R. O. C., pp. 1227 - 1239. (in Chinese)

    64. Tsai, Y. C. and B. Y. Chen, 1989, "An Optimum Design of Automobile Steering Mechanisms, " Proceedings of the 1st National Applied Mechanisms & Robotics Conference, Cincinnati, Ohio. U. S. A., pp. 89AMR-7B-1 (1-8).

    65. Tsai. Y. C., L. M. Suhng, and H. L. Chang, 1989. "A Study o­n Torque Parameters and Mathematical Models of Worm Gear Sets, " Proceedings of the 6th National Conference o­n Mechanical Engineering, CSME, Tainan, R. O. C., pp. 1431 - 1443. (in Chinese)

    66. Ku, Y. B. and Y. C. Tsai, 1989, "The Effect of Steering Mechanisms o­n Handling and Stability of Motorcycles, " Proceedings of the 6th National Conference o­n Mechanical Engineering, CSME, Tainan, R. O. C., pp. 1445 - 1457.

    67. Lia, J. M. and Y. C. Tsai, 1990, "A Study o­n Joint Clearnances and Feasible Joint Allocation in Spherical Four-Bar Linkages, " Proceedings of the 7th National Conference o­n Mechanical Engineering, CSME, Hsinchu, R. O. C., pp. 1741 - 1751. (in Chinese)(NSC-78-0210-E-0110-0001).

    68. Chang, H. L. and Y. C. Tsai, 1990, "Parametric Tooth Profiles for Bevel Gears, " Proceedings of the 1990 ASME Conference o­n the Flexible Assembly System, Chicago, Illinois, U. S. A., ASME,DE-Vol. 28, pp.5 - 16 (NSC-78-0401-E-0110-0006).

    69. Chang, H. L. and Y. C. Tsai, 1991, "An Investigation o­n the Design Space for Parametric Tooth Profiles, " Proceedings of the 8th World Congresson o­n the Theory of Machines and Mechanisms, Prague, Czechoslovakia, Vol. 2,pp. 539 - 542.

    70. Ton., K. N. and Y. C. Tsai, 1991, "A Study of the Storage Spacs of Robots, " Proceedings of the 2st National Applied Mechanisms & Robotics Conference, Cincinnati, Ohio. U. S. A, Vol. II, PP. VIIIA-1 -- VIIIA-4 (NSC-79-0209-M-0011-0004).

    71. Lai, C. C. and Y. C. Tsai, 1991, "A Study of Helical Gears: Profile and Kinematic Analysis," Proceedings of the 8th National Conference o­n Mechanical Engineering, CSME, Taipei, R. O. C., pp. 1305 - 1314.(in Chinese) (NSC-78-0201-E-0110-0001).

    72. Chiou, C. Y., and Y. C. Tsai, 1991, "Synthesis and Analysis o­n a Spatial Retract Mechanisms of Landing Gear with Strut Shirnked," Proceedings of Aero. and Astro. Conf., AASRC, pp. 733 - 741 (NSC-75-0210-D-0110-0002-R).

    73. Tsai, Y. C. and H. L. Chang, 1992, "Reconsideration of the Logix Gear Using a General Mathematical Model of Composite Gear Profiles," Proceedings of the 1992 ASME Design Technical Conference- 6th International Power Transmission and Gearing Conference,Scottsdale, Arizona, U. S. A., ASME, DE-Vol. 43-1, pp. 169 - 176 (NSC-80-0401-E-0110-0004).

    74. Sun, R. H. and Y. C. Tsai, 1992, "A Mathematical Model for Optimization NC Tool Path for Face Milling Triangular Flat Surfaces," Proceedings of the 9th National Conference o­n Mechanical Engineering, CSME, Kaohsiung, R. O. C., pp.223 - 231.

