跳到主要內容區

Top

研討會論文(黃永茂老師)

1. M. Kiuchi, S. H. Hsiang, and Y.M. Hwang, 1987, "Analytical Model of Asymmetrical Rolling Processes of Sheets", 4th International Steel Rolling Conference (France), F.4.1.

2. M. Kiuchi and Y.M. Hwang, 1987, "Study on Complex Asymmetrical Rolling.1 -Investigation into Analytical Model-", Proceeding, S-62 Spring Conference of JSTP,131.

3. M. Kiuchi and Y.M. Hwang, 1987, "Study on Complex Asymmetrical Rolling.2 -Discussion on Some Numerical Calculations-", Proceeding, the 38th Joint Conference of JSTP , 29.

4. M. Kiuchi, Y.M. Hwang, and K. Shintani, 1988, "Study on Complex Asymmetrical Rolling.3 -Comparison Between Analytical Results and Experimental Results-", Proceeding, the 39th Joint  Conference of JSTP , 553.

5. M. Kiuchi and Y.M. Hwang, 1989, "Study on Complex Asymmetrical Rolling.4 -Effects of Rolling Conditions on Bonding Factors-", Proceeding, H-1 Spring Conference of JSTP, 681~684.

6. M. Kiuchi, Y.M. Hwang, and K. Shintani, 1989, "Study on Complex Asymmetrical Rolling.5 -Analyses and Experiments on Three Layers' Rolling-", Proceeding, the 39th Joint Conference of JSTP , 77~80.

7. M. Kiuchi and Y.M. Hwang, 1990, "Study on Rolling of Sheet Containing Inclusions", Proceeding, H-2 Spring Conference of JSTP , 311~314.

8. M. Kiuchi and Y.M. Hwang, 1990, "Mathematical Simulations of Complex Asymmetrical Rolling of Clad Sheets and Sandwich Sheets", Transactions of NAMRI/SME, 89~96.

9. Y.M. Hwang and M. Kiuchi, 1990, "Mathematical Model of Asymmetrical Complex Rolling of Multi-Layer Sheets", Proceeding, the 7th Conference of CSME, 753~760.

10. Y.M. Hwang and M. Kiuchi, 1990, "Analyses and Experiments of Asymmetrical Complex Rolling of Multi-Layer Sheets", Proceeding, the 7th Conference of CSME, 761~766.

11. 黃永茂, 徐宏修, 1991,*應用流線函數法於板材壓延之解析*,第十五屆全國力學會議論文集, 1097~1104,台南市.

12. 黃永茂, 廖金木, 1992,"圓柱形模具之薄板超塑性氣吹成形之力學解析及電腦模擬",中國航空太空學會第34屆學術研討會論文集, 949~956,台南市.

13. 黃永茂, 徐宏修,李弘仁, 1992,"複合板壓延之塑性不安定分析",中國機械工程學會第九屆全國學術研討會論文集, 15~22,高雄市.

14. Y.M. Hwang and G.Y. Tzou, 1992, "An Analytical Approach to Asymmetrical Cold Strip Rolling by Slab Method", Proceeding, the 9th National Conference of CSME, 23~30, Kaohsiung, Taiwan, R.O.C.

15. 黃永茂, 徐宏修,李弘仁, 1992,"應用流線函數法於複合板壓延解析之研究",中華民國第十六屆全國力學會議論文集, 557~564,基隆市.

16. Y.M. Hwang and H. H. Hsu, 1993, "Analysis on Sandwich Sheets Rolling", 4th International Conference on the Technology of Plasticity, 796~801, Beijing, China.

17. 黃永茂, 廖金木,楊建興, 1993,"超塑性氣吹成形之研究;第二報(等應變率及等壓力下入模角對氣吹成形之影響)",中國航空太空學會第35屆學術研討會論文集, 475~484,中壢市.

18. 黃永茂,李弘仁, 1993,"多層板複合壓延之研究;第二報(三層板冷間複合壓延之實驗)",中國機械工程學會第十屆全國學術研討會論文集, 547~555,新竹市.

19. Y.M. Hwang and J.M. Liew, 1993," Analysis and Computer Simulation on Superplastic Forming of Thin Sheet for Blow Forming in Circular Close-Die," Proceeding, Pacific International Conference on Aerospace Science and Technology, 621~628, Tainan, Taiwan.

20. 黃永茂, 蔡迎慶, 1993,"應用流線函數法於複合材擠製加工之解析",中華民國第十七屆全國力學會議論文集, 1055~1062, 台北市.

21. 黃永茂, 陳騰輝, 1993,"應用流線函數法於板材非對稱壓延之解析",中華民國第十七屆全國力學會議論文集, 1063~1069,台北市.

22. 黃永茂, 楊建興,1994,"圓柱形模具之超塑性氣吹成形之研究", 超塑性氣吹成形與擴散接合學術研討會論文集, 248~260, 台北市.

23. G.Y. Tzou and Y.M. Hwang, 1994, "An Analytical Approach to Asymmetrical Strip Rolling under Consideration of Hybrid Friction", Proceeding, the 11th National Conference of CSME, 141~149, Taichung, Taiwan, R.O.C.

24. 黃永茂, 黃德福, 1994,"任意模具形狀之擠製加工之解析",中國機械工程學會第十一屆全國學術研討會論文集, 363~369,台中市.

25. 黃永茂, 陳進和, 1994,"複合化壓著壓延過程中結合行為之探討",中國機械工程學會第十一屆全國學術研討會論文集, 469~476, 台中市.

26. 黃永茂,楊建興, 1994,"超塑性氣吹成形之研究;第三報(均一變形與非均一變形模式之比較)",中國航空太空學會第36屆學術研討會論文集, 821~828, 新竹市.

27. G.Y. Tzou and Y.M. Hwang, 1994, "Analysis of Asymmetrical Cold Rolling of Clad Sheet", The 18th National Conference on Theoretical and Applied Mechanics, 163~172, Hsinchu, Taiwan, R.O.C.

28. 黃永茂,蔡迎慶, 1994,"複合材擠製加工之解析",中華民國第十八屆全國力學會議論文集, 173~180, 新竹市.

29. 黃永茂, 陳騰輝, 徐宏修, 1994,"非對稱複合壓延之解析",中華民國第十八屆全國力學會議論文集, 181~186,新竹市.

30. Y.M. Hwang and T.H. Chen, 1995, "Study on Asymmetrical Complex Rolling of Clad Sheet," Proceedings of the Fourth International Conference on Computational Plasticity - Fundamentals and Applications, 1435~1446, Barcelona, Spain.

31. 黃永茂, 黃德福, 1995,"曲線模之軸對稱擠製加工之解析",中國機械工程學會第十二屆全國學術研討會論文集, 417~422, 嘉義縣.

32. G.Y. Tzou and Y.M. Hwang, 1995, "Theoretical and Experimental Analysis in Asymmetrical Strip Rolling", Proceeding, the 12th National Conference of CSME, 367~375, Chia-Yi, Taiwan, R.O.C.

33. 李毓傑, 張明湖, 吳學鑑, 黃永茂, 陳鴻賓, 1995,"行星式三滾輪高縮減軋延機軋延製程之彈塑性有限元素法分析",中國機械工程學會第十二屆全國學術研討會論文集, 329~338, 嘉義縣.

34. 黃永茂, 張文龍, 吳學鑑,陳鴻賓, 1995,"行星式三滾輪壓延製程之解析‧第一報–壓延荷重及扭力之估算–",中華民國第十九屆全國力學會議論文集, 165~170,桃園縣.

35. 黃永茂, 徐宏修, 1995,"應用流線函數法於壓延加工之研究‧第六報–單層板非對稱壓延速度場之修正–",中華民國第十九屆全國力學會議論文集, 171~178, 桃園縣.