    75. Chang, Y. L.and Y. C. Tsai, 1992, "The Optimal Design of Robots for Specified Working Enviroment," Proceedings of the 9th National Conference o­n Mechanical Engineering, CSME, Kaohsiung, R. O. C., pp.437 - 446.(in Chinese)

    76. Chang, Y. P.and Y. C. Tsai, 1992, "Dimensional synthesis of Planar Mechanisms Using Continuation Method," Proceedings of the 9th National Conference o­n Mechanical Engineering, CSME, Kaohsiung, R. O. C., pp.447 - 455.(in Chinese).

    77. Chen, B. Y. and Y. C. Tsai , 1993, "A Kinematic Study of the Location of a Stright Line Segment Trajectory for 2R Planar Manipulators," Proceedings of the 3rd National Applied Mechanisms & Robotics Conference, Lexington, Kentucky. U. S. A, pp. AMR-93-015-01 -- 08 (NSC-82-0209-E-0110-0074).

    78. Liang, Y. C.,and Y. C. Tsai , 1993, "A Study of Linkage Propulsion System for Submersibles," Proceedings of the 10th National Conference o­n Mechanical Engineering, CSME, Hsinchu, R. O. C., pp.357 - 365 (in Chinese).(NSC-83-0209-E-0110-0005).

    79. Lei, S. H., and Y. C. Tsai, 1994, "A Method for Type Synthesis of Mechanisms Using Phase Diagrams," Proceedings of the 1994 ASME Design Technical Conference- Mechanism Synthesis and Analysis,Minneapolis, Minnesota, U. S. A., ASME, DE-Vol. 70, pp. 43 - 50 (NSC-82-0209-E-110-074).

    80. Tsai, Y. C., and C. N. Tsay, 1995, "A Study o­n the Tool-path Generation of Surface Rough-milling," Proceedinbgs of the Eighth National Conference o­n the Automation Chung Li, Taiwan, July 11-12, pp53 - 59, (NSC 83-0425-E-110-002).

    81. Tsai, Y. C., and S. H. Lei, 1995, "Graphical Enumeration of Conceptual Simple Kinematic Pairs," Proceedings of the Ninth World Congress o­n the Theory of Machines and Mechanisms, Milano, Italy, August 30 - september 2, pp. 1625 - 1629, (NSC 83-0209-E-110-005) .

    82. Tsai, Y. C. and C. S. Chang, 1995, "An Analysis o­n the Contact Path of Roller Gear Cams," Proceedings of the 12th National Conference o­n Mechanical Engineering, CSME, Chia-Yi, R. O. C., pp.171 - 179.(in Chinese), (NSC 83-0425-E-110-002).

    83. Tsai, Y. C. and M. S. Chen, 1995, "A Study of the Thrust Force o­n Rollers of Roller Gear Cams," Proceedings of the 12th National Conference o­n Mechanical Engineering, CSME, Chia-Yi, R. O. C., pp.181 - 188.(in Chinese) , (NSC-83-0425-E-110-002).

    84. Tsai, Y. C., and S. H. Lei, 1995, "Graphical Aided Enumeration of Conceptual Complex Kinematic Pairs," Proceedings of the 4th National Applied Mechanisms and Robotics Conference, Cincinnati, OH, USA, Dec 10 - 13, pp. 069-01 - 069-09 (NSC-84-2611-E-110-001).

    85. Lei, S. H. and Y. C. Tsai, 1995, "A Design Methodology for Mechanisms using Phase Diagram Concept ant Its Application o­n Single-Loop Forging Press," Proceedings of the 4th National Applied Mechanisms and Robotics Conference, Cincinnati, OH, USA, Dec 10 - 13, pp. 070-01 - 070-06.

    86. Fu, T. C., Y. C. Tsai, S. H. Lei., and K. M. Kuang, 1997, "A Creative Design Methodology of New Mechanisms for Multi-action Forging Die Set," Proceedings of the 4th International Conference o­n Die and Mould Technology, Kuala Lumpur, Malaysia, June 5 - 6, pp. 195 - 203.

    87. Tsai, Y. C., H. H. Lin, Lee, J. S., and S. H. Lei, 1997, "A Computer Aided Tool for Analyzing Linkage Type Mechanisms of Multi-action Forging Die Set," Proceedings of the 4th International Conference o­n Die and Mould Technology, Kuala Lumpur, Malaysia, June 5 - 6, pp. 204 - 213.

    88. Tsai, Y. C., and P. C. Huang, 1997, "Adaptive Assembly of Roller Gear Cam Mechanism," accepted for presentation at the 5th National Applied Mechanisms and Robotics Conference, Cincinnati, OH, USA, Oct. 12 - 15, (NSC-85-2622-E-110-006).

    89. Tsai, Y. C., and S. H. Lei, 1997, "A Linguistic Aided Engineering Process Design for Complex Manufacturing," accepted for presentation at the 5th National Applied Mechanisms and Robotics Conference, Cincinnati, OH, USA, Oct. 12 - 15.

    90. Lei, S. H, K. M. Kuang, and Y. C. Tsai, 1997, "A Process for the Development of Mechanisms for MAF Die Set," accepted for presentation at the 5th National Applied Mechanisms and Robotics Conference, Cincinnati, OH, USA, Oct. 12 - 15.

    91. Tsai, Y. C., S. S. Chiang, and H. L. Chang, 1999, “A Study o­n Curvic Coupling Applied to the Index Table,” Tenth World Congress o­n the Theory of Machine And Mechanisms, Oulu, Finland, June 20-24, Vol. 1, pp. 278-283.(NSC-87-2622-E-110-001).

    92. Tsai, Y. C., D. Shen, and H. L. Chang, 1999, “A Study o­n Three-Disc Type Curvic Coupling Applied to the Indexing Mechanism,” Proceedings of the 16th National Conference o­n Mechanical Engineering, CSME, Hsinchu, Taiwan, R. O. C., Dec 3-4, Vol. 3, pp. 474-481. (NSC-88-2622-E-110-001).

    93. Tsai, Y. C. and W. K. Jehng, 1999, “An Investigation to the Tooth Profile Properties of Type TJ-I Gear Set for Skew Axes,” Proceedings of the 2st National Conference o­n the Design of Mechanisms and Machines, Shinchu, Taiwan, R. O. C., pp. 302-307. (NSC-88-2212-E-110-009).

    94. Tsai, Y. C. and C. T. Lin, 2000, "Manufacturing Errors Analysis and Measurement of Indexing Mechanism of Curvic Couplings," Proceedings of the 3rd National Conference o­n the Design of Mechanisms and Machines, Kaohsiung, Taiwan, R. O. C., Dec. 8, pp. 87-94. (NSC-89-2622-E-110-002).

    95. Tsai, Y. C. and H. Z. Tsai, 2000, "An Analysis o­n the Blade Design Parameters of Turbo Molecular Pumps," Proceedings of the 17rd National Conference o­n Mechanical Engineering, Kaohsiung, Taiwan, R. O. C., Dec. 9-10, pp. 241-248.(NSC-87-2622-E-110-002).

    96. Tsai, Y. C., D. M. Tsay, C. Z. Kuo, and C. C. Giao, 2001, “The Design and Manufacture of the Turbo Molecular Pump,” Proceedings of the Second Cross-Strait Workshop o­n Manufacturing Technology, Dalian, China, Sept. 3-5, Dalian, China, September, pp.3-5.

    97. Tsai, Y. C., W. Y. Hsu, C. H. Huang, and L. Y. Liu, 2001, “The Study of the Comparsion of the Indexing Accuracy of Curvic Couplings,” Proceedings of the Fourth National Conference o­n Design of Mechanisms and Machines, Changhua, Taiwan, R. O. C., Nov. 16, pp.91-96.(NSC-89-2212-E-110-051).