36. G.Y. Tzou and Y.M. Hwang, 1995, "Study on Asymmetrical Cold and Hot Rolling of Clad Sheet Using the Slab Method", The 19th National Conference on Theoretical and Applied Mechanics, 207~216, Taoyuan, Taiwan, R.O.C.

37. 黃永茂, 楊建興, 陳宗榮, 黃志青, 1995,"超塑性氣吹成形之研究;第四報(圓柱形模具下板材之非均一變形模式之解析及實驗)",中國航空太空學會第37屆學術研討會論文集, 813~822,台北.

38. 黃永茂, 楊建興, 1995,"超塑性氣吹成形之研究;第五報(圓錐形模具之超塑性氣吹成形之解析)",中國航空太空學會第37屆學術研討會論文集, 823~831, 台北.

39. Y.M. Hwang and Y.C.Tsai, 1996, "Study on Hydrostatic Extrusion of Composite Rods ," 5th International Conference on the Technology of Plasticity, 217-220, Columbus, Ohio, U.S.A.

40. G.Y. Tzou and Y.M. Hwang, 1996, "Analysis and Experiment on Asymmetrical Sheet Rolling," 5th International Conference on the Technology of Plasticity, 83-86, Columbus, Ohio, U.S.A.

41. Y.M. Hwang and  H.H. Hsu, 1996, "A Three Dimensional Analysis of Plate Rolling," Proceeding, the 13th National Conference of CSME, 619~627, Taipei, Taiwan, R.O.C.

42. 黃永茂, 沈政昌, 黃德福, 1996,"複合材擠製加工之塑性不安定之研究",中華民國第二十屆全國力學會議論文集,Vol.II, 261~266, 台北市.

43. Y.M. Hwang, T.F. Hwang and J.C. Sheen, 1997, "Analysis of Plastic instability During Composite Rod Extrusion," Proceedings of Plasticity’97: The 6th International Symposium on Plasticity and Its Current Applications, 393-394, Juneau, Alaska, U.S.A.

44. Y.M. Hwang and  H.H. Hsu, 1997, "Analysis and Experiment on Plate Rolling," Proceeding, the 14th National Conference of CSME, 16~23, Taoyuan, Taiwan, R.O.C.

45. 黃永茂, 黃德福, 1997,"複合板之平面應變擠製加工之解析",中國機械工程學會第十四屆全國學術研討會論文集, 24~27, 桃園縣.

46. Y.M. Hwang and J. R. Chen, 1998, "Study on Shape Rolling of V-sectioned Sheet," Proceedings, the 7th International Conference on Steel Rolling, Nov., 9-11, 1998, 375-380, Makuhari, Chiba, Japan.

47. 黃永茂, 徐宏修,黃玉麟, 1998,"三層板冷間壓著壓延之解析與實驗",中國機械工程學會第十五屆全國學術研討會論文集, 219-226, 臺南市.

48. 黃永茂, 林宏俊, 1998,"應用流線函數法於異形材壓延加工之研究",中國機械工程學會第十五屆全國學術研討會論文集, 227-234, 臺南市.

49. 黃永茂, 陳狄成, 1998,"應用有限元素套裝軟體於非對稱板材壓延加工之模擬",中華民國第二十二屆全國力學會議論文集,Vol.II, 439~445,臺南市.

50. 黃永茂, 蔡文銘, 1998,"行星式三滾輪壓延製程之研究‧第二報–滾輪形狀對成品螺紋影響之實驗探討–",中華民國第二十二屆全國力學會議論文集,Vol.II, 447~452, 臺南市.

51. Y.M. Hwang and D.C. Chen, 1999,"Analysis of Closing Behavior of Internal Void in Sheet Rolling by the Finite Element Method", The 23th National Conference on Theoretical and Applied Mechanics, Vol.III, 63~70, Hsinchu, Taiwan, R.O.C.

52.蔡豐旭, 黃永茂, 2000,"行星式三滾輪壓延製程之研究‧第三報–行星式三滾輪壓延加工之有限元素解析–",中華民國第二十四屆全國力學會議論文集,M78~M85, 桃園縣.

53.許燕忠, 黃永茂, 2000," H型異型材壓延加工之有限元素解析",中華民國第二十四屆全國力學會議論文集,M86~M90, 桃園縣.

54. Y.M. Hwang, J.S. Yang, H.S. Lay and J.C. Huang, 2000, "Analysis on Superplastic Blow-Forming of 8090 Al-Li Sheets in Axisymmetrical and Rectangular Closed-Dies," THERMEC'2000 - Proceedings International Conference on Processing and Manufacturing of Advanced Materials, Las Vegas, USA, December 2000:CDROM, Section G1, Vol 117/3 "Special Issue:Journal of Materials Processing Technology, Eds. T.Chandra, K Higashi, C.Suryanarayana & C.Tome, Elsevier Science, UK (October 2001)

55. D.C. Chen and Y.M. Hwang, 2000, "Finite Element Simulations on Sheet Rolling with Inclusions Inside the Sheet," Proceeding, the 17th National Conference of CSME, 277~284, Kaohsiung, Taiwan, R.O.C.

56.許燕忠, 黃永茂, 陳狄成, 2000,"T型異型材壓延加工之有限元素解析",中國機械工程學會第十七屆全國學術研討會論文集, 285~291, 高雄市.

57. Y.M. Hwang and T. Altan, 2001, "FE Simulations on Tube Hydroforming in Square and Rectangular Dies," Proceedings, International Conference on Numerical Methods in Industrial Forming Processes, 879-884, Toyahashi, Japan.

58. Y.M. Hwang and T. Altan, 2001, "FE Simulations on Hydroforming and Crushing Circular tubes into Square Cross-sections," Proceedings, International Conference on Avanced Materials Processing Technologies (AMPT’01), Volume II, 815-822, Madrid, Spain.

59. Y.K. Lin, C.C. Huang and Y.M. Hwang, 2001, "Analysis on Tube Bulge Hydroforming Process with Consideration of Ellipsoidal Tube Surface," Proceedings, International Conference on Avanced Materials Processing Technologies (AMPT’01), Volume II, 931-937, Madrid, Spain.

60. Y.M. Hwang, Y.K. Lin, H.C. Wu, and H.C. Chen, 2001, "FE-Simulations on T-shape Tube Hydroforming," Proceeding, the 18th National Conference of CSME, 311~314, Taipei, Taiwan, R.O.C.

61.陳賀振, 黃永茂, 2001,"螺旋形散熱片擠製之有限元素分析",中國機械工程學會第十八屆全國學術研討會論文集, 259~264, 台北市.

62. Y.M. Hwang and D.C. Chen, 2001,"FE-simulations on Void Closure Behavior and Stress-strain Distributions Around Internal Void Inside the Sheet During Sheet Rolling Processes", The 25th National Conference on Theoretical and Applied Mechanics, 2533~2543, Taichung, Taiwan, R.O.C.

63. 黃永茂, 陳文智, 2001,"圓管鼓脹成形於方形及長方形模具之解析及有限元素模擬",中華民國第二十五屆全國力學會議論文集, 2427-2436, 台中市.

64. Y.M. Hwang and T. Altan, 2002, "FE-Simulations on Crushing and Preforming a Circular Tube into a Rectangular Cross-section," Advanced Technology of Plasticity, Vol.2, Proceedings of the 7th International Conference on Technology of Plasticity, 1513-1518, Yokohama, Japan.

65. 黃永茂, 唐毅君, 胡華良, 2002,"使用塑性黏土之三滾行星式壓延實驗 ",中國機械工程學會第十九屆全國學術研討會論文集, Vol.4, 359~365, 台灣雲林虎尾.

66. 黃永茂, 蔡錦文, 林義凱, 2002,"管件液壓鼓脹成形試驗機之製作及其實驗─管件液壓成形之研究．第一報─",中國機械工程學會第十九屆全國學術研討會論文集, Vol.4, 367~374, 台灣雲林虎尾.