    98. Tsai, Y. C., H. M. Kuo, H. L. Chang, and W. K. Jehng, 2001, “A Study o­n thr Bevel Gear with Circular-Arc Tooth Profiles,” Proceedings of the 18th National Conference o­n Mechanical Engineering, CSME, Taipei, Taiwan, R. O. C., Dec. 7-8, pp.687-693.(NSC-89-2212-E-110-041).

    99. Hsieh, J. M., Y. C. Tsai, and J. H. Yeh, 2002, “Analysis of the Cutting-edge Curve o­n Machining Performance in Inconel 718 Machining Process,” Proceedings of the 19th National Conference o­n Mechanical Engineering, CSME, Yun Lin, Taiwan, Nov. 29-30, pp. 1-8.

    100. Tasi, Y. C. and T. F. Hsieh, 2002, “A Study o­n the Design and Analysis of 3-Dimensional Micro-Optical Switch,” Proceedings of the 19th National Conference o­n Mechanical Engineering, CSME, Yunlin, Taiwan, Nov. 29-30, pp. 1-7. (NSC-90-2212-E-110-025)

    101. Tasi, Y. C. and L. Y. Liu, 2002, “The Study o­n the Optimization of Tooth Profiles for Curvic Couplings,” Proceedings of the 5th National Conference o­n Design of Mechanisms and Machines, Kaohsiung, Taiwan, R. O. C., Nov. 22, pp. 1-8. (NSC-90-2212-E-110-030)

    102. Tasi, Y. C. and W. Y. Hsu, 2002, “A Study o­n the CAD/CAM of Curvic Couplings,” Proceedings of ASME TURBO EXPO 2002, Amsterdam, Netherlands, Jun. 3-6, pp. 1-6. (NSC-90-2212-E-110- 030)

    103. Tsai, Y. C., C. H. Huang, and W. Y. Hsu, 2003, “A Study o­n the Crowning of Tooth Profiles of Curvic Couplings,” The 3rd National Conference o­n Precision Mechanical Manufacture, Kaohsiung, Taiwan, R. O. C., Nov. 15, pp. 9-16. (NSC-92-2212-E-110-002)

    104. 蔡穎堅, 林獻源, 龔皇光, 劉文賓, 2003, “快速高壓射臘矽膠模具應用在高爾夫球頭的製造 與研究,” 第三屆精密機械製造研討會, 高雄, 台灣, Nov. 15, pp. 61-65.

    105. Tsai, Y. C. and M. L. Hsieh, 2003, ”A Design o­n the Bevel Gear with Circular-Arc Tooth Profiles for Manufacture,” Proceedings of the 6th National Conference o­n Design of Mechanisms and Machines, Yunlin, Taiwan, R. O. C., Nov. 28-29, pp. 278-285.

    106. Tasi, Y. C. and B. J. Rung, 2003, “A Study o­n the Tooth Contact Ana;ysis of Gear Sets with Skew Axes,” Proceedings of the 20th National Conference o­n Mechanical Engineering, CSME, Taipei, Taiwan, Dec. 5-6, pp. 25-32. (NSC-91-2212-E-110-007)

    107. Tsai, Y. C. and C. C. Hsu, 2004, ”The Design and Analysis of Flexible Microjoint,” Proceedings of the 7th National Conference o­n Design of Mechanisms and Machines, Tainan, Taiwan, R. O. C., Nov. 20, pp. 544-550. (NSC-92-2212-E-110-003)

    108. Tasi, Y. C., Y. L. He, J. H. Kuang, W. H. Cheng, and Y. C. Hsu, 2004, “A Study of Post-Weld-Shift Measurement Technology in Cylinderical-Type Laser Diode Module Packages,” Proceedings of the 21th National Conference o­n Mechanical Engineering, CSME, Kaohsiung, Taiwan, Nov. 26-27, pp. 4673-4678.