67. D.C. Chen and Y.M. Hwang, 2002," Study on Void Generation and Development Around Inclusions Inside the Sheet During Sheet Rolling Processes ", Proceedings, the 19th National Conference of CSME, Vol.3, C2-011, Hu-Wei, Taiwan.

68. 黃永茂, 陳賀振, 黃柏策, 2002," CPU散熱片擠製之模具設計及有限元素分析",中華民國第二十六屆全國力學會議論文集, M017, 雲林縣.

69. 黃永茂, 陳文智, 林義凱, 2002,"管材於方形模具內液壓膨脹成形之解析與實驗- 管材液壓成形之研究•第二報 - ",中華民國第二十六屆全國力學會議論文集,M018, 雲林縣.

70. 黃永茂, 陳明發, 陳昭榮, 陳賀振, 2002," 使用塑性黏土之異型材擠製實驗",中華民國第二十六屆全國力學會議論文集, M028, 雲林縣.

71. 陳彰偉, 黃永茂, 王之佑, 2002," 液晶顯示器面板與驅動器結合機構之有限元素分析",中華民國第二十六屆全國力學會議論文集, P017, 雲林縣.

72. Y.M. Hwang and W.C. Chen, 2003, " Analysis of Tube Hydroforming in a square Cross-sectional Die," Proceedings of Plasticity’03: The 10th International Symposium on Plasticity and Its Current Applications, 376-378, Quebec city, Quebec, Canada.

73. Y.M. Hwang, 2003, "Process Fusion: Tube Hydroforming and Crushing,” International Workshop on Tube Hydroforming, Proceedings of the TUBEHYDRO2003, pp.105-110, September 16-17, Aichi, Japan.

74. 黃永茂, 王之佑, 李人傑, 林子權, 2003, "管件液壓成形試驗機之設計與製作-管材液壓成形之研究•第四報",第三屆精密機械製造研討會論文集, 613-620, 高雄市.

75. 潘正堂, 謝志瑋, 吳宗典, 黃永茂, 2003, "振動式自主性微發電機之振動薄膜研究",第三屆精密機械製造研討會論文集, 213-220, 高雄市.

76. 黃永茂, 林瑞彰, 林義凱, 2003," 管材之成形極限研究–管材液壓成形之研究．第三報–",中國機械工程學會第二十屆全國學術研討會論文集, Vol.4, 247-254, 台北市.

77. R.J. Li, Y.M. Hwang, I.R. Horng, J.Y. Wang, and R.H. Zheng, 2003, "Hybrid Fuzzy PID Controller for Tube-Hydroforming Processes via Genetic Algorithms," Proceedings, the 20th National Conference of CSME, Vol.4, 223-230, Taipei.

78. 黃永茂, 吳宏振, 陳秉鴻, 2003, "T形管件液壓成形之自適性模擬",中華民國第二十七屆全國力學會議論文集, 981-988, 台南市.

79. 黃永茂, 林星佑, 吳棋裕, 2003, "擠製製程時中央破裂缺陷形成之研究",中華民國第二十七屆全國力學會議論文集, 1124-1132, 台南市.

80. Y.T. Liu, Y.M. Hwang, B.T. Huang, N. Nishioki and T. Higuchi, 2003, "Testing of a Piezoelectric XY Stage Utilizing Bellow-Type Flexure Hinges,” Proceedings of the 7th International Conference on Mechatronics Technology, pp.325-330, December 2-6, Taipei.

81.黃永茂、林義凱、莊志宇, 2003, "管材之鼓脹實驗及塑流應力之求得,“ 中華民國鍛造會議,Vol.12, No.4, 6-13.

82. 潘正堂, 謝志瑋, 黃永茂, 2004, "雙棱鏡UV雷射製作高深寬比矽基結構",第二屆精密機械與製造技術研討會論文集, 121-126, 屏東縣.

83. C. T. Pan, Y.M. Hwang and M. F. Chen, 2004, "Application to Nano-imprinting Process via Electron Beam Optical Disk Mastering System," Proceedings of the 2nd Conference on precision Machinery and Manufacturing Technology, 127-132, Ping-Tong.

84. H.H. Hsu, G.Y. Tzou, Y.M. Hwang and H.L. Hu, 2004, "A Numerical Simulation on Friction Stir Process of Aluminum Alloy by Finite Element Method," Proceedings of the Eleventh International Conference on Machine Design and Production, 217-230, Turkey.

85.黃永茂, 黃力上, 張文展, 2004," 管件液壓成形時之摩擦試驗–管材液壓成形之研究．第五報–",中國機械工程學會第二十一屆全國學術研討會論文集, 2223-2228, 高雄市.

86. 黃永茂, 吳琪裕, 2004," CPU散熱片擠製模鰭部之彈性挫曲分析–CPU散熱片擠製加工之研究．第一報–",中國機械工程學會第二十一屆全國學術研討會論文集, 2293-2298, 高雄市.

87. 黃永茂, 侯志龍, 2004," CPU散熱片擠製模具之設計-CPU散熱片擠製加工之研究‧第二報–",中國機械工程學會第二十一屆全國學術研討會論文集, 4033-4038, 高雄市.

88. 黃永茂, 陳秉鴻, 2004," T形管件液壓成形之自適性模擬–管材液壓成形之研究‧第六報–",中國機械工程學會第二十一屆全國學術研討會論文集, 4039-4044, 高雄市.

89. 黃永茂, 陳秉鍵,林義凱, 2004," 不鏽鋼及碳鋼管材之材料特性探討–管材液壓成形之研究‧第七報–",中國機械工程學會第二十一屆全國學術研討會論文集, 4063-4068, 高雄市.

90. C. T. Pan, C. W. Hsieh, Y.M. Hwang, H.L. Hu, 2004, "Study on Silicon-Based Vibrational Microstructure," Proceedings, the 21th National Conference of CSME, 5329-5334, Haohsiung.

91. C.T. Pan, Y.M. Hwang, M.F. Chen, M.C. Chou, 2004, "Fabrication of Non-gap Hexagonal Micro-lens Array for TFT-LCD ," Proceedings, the 21th National Conference of CSME, 6439-6444, Haohsiung.

92. C.T. Pan, T.D. Wu, H.L. Hu, Y.M. Hwang, H.C. Liu, S.C. Shen, 2004, "Multipolar and multilayer rotatory micro-generator with perpendicular anisotropic magnetic film," Proceedings, the 21th National Conference of CSME, 6457-6462, Haohsiung.

93. 黃永茂, 陳明發, 邱昱瑋, 2004, "大型斷面材擠製加工之解析",中華民國第二十八屆全國力學會議論文集, 2625-2630, 台北市.

94. D.C. Chen and Y.M. Hwang, 2005, "Finite-Element Analyses of Deformation of a Complex Sheets Model Containing Voids," Proceedings of PLASTICITY’05: The 11st International Symposium on Plasticity and Its Current Applications, 91-93, Hawaii, USA.

95. Y.M. Hwang and Yi-Kai Lin, 2005, "Determination of Flow Stress Considering Material’s anisotropy by Hydraulic Bulge Test," Proceedings of the 3rd Conference on precision Machinery and Manufacturing Technology, 75-84, Ping-Tong.

96. Y.M. Hwang, G.I. Shin,Y.W. Chiou, and M.F. Chen, 2005, " Analysis of extrusion with large-scale cross sections," Proceedings of the 3rd Conference on precision Machinery and Manufacturing Technology, 257-262, Ping-Tong.

97. 黃永茂, 林子權, 張文展, 2005," 三通管件液壓成形機之試作與實驗",中國機械工程學會第二十二屆全國學術研討會論文集, C2, 625-630,中壢市.

98. 黃永茂, 潘正堂, 胡華良, 陳思廷, 2005," 微振動片之設計分析與製作",中國機械工程學會第二十二屆全國學術研討會論文集, E1, 95-100,中壢市.

99. H.H. Hsu and Y.M. Hwang, 2005, "Thermal Mechanical Modeling in Friction Stir Welding Using Finite Element Analysis," The 29th National Conference on Theoretical and Applied Mechanics, December, Hsinchu, Taiwan, R.O.C.

100. Y.M. Hwang, C.T. Pan and H.L. Hu, 2006, “Fabrication and Analysis of a Silicon-based Vibratory Micro-generator,” The 2nd International Meeting on Microsensors and Microsystems, p.189, 15-18 January 2006, Tainan, Taiwan.

101. Y.M. Hwang, Yi-Kai Lin and T. Altan, 2006, "Determination of flow stresses of aluminum tubes by hydraulic bulge tests," Proceedings of the North American Manufacturing Research Conference, NAMRC 34, 485-490, Milwaukee, Wisconsin, USA.

102. Y.M. Hwang, 2006, “Design of extrusion dies for manufacturing CPU heat sinks,” Precision Mold International Symposium, October 2006, Pinton, Taiwan.

103. 黃永茂, 張文展,林義凱,陳秉鍵, 2006,"溫間液壓鼓脹成形試驗機之試作與管材鼓脹成形實驗",中華民國鍛造會議, Vol.15, No.3,10-21,台中市. （鍛造技術論文佳作獎）

104. 黃永茂, 2006,"管件液壓成形技術之研究現況",先進材料成型技術產官學研技術研習會, No.4,1-10,屏東.

105. 黃永茂, 康宗瑋,邱源成,徐宏修, 2006,"摩擦攪拌銲接時試片溫度分佈之實驗探討",中國機械工程學會第二十三屆全國學術研討會論文集, D2-028, 13-18,台南市.

106. 黃永茂, 周培家 呂文隆, 2006, "低溫共燒陶瓷(LTCC)製程之熱應力分析",中華民國第三十屆全國力學會議論文集(光碟), J3-5, 彰化縣.

107. Y.M. Hwang, T.C. Lin and W.C. Chang, 2006, "Experiments on T-shape hydroforming with counter punch," Proceedings of the 7th Asia Pacific Conference on Materials Processing (APCMP 2006), 60-65, Singapore.

108. Y.M. Hwang and B.H. Chen, 2007, "Study on forming zones of loading paths during T-Shape tube hydroforming processes by adaptive simulations, Proceedings of the TUBEHYDRO2007, pp.109-114, June 4-5, Harbin, China.

109. Y.M. Hwang and B.J. Chen, 2007, "Evaluation of Flow Stresses of Tubular Materials Considering Material’s Anisotropy," Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM’07), 589-594, June 17-21, Porto, Portugal. (Keynote paper)

110. D.C. Chen, W.S. Gu and Y.M. Hwang, 2007, "Study of Titanium Alloy Sheet During H-sectioned Rolling Forming Using the Taguchi Method," Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM’07), 601-606, June 17-21, Porto, Portugal.

111. G.Y. Tzou, Y.M. Hwang, H.L. Hu, W.T. Chien and J.J. Hu, 2007, "Study on the Hemisphere Deep Drawing Process of Metal Sheet Based on the FEM Simulation," Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM’07), 649-654, June 17-21, Porto, Portugal.

112. Y.M. Hwang and C.Y. Shen, 2007, "ANALYSIS OF PLASTIC FLOW AND DIE DESIGN DURING EXTRUSION OF CPU HEAT SINKS”, Proceedings of the 10th Advances in Materials and Processing Technologies, pp. 401-410, Oct. 7-11, 2007, Daejeon, Korea.

113. Y.M. Hwang, 2007, "Recent Developments in Tube Hydroforming Technology," Proceedings of the 3rd International Symposium on Advanced Technology for Plasticity, 732-740, Oct. 17-20, Nanchang, China. (Plenary lecture)

114. 黃永茂, 王中韋, 莊漢傑, 2007,"鋅銅與碳鋼管材液壓鼓脹成形之分析",中國機械工程學會第二十四屆全國學術研討會論文集, D1-0043, 3336-3340,中壢市.

115. 黃永茂, 陳秉鍵, 蘇彥煌, 2007, "三軸式溫間液壓成形試驗機之設計與鎂管成形實驗",台灣鍛造會議論文集, A-4, 1-10,台中市.（鍛造技術論文佳作獎）

116. 黃永茂, 邱源成,范寶龍,林建華, 2007, "同種金屬之摩擦攪拌銲接之實驗",中華民國第三十一屆全國力學會議論文集(光碟), J5, 高雄縣.

117. 黃永茂, 陳思廷,潘正堂, 2007, "振動電磁式微發電機之發電特性研究",中華民國第三十一屆全國力學會議論文集(光碟), M2, 高雄縣.

118. 黃永茂, 莊漢傑, 2008,"鎂合金管材AZ61於溫間液壓鼓脹成形之研究",台灣鎂合金協會九十七年度會員大會及論文發表會論文集, 2-1-2, 83-88,台北市.

119. Y.M. Hwang and Y.K. Lin, 2008, "Forming limit diagrams of tubular materials by bulge tests," Proceedings of PLASTICITY’08: The 14th International Symposium on Plasticity and Its Current Applications, 34-36, Hawaii, USA. (Keynote lecture)

120. H.H. Hsu and Y.M. Hwang, 2008, "A Finite Element Simulation on friction stir welding of Bimetal," Proceedings of PLASTICITY’08: The 14th International Symposium on Plasticity and Its Current Applications, 31-33, Hawaii, USA.

121. 黃永茂、林宜宏, 2008, "3C產品鋁擠型加工之研究", 2008精密機械與製造技術研討會(PMMT2008)論文集, K01(01-09), 屏東縣. (Plenary lecture)

122. 黃德福、黃永茂、林俊佑, 2008, "金屬箔板壓延之力學解析", 2008精密機械與製造技術研討會(PMMT2008)論文集, C07(01-06), 屏東縣.

123. C.T. Pan, Y.M. Hwang, M.F. Chen, C.C. Lin,Y.C. Kan, 2008, "Optimization of geometric dimensions of an optical film with microlens array", 2008精密機械與製造技術研討會(PMMT2008)論文集, C62(01-05), 屏東縣.

124. Y.M. Hwang and C.W. Wang, 2008, "Flow stress evaluation of zinc copper and carbon steel tubes by hydraulic bulge tests considering their anisotropy," Proceedings of the 8th Asia Pacific Conference on Materials Processing (APCMP 2008), 970-975, Guilin-Guangzhou, China.

125. Y.M. Hwang, B.J. Chen, and Y.H. Su, 2008, "Tube hydroforming of magnesium alloys at elevated temperatures," Proceedings of the 9th International Conference on Technology of Plasticity (ICTP2008), pp.1264-1273, September 7 – 11, 2008, Gyeongju, Korea. (Invited keynote lecture)

126. Y.M. Hwang, P.L. Fan and C.H. Lin, 2008, "Experiments of friction stir welding of copper metals”, Proceedings of the 11th Advances in Materials and Processing Technologies (AMPT2008), p. 18, Nov. 2-5, 2008, Bahrain.

127. Y.M. Hwang, H.C. Chuang and B.J. Chen, 2008, "Hydraulic bulge tests of Magnesium tubes at elevated temperatures”, Proceedings of the 11th Advances in Materials and Processing Technologies (AMPT2008), p. 167, Nov. 2-5, 2008, Bahrain.

128. 黃永茂, 莊漢傑,王國興, 2008, "鎂合金AZ61管材之溫間液壓鼓脹成形性研究",台灣鍛造會議論文集, B-01, 1-15,台中市.

129. 黃永茂, 林宜宏,涂仕明, 2008, "3C空心產品鋁擠型加工之解析與實驗",台灣鍛造會議論文集, B-02, 1-8,台中市.（鍛造技術論文優等獎）

130. 鄒國益, 黃永茂, 鄧翔宇, 2008, "庫倫摩擦下已結合三層複合板材壓縮成形之有限元素模擬",中華民國第三十二屆全國力學會議論文集(光碟), J018, 嘉義縣.

131.黃永茂、黃德福、黃獻葳, 2009, "金屬超薄板壓延機前後方張力系統之設計與製作", 2009精密機械與製造技術研討會(PMMT2009)論文集, C69(01-06), 屏東縣.

132. 鄒國益、黃永茂、鄧翔宇, 2009, "六角螺帽電腦輔助設計與製程動態模擬", 2009精密機械與製造技術研討會(PMMT2009)論文集, E07(01-08), 屏東縣.

133. 黃永茂, 涂仕明, 2009,"鎂合金薄板熱間擠製之研究",台灣鎂合金協會九十八年度會員大會及論文發表會論文集, 2-1-2, 87-92,台北市.

134. Y.M. Hwang, H. C. Chuang and K. H. Wang, 2009, "Formability Study of Magnesium Alloy Tubes in Warm Hydraulic Bulge Tests,” Tube Hydroforming Technology, Proceedings of the 4th International Conference on Tube Hydroforming, pp.101-106, September 6-9, Kaohsiung, Taiwan.

135. Y.M. Hwang and J.M. Chen, 2009, "Analysis of surface-permeation and die design during rod extrusion processes”, Proceedings of the 12th Advances in Materials and Processing Technologies (AMPT2009), Paper ID 32, Oct. 26-29, 2009, Kuala Lumpur, Malaysia.

136. 黃永茂, 甘政川, 2009,"金屬箔板壓延時輥輪之彈性變形分析",中國機械工程學會第二十六屆全國學術研討會論文集, C01-012, 3336-3340,台南市.

137. 黃永茂, 涂仕明,林松秀, 2009, " 鎂合金薄板熱間擠製之塑流分析與製程開發",台灣鍛造會議論文集, A-06, 1-12,台中市.

138. 黃永茂、王國興、李世寶, 2010, "異形管液壓成形之有限元素分析", 2010精密機械與製造技術研討會(PMMT2010)論文集, C13(01-06), 屏東縣.

139. 黃永茂、林昱宏、黃玉麟, 2010, "無穿心小半徑拉彎成形之有限元素分析", 2010精密機械與製造技術研討會(PMMT2010)論文集, C14(01-07), 屏東縣.

140. 黃永茂、郭晉誠, 2010, "薄板熱壓時板寬變化之有限元素分析", 2010精密機械與製造技術研討會(PMMT2010)論文集, C15(01-06), 屏東縣.

141. Y.M. Hwang and S.M. Tu, 2010, "Analyses of Plastic Flow and Die Design During Hot Extrusion of Magnesium Alloy Strips," Proceedings of the 9th Asia Pacific Conference on Materials Processing (APCMP 2010), 98-103, Sydney, Australia.

142. 呂文隆、黃永茂, 2010, "可增加寬頻之振動電磁式發電微系統", 第14屆奈米工程研討會論文集, B06-03, 高雄市.

143. Y.M. Hwang, S.M. Tu and S.H. Lin, 2010, "Finite Element Analyses in Hot Extrusion of Magnesium Alloys," Proceedings of Intenational Symposium on Extrusion Process 2010, 43-49, Tokyo, Japan. (Invited lecture)

144. Y.M. Hwang and C.H. Lin, 2010, "Study on Friction Stir Welding of Dissimilar Metal Sheets," Proceedings of the 13th Internatinal Conference on Metal Forming, pp.1076-1079. September 19-22, Toyohashi, Japan.

145. Y.M. Hwang and C.C. Kan, 2010, "Roll shape design for foil rolling of a four-high mill”, Proceedings of the 12th Advances in Materials and Processing Technologies (AMPT2010), pp.587-592, Oct. 24-27, 2010, Paris, France.

146. Y.M. Hwang and S.H. Lin, S.M. Tu, 2010, "Plastic Flow Analyses and Process Development in Hot Extrusion of Magnesium Alloy Tubes”, Proceedings of the 5th Pan-Yellow Sea Rim International Symposium on Magnesium Alloys (YSR5), p.19, Nov. 16-18, 2010, Taipei, Taiwan.

147. 黃永茂, 林昱宏, 2010, "小彎曲半徑迴轉拉彎成形之有限元素分析與製程設計",台灣鍛造會議論文集, B-02, 1-13,台中市.

148. 黃永茂,黃楷能,洪國珍,2010,"螺絲拋光製程之螺絲變形有限元素分析",中國機械工程學會第二十七屆全國學術研討會論文集, D01-022, 211-216,台北市.

149. Y.M. Hwang, K.H. Wang and T.Y. Kuo, 2011, "Friction Tests in Magnesium Tube Hydroforming at Elevated Temperatures”, Proceedings of the 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), pp.1765-1769, April 27-29, 2011, Belfast, UK.

150. Y.M. Hwang, S.J. Huang and Y.S. Huang, 2011, "Manufacturing of SiCp Reinforced Magnesium Composite Tubes by Hot Extrusion Processes”, Proceedings of the 14th International ESAFORM Conference on Material Forming (ESAFORM 2011), pp.1644-1649, April 27-29, 2011, Belfast, UK.

151. Y.M. Hwang and K.H. Wang, 2011, "Recent Developments of Tube Hydroforming Technology", Proceedings of 2011 Conference on Precision Machinery and Manufacturing Technology - PMMT 2011, K01(1-9), Pintong, Taiwan. (Keynote lecture)

152. 黃永茂、林松秀, 2011, "鎂合金AZ31之中空正齒輪擠製模擬", 2011精密機械與製造技術研討會(PMMT2011)論文集, D08(1-8), 屏東縣.

153. 黃德福、黃永茂、徐明裕, 2011, "異型材四重式壓延機之開發", 2011精密機械與製造技術研討會(PMMT2011)論文集, D01(1-6), 屏東縣.

154. 黃永茂, 鄭友仁,黃慈慧,何漢誠, 2011,"AZ31鎂合金熱間擠製之微觀結構觀察與應變解析",台灣鎂合金協會一百年度會員大會及論文發表會論文集, 2-1-1, 69-74,台北市.

155. 黃崧任,黃永茂, 黃友聖,林柏州,劉彥辰, 2011,"AZ61添加SiCp之鎂基複合材料擠製管材的機械性質之研究",台灣鎂合金協會一百年度會員大會及論文發表會論文集, 1-1-5, 33-40,台北市. (特優論文獎)

156. Y.M. Hwang and P.K. Cheng, 2011, "Recent developments of tube hydroforming technology in Taiwan,” Tube Hydroforming Technology 2011, Proceedings of the 5th International Conference on Tube Hydroforming, pp.14-25, July 24-27, Nobori-betsu, Hokkaido, Japan. (Plenary lecture)

157. Y.M. Hwang, N.S. Kang and K.H. Wang, 2011, "T-shape Tube Hydroforming of Magnesium Alloys with Different Outlet Diameters,” Tube Hydroforming Technology 2011, Proceedings of the 5th International Conference on Tube Hydroforming, pp.80-83, July 24-27, Nobori-betsu, Hokkaido, Japan.

158. Y.M. Hwang, S.M. Tu and S.H. Lin, 2011, "Study on Hot Extrusion of Magnesium Alloy Thin Strips," Proceedings of the 10th International Conference on Technology of Plasticity (ICTP2011), pp.249-254, September 25 – 30, 2011, Aachen, Germany.

159. Y.M. Hwang, T.F. Hwang, C.Y. Lin and C.W. Su, 2011, "Development of a Four-High Foil Rolling Mill," Proceedings of the 10th International Conference on Technology of Plasticity (ICTP2011), pp.46-50, September 25 – 30, 2011, Aachen, Germany.

160. 黃永茂, 2011," Innovations and Applications of Tube Hydroforming Technology ",第九屆兩岸三地先進製造技術研討會, pp. 49-50,Oct. 17 – 21, 2011, 四川成都, 中國.

161. S. Alexandrov, Y.R. Jeng, Y.M. Hwang, 2011, "Formation of a Layer of Fine Grains in the Vicinity of Frictional Interfaces in Extrusion," Proceedings of International Symposium on Nano Science and Technology, pp.126-127, 18-19 November, 2011, Tainan, TAIWAN.

162. 黃永茂, 黃楷能,張家毓, 2011, "鎂合金螺絲打頭及輾牙成形之研究",台灣鍛造會議論文集, A9, 1-8,台中市. (鍛造技術論文優等獎)

163. 黃永茂,林松秀,張正男,2011,"鎂合金AZ31螺旋型材擠製之研究",中國機械工程學會第二十八屆全國學術研討會論文集, D01-064, 1-6,台中市.

164. Y.M. Hwang, K.H. Wang and Y.K. Lin, 2012, "Study on Hydroforming of Pre-bent Tubes," Proceedings of International Conference on Applications and Design in Mechanical Engineering (ICADME 2012), AM08, 1-7, Februry, 27 – 28, 2012, Penang, Malaysia.

165. L. Elena, S. Alexandrov, Y.R. Jeng, Y.M. Hwang, 2012, " Modelling of Damage Evolution in the Vicinity of Frictional Interfaces in Metal Forming," 4th International Conference on Advanced Manufacturing (ICAM2012), March 4- 8, 2012, Jiaoxi, Yilan County, Taiwan.

166. S. Alexandrov, Y.R. Jeng, Y.M. Hwang, 2012, "A narrow layer of fine grains near frictional interfaces in metal forming processes: Theory and experiment," Proceedings of 9th Taiwan/U.S. Air force nanoscience Workshop, p.41, April 16-20, 2012, Kenting, TAIWAN.

167. Y.M. Hwang , S. Alexandrov, Y.R. Jeng, T.H. Huang and O. B. Naimark, 2012, “Finite Element Analyses of Extrusion with a Two Stage Die and Manufacturing of Gradient Micro-Structures,” NSC-RFBF Taiwan-Russia Joint Symposium: Deformation and fracture in technological Processes, p.14. May 28 – 30, 2012, Moscow, Russia.

168. S.J. Huang, Y.M. Hwang and Y.S. Huang, 2012, “Grain Refinement of AZ61/SiCp Magnesium Matrix Composites for Tubes Extruded by Hot Extrusion Processes,” NSC-RFBF Taiwan-Russia Joint Symposium: Deformation and fracture in technological Processes, p.13. May 28 – 30, 2012, Moscow, Russia.

169. K. Manabe, H. Sato, K. Ito and Y.M. Hwang, 2012, “Development of micro sheet hydroforming device,” 2012 Japanese Spring conference for the Technology of Plasticity, pp.315-316. June 7 – 9, 2012, Komatsu, Japan. (In Japanese)

170. 黃德福、黃永茂、王國興、黃炬葦, 2012, " 應用鍛粗實驗材料性質進行模擬之探討", 2012精密機械與製造技術研討會(PMMT2012)論文集, D034(1-7), 屏東縣.

171. Y.M. Hwang and S.H. Lin, 2012, " Study of Hot Extrusion of Hollow Spur Gears of AZ31 Magnesium Alloys," Proceedings of the first International Conference on Metallic Materials and Processing (ICMMP 2012), p.13, July 8 – 11, 2012, Gold Coast, Australia.

172. E. Lyapunova, V. Chudinov, M. Sokovikov, S. Uvarov, O. Naimark, Y.M. Hwang, S. Alexandrov 2012, “Scaling properties of fracture surfaces of dynamically loaded aluminium alloy specimens,” IMPACT 2012, p.380-382. Oct. 24 – 26, 2012, Taipei, Taiwan.

173. S. Alexandrov, Y.R. Jeng, Y.M. Hwang, 2012, “A Narrow Layer of Fine Grains Near Frictional Interfaces in Metal Forming Processes: Theory and Experiment,” Joint International Conference of ISEM-ACEM-SEM-7th ISEM’12 (International Symposium on Advanced Science and Technology in Experimental Mechanics), 0106, pp.1-6, November 8 – 11, 2012, Taipei, Taiwan.

174. Y.M. Hwang, K. N. Hwang, C.Y. Chang, 2012, " Study on Heading and Thread-rolling Processes of Magnesium Alloy Screws," 11th Asia-Pacific Conference onEngineering Plasticity andits Application (AEPA 2012), Advances in Engineering Plasticity XI, pp.322-325, December 5 – 7, 2012, Singapore.

175. 黃永茂,張正男,陳昱,2012,"鎂合金中空螺旋管材熱間擠製之研究",中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號#1423, 1-6,高雄市.

176. 黃永茂, 張家毓, 陳柏維,2012,"鎂合金螺絲打頭製程之研究",中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號#1424, 1-6,高雄市.

177. 黃永茂, 蘇建文, 吳任凱,2012,"異形薄板壓延之變形機制探討",中國機械工程學會第二十九屆全國學術研討會論文集, 論文編號#1425, 1-7,高雄市.

178 黃永茂, 郭宗育, 李宗憲, 2012, "無模拉製成形之研究",台灣鍛造會議論文集, A-2, 1-8,台中市.

179. 鄒國益,黃永茂,鄧翔宇, 2012, "定剪摩擦下雙層複合板材精密衝孔之有限元素模擬",台灣鍛造會議論文集, B-1, 1-11,台中市.

180. Y.M. Hwang, 2012, "Development of hydroforming Technology and applications," International Conference on Advanced Sheet Metal Forming Technology and Applications, Dec. 18, 2012, Kaohsiung, Taiwan. (Invited lecture)

181. 小林　大, 陳　旭, 古島　剛, 真鍋健一, 黃永茂, 王國興, 2013, "ファジィ制御を用いたAZ61マグネシウム合金管のY字成形に関する研究", 第52回学生員卒業研究発表講演会論文集, pp.571-572,東京都八王子市(首都大学東京　南大沢校區) 3月.

182. Y.M. Hwang, N.S. Kang and K.H. Wang, 2013, "Adaptive Simulations in T-Shape Tube Hydroforming with Different Outlet Diameters,” Tube Hydroforming Technology 2013, Proceedings of the 6th International Conference on Tube Hydroforming, pp.194-198, August 25-28, Jeju, Korea.

183. K. Manabe, D. Kobayashi, X. Chen, Y.M. Hwang and K.H. Wang, 2013, " Experimental Validation of Fuzzy Process Control of Y-shape Hydroforming for AZ61 Magnesium Alloy Tube,” Tube Hydroforming Technology 2013, Proceedings of the 6th International Conference on Tube Hydroforming, pp.199-203, August 25-28, Jeju, Korea.

184. Y.M. Hwang and J.C. Kao, 2013, " Width Spread Analysis in Sheet Rolling”, Proceedings of the 16th Advances in Materials and Processing Technologies (AMPT2013), S2-1, September 22-26, 2013, Taipei, Taiwan.

185. G.Y. Tzou, Y.M. Hwang and H.Y. Teng, 2013, " FEM Simulation on Rotating Piercing Process With Constant Shear Friction”, Proceedings of the 16th Advances in Materials and Processing Technologies (AMPT2013), S2-6, September 22-26, 2013, Taipei, Taiwan.

186. K. Manabe, D. Kobayashi, X. Chen, Y.M. Hwang and K.H. Wang, 2013, “Experimental validation of Y-shape tube hydroforming fuzzy process control,” Proceedings of the 64th Japanese Joint conference for the Technology of Plasticity, pp.59-60. November 1 – 3, 2013, Osaka, Japan. (In Japanese)

187. 黃永茂, 王國興,陳溪鎔, 2013, "鋁合金熱間壓延時製程參數對板材溫度之影響 ",台灣鍛造會議論文集, B-4, 1-11,台中市.

188. 黃永茂, 陳柏維, 2013, "鈦金屬螺絲打頭製程之模擬分析",台灣鍛造會議論文集, A-2, 1-7,台中市.

189. 黃永茂, 陳柏維, 洪國珍, 2013, "內六角槽孔鎂合金螺絲打頭成形之模具與製程設計",台灣第一屆塑性加工研討會論文集, No.2, 高雄市.

190. 黃永茂, 陳  昱, 2013, "功能梯度管材之擠型模具設計",台灣第一屆塑性加工研討會論文集, No.15, 高雄市.

191. Y.M. Hwang, T.H. Huang, S. Alexandrov, O. B. Naimark, and Y.R. Jeng, 2014, "Manufacture of gradient micro-structures of magnesium alloys using two stage extrusion dies," AIP Conference (NUMISHEET 2014) Proceedings Vol. 1567, pp.1089-1092 (2013), January 6-10, 2014, Melbourne, Australia. (Keynote paper)

192. G.Y. Tzou, Y.M. Hwang, and H.Y. Teng, 2014, "FEM simulation on rotating piercing process of double-layer clad sheet with Coulomb friction," AIP Conference (NUMISHEET 2014) Proceedings Vol. 1567, pp.1085-1088 (2013), January 6-10, 2014, Melbourne, Australia.

193. C.P. Jiang, Y.M. Hwang, 2014, "Development of element subdivision method for modeling grain refinement mechanism in extrusion process," AIP Conference (NUMISHEET 2014) Proceedings Vol. 1567, pp.1123-1126 (2013), January 6-10, 2014, Melbourne, Australia.

194. Y.M. Hwang, Z.S. Li, T.Y. Lin, 2014, "Formability Discussion in Dieless Drawing of Stainless Steel Tubes," 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2014), p. 66, September 1-5, 2014, Kaohsiung, Taiwan.

195. G.Y. Tzou, Y.M. Hwang, S.C. Pan, 2014, "Experimental Investigation and FEM Simulation on Material Behaviors of Cylinder With the Rotating Flat Die," 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2014), p. 101, September 1-5, 2014, Kaohsiung, Taiwan.

196. G.Y. Tzou, Y.M. Hwang, H.Y. Teng, 2014, "Study on Rotating Compression Forming of Double-Layer Clad Ring Considering Constant Shear Friction," 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2014), p. 75, September 1-5, 2014, Kaohsiung, Taiwan.

197. Y.M. Hwang, S.Y. Hsieh, M.C. Chen, 2014, "Tube Hydroforming of Fuel Filler Pipes with Movable Dies," 12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2014), p. 88, September 1-5, 2014, Kaohsiung, Taiwan.

198. Y.M. Hwang, Y. Chen, K.S. Jhuang, 2014, "Extrusion Die Design for Tubes with Hardness Gradient," 5th International Conference on Advanced Manufacturing (ICAM2014), p. 34, September 30- October 3, 2014, Chiayi, Taiwan.

199. Y.M. Hwang, “Panel Discussions: Metal Forming / Rolling,” 5th International Conference on Advanced Manufacturing (ICAM2014), September 30- October 3, 2014, Chiayi, Taiwan. (Invited panelist)

200. Y.M. Hwang, “Summit Forum on Advanced Manufacturing, Title: Past, Present and Future Directions for Advanced Manufacturing,” 5th International Conference on Advanced Manufacturing (ICAM2014), September 30- October 3, 2014, Chiayi, Taiwan. (Invited panelist)

201. Y.M. Hwang, 2014, "Hot extrusion of helical tubes and spur gears of magnesium alloys," 2014 Beijing International Forum on Plastic Forming Technology, October 16- 18, 2014, Beijing, China. (Invited lecture)

202. Y.M. Hwang, C.N. Chang, 2014, "Hot extrusion of hollow helical tubes of magnesium alloys," Proceedings of the 11th International Conference on Technology of Plasticity (ICTP2014) Procedia Engineering, pp.2249-2254, October 19 – 24, 2014, Nagoya, Japan.

203. 黃永茂, 2014, "台灣塑性加工之未來展望", 台灣第二屆塑性加工研討會, 專題演講, 虎尾鎮，雲林縣. (Invited plenary lecture)

204. 黃永茂, 陳柏維,陳博鴻, 2014, "內六角槽孔鈦金屬螺絲打頭成形之模具與製程設計",台灣第二屆塑性加工研討會論文集, No.10, 虎尾鎮，雲林縣. (論文佳作)

205. 黃永茂, 范鴻仁,陳博鴻, 2014, "鎂合金螺絲成形之模具設計與分析",台灣第二屆塑性加工研討會論文集, No.23, 虎尾鎮，雲林縣. (論文佳作)

206. Y.M. Hwang, S.Y. Chiou, T.J. Tzeng, S.C. Wang, C.W. Lin, 2014, "Finite Element Simulations in Thermal Compression Bonding Processes of Copper Pillar Flip Chip Packages," Proceedings of the 7th Asia Workshop on Micro-Nano Forming Technology (AWMFT2014), T8, November 9-12, 2014, Taipei, Taiwan.

207. Y.M. Hwang, S.H. Lin, 2014, "Hot extrusion of hollow spure gear of magnesium alloys," Proceedings of the ASME 2014 International Mechanical Engineering Congress and Exposition IMECE2014-36315, pp.1-9, November 14-20, 2014, Montreal, Quebec, Canada.

208. 黃永茂, 吳任凱,陳禹齊, 2014, "矩形管之液壓複合成形之研究",台灣鍛造會議論文集, A-3, 1-8,台中市. （鍛造技術論文佳作獎）

209. 黃永茂, 陳炫翰,葉佐倫, 2014, "鎂合金熱間壓延之研究",台灣鍛造會議論文集, A-4, 1-7,台中市.

210. Y.M. Hwang, Tso-Lun Yeh, 2015, "Microstructure Prediction by Finite Element Analysis During Hot Rolling of Magnesium Alloy Sheets," Proceedings of the 1st International Conference on Precision Machinery and Manufacturing Technology (ICPMMT2015), No. 14, May 22–24, 2015, Kenting, Taiwan.

211. Y.M. Hwang, 2015, "Innovations and Applications of Tube Hydroforming Technology," 4th International Conference on Mechanical, Control, and Electronic Information (ICMCEI 2015), June 27–28, 2015, Fuzhou, China. (Keynote lecture)

212. Y.M. Hwang, Y.H. Lin, 2015, "Finite element analysis of hot aluminum extrusion of asymmetric parts," Proceedings of the 6th International Conference on Computational Methods (ICCM2015), No. 693, July 14–17, 2015, Auckland, New Zealand.

213. Y.M. Hwang, R.K. Wu, 2015, "Study of hydraulic compound forming of rectangular tubes,” Tube Hydroforming Technology 2015, Proceedings of the 7th International Conference on Tube Hydroforming, pp.38-45, September 09-11, Xian, China. (Invited paper)

214. Y.M. Hwang, S.Y. Chiou, T.J. Tzeng, S.C. Wang, C.W. Lin, 2015, "Finite Element Simulations in Thermal Compression Bonding Processes of Copper Pillar Flip Chip Packages," Proceedings of the 8th Asia Workshop on Micro-Nano Forming Technology (AWMFT2015), p.26, J5, October 14-17, 2015, Suwa, Japan.

215. 黃永茂, 2015, "鎂合金螺絲成形之模具設計與有限元素分析", 2015扣件產業技術研討會(CFIT 2015),專題演講, 高雄.

216. 黃永茂, 邱聖育,蘇偉宏,曾琮鍵,林智偉, 2015, "銅柱覆晶封裝製程之研究",台灣鍛造會議論文集, A-2, 1-11,台中市.

217. 黃永茂, 謝昕諺, 郭乃榮, 2015, "應用可移動式模具於管材大鼓脹液壓成形之研究",台灣鍛造會議論文集, B-4, 1-7,台中市.

218. Y.M. Hwang, K.H. Wang, S.R. Chen, 2015, "Study of Temperature History in Hot Rolling of AA5182 Aluminum Alloy," Proceedings of 24th International Symposium on processing and fabrication of advanced materials (PFAM XXIV), pp.533-542, Decmber 18-20, 2015, Osaka, Japan. (Invited paper)

219. Y.M. Hwang, C.Y. Chang, 2016, "Finite element analysis and die design of heading processes of magnesium alloy screws," Proceedings of the 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering (MOIME2016), pp.18-27, March 19-20, 2016, Bali, Indonesia.

220. Y.M. Hwang, Y. Chen and S. Alexandrov, 2016 “Manufacture of Magnesium Tubes with Gradient Hardness Distribution using a Two-stage Porthole Extrusion Die,” Proceedings of Metal Forming 2016, pp. 49-54, September 18-21, 2016, Krakow, Poland.

221. Y.M. Hwang, S.Y. Chiou, 2016, "Empirical Equations for Optimization Conditions in Thermal Compression Bonding of Copper Pillar Flip Chip Packages," Proceedings of the 9th Asia Workshop on Micro-Nano Forming Technology (AWMFT2016), p.16, October 27-30, 2016, Jinan, China. (Keynote lecture)

222. 黃永茂, 林德興,劉清良,王郁仁,郭冠緯, 2016, "彈簧預壓成形分析",第三屆台灣塑性加工研討會論文集, pp.80-85, 高雄市. (論文佳作)

223. 黃永茂, 林德興,林聖量, 2016, "矩形截面彈簧之幾何設計",第三屆台灣塑性加工研討會論文集, pp.86-91, 高雄市. (論文佳作)

224. 黃永茂, 戴煒翰,江念穎, 2016, "管件液壓沖孔加工之有限元素模擬與模具設計",第三屆台灣塑性加工研討會論文集, pp.98-103, 高雄市. (論文優等獎)

225. 黃永茂, 莊凱翔,余浩正, 2016, "應用旋轉壓縮成形於梯度微結構鎂合金材料之製作",第三屆台灣塑性加工研討會論文集, pp.136-141, 高雄市. (論文優等獎)

226. 鄒國益,黃永茂, 潘賽智, 2016, "定剪摩擦下以切片法與有限元素法於多孔性圓柱壓縮成形分析",第三屆台灣塑性加工研討會論文集, pp.122-128, 高雄市.

227. Y.M. Hwang, S.Y. Hsieh, N.J. Kuo, 2016, "Study of Large-expansion-ratio Tube Hydroforming with Movable Dies," 13th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2016), pp. 616-622, December 4-8, 2016, Hiroshima, Japan.

228. 黃永茂, 許家銘, 許翼鵬, 2016, "大徑薄壁鎂合金管材之熱間擠製之研究",台灣鍛造會議論文集, A-1, 1-10,台中市. (鍛造技術論文優等獎)

229. 黃永茂, 陳博鴻, 閻其暘, 2016, "植牙用鈦合金螺絲之打頭成形與製程設計",台灣鍛造會議論文集, B-2, 1-10,台中市.

230. Y.M. Hwang, Y.H. Lin, 2017, "Plastic Flow Analysis in Hot Aluminum Extrusion of Asymmetric Parts," 5th International Conference on Metallurgy Technology and Materials (ICMTM2017), M724, April 15-16, 2017, Xiamen, China.

231. Y.M. Hwang, T.H. Ou, and W.H. Su, 2017, "Warpage behavior analysis in package processes of embedded copper substrates," Proceedings of the 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT2017), No. 23, May 19–21, 2017, Kenting, Taiwan.

232. Gow-Yi Tzou, Y.M. Hwang, and S.C. Pan, 2017, "Comparisons of compression characteristics in compression forming of porous cylinder based on slab method and finite element method under constant shear friction," Proceedings of the 2nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT2017), No. 23, May 19–21, 2017, Kenting, Taiwan. DOI: 10.1051/matecconf/201712300002

233. Y.M. Hwang, C.M. Hsu, 2017, "Study on hot extrusion of large-diameter magnesium alloy thin tubes," The 2017 World Congress on Advances in Structureal Engineering and Mechanics (ASEM17), p. 30, August 28 – September 1, 2017, IIsan(Seoul), Korea.

234. Y.M. Hwang, Y.C. Chen, 2017, "Study of compound hydroforming of profiled tubes," Proceedings of the 12th International Conference on Technology of Plasticity (ICTP2017) Procedia Engineering, 207 (2017) 2328–2333, September 17 – 22, 2017, Cambrige, UK.

235. Y.M. Hwang, T.H. Ou, and W.H. Su, 2017, "Effects of Configurations of Copper Embedded Substrates on Warpage Behavior During Packaging Process," Proceedings of the 10th Asia Workshop on Micro-Nano Forming Technology (AWMFT2017), p.14, October 15-17, 2017, Pohand, Korea. (Keynote lecture)

236. Y.M. Hwang, F.K. Chen, H.W. Hu, C.Y. Chuang, 2017, "Recent developments of tube hydroforming technology in Taiwan,” Tube Hydroforming Technology 2017, Proceedings of the 8th International Conference on Tube Hydroforming, pp.10-24, November 14-17, 2017, Bangkok, Thailand. (Keynote paper)

237. Y.M. Hwang, K.S. Jhuang, and H.C. Yu, 2017, "Finite Element Simulation of Rotating Compression Forming,” 1st Asia Pacific Symposium on Technology of Plasticity (APSTP2017), A1013, p.2, November 22-25, 2017, Taichung, Taiwan.

238. Y.M. Hwang, D.S. Lin, and S.L. Lin, 2017, "Geometric Design of Rectangular Cross-sectional Springs,” 1st Asia Pacific Symposium on Technology of Plasticity(APSTP2017), A1048, p.18, November 22-25, 2017, Taichung, Taiwan.

239. 黃永茂、郭乃榮、江念穎, 2017, "非對稱大鼓脹鋁合金管件液壓成形之研究",第四屆台灣塑性加工研討會摘要集, 17410, p.16, 台中市.

240. 黃永茂、許家銘、許翼鵬, 2017, "大徑薄壁鎂合金管材熱間擠製之結合壓力探討",第四屆台灣塑性加工研討會摘要集, 17402, p.9, 台中市.

241. 黃永茂、郭冠緯、劉翰軒,2017, "高溫氧化層對純鈦無模抽製成形影響",台灣鍛造會議論文集, A-2, p.31,台中市.

242. Y.M. Hwang, G.W. Kuo, H.H. Liu, 2018, “High temperature oxidation behavior in dieless drawing of titanium alloy wires,” 17th International Conference on Metal Forming, Metal Forming 2018, pp. 294-301, 16-19 September 2018, Toyohashi, Japan.

243. Y.M. Hwang, W.C. Yang, G.W. Kuo, H.H. Liu and Z.D. Zheng, 2018, " Surface oxidation behavior in dieless drawing  of 304 stainless steel wires," Proceedings of the 11th Asia Workshop