    109. Tasi, Y. C., W. Y. Hsu, H. M. Kuo, and H. L. Chang, 2004, “A Design of Point-contact Bevel Gear Sets with Elliptic Paths,” Proceedings of the 21th National Conference o­n Mechanical Engineering, CSME, Kaohsiung, Taiwan, Nov. 26-27, pp. 1-9. (NSC-92-2212-E-110-002)

    110. Tasi, Y. C., S. H. Lei, and Y. A. Chen, 2004, “A Study o­n the Design and Analysis of Coronary Stents,” CD Proceeding of the International CAD Conference and Exhibition, Pattaya Beach, THAILAND.

    111.  

      其 他著作 (Other Publications )

        1. Tsai, Y. C., 1982, Synthesis of Robots/Manipulators for a Prescribed Working Space, Ph. D. Dissertation, Oklahoma State University, Stillwater, Oklahoma.

        2. Tsai, Y. C., 1984, "On the Microcomputer Aided Linkage Design, " Mechanical Engineering, CSME, No. 136, pp. 11 - 16.

        3. Tsai, Y. C. et al., 1986. "Mechanism Design of South Pointing Chariots, " Mechanical Engineering, CSME, No. 154, pp. 18-24.

        4. Hsu, C. H., K. T. Lam, and Y. C. Tsai, 1988, "Computer-Aided Kinematic Analysis and Dynamic Simulation of Planar Six-Bar Mechanisms, " Mechanical Engineering, CSME, No. 164, pp. 7 - 15. (in Chinese)

        5. 蔡得民、光灼華、黃光裕、林博正、蔡穎堅、陳遵立，1999，「機電磁整合扭力控制旋轉定位台設計與製造研究2/3」，國科會研究案NSC-88-2622-E-110-001 期末報告。

        6. 蔡穎堅、鄭文魁， 1999 ， 「TJ-I 型歪斜軸齒輪之齒面探討」， 國科會研究案NSC-87-2212-E110-009 期末報告。

        7. 蔡得民、光灼華、黃光裕、林博正、蔡穎堅、陳遵立，2000，「機電磁整合扭力控制旋轉定位台設計與製造研究3/3」，國科會研究案NSC-89-2622-E-110-002 期末報告。

        8. 蔡穎堅、鄭文魁，2000，「歪斜軸齒輪組嚙合特性及量測之研究1/2」，國科會研究案NSC-89-2212-E110-006 期末報告。

        9. 蔡穎堅，2001，「曲齒聯軸器設計及製造之研究1/2」，國科會研究案NSC-89-2212-E110-051期末報告。

        10. 蔡穎堅、鄭文魁，2001，「歪斜軸齒輪組嚙合特性及量測之研究2/2」，國科會研究案NSC-89-2212-E110-041 期末報告。

        11. 蔡穎堅、謝宗甫，2002，「光纖開關機構之合成研究」，國科會研究案NSC-90-2212-E-110-025 期末報告。

        12. 蔡穎堅、許偉宜、劉洛瑩、黃佳凰，2002，「曲齒聯軸器設計及製造之研究2/2」，國科會研究案NSC-90-2212-E-110-030 期末報告。

        13. 蔡穎堅、許偉宜、周志豪，2003，「曲齒聯軸器創成加工設計與製造之研究1/2」，國科會研究案NSC-91-2212-E-110-007 期末報告。

        14. 蔡穎堅、李少濠、洪文興，2003，「便於組裝及製造之微系統機構設計之研究1/3」，國科會研究案NSC-91-2212-E-110-008 期末報告。

        15. 蔡穎堅、許偉宜、周志豪，2004，「曲齒聯軸器創成加工設計與製造之研究2/2」，國科會研究案NSC-92-2212-E-110-002 期末報告。

        16. 蔡穎堅、李少濠、徐肇辰，2004，「便於組裝及製造之微系統機構設計之研究2/3」，國科會研究案NSC-92-2212-E-110-003 期末報告。

瀏覽數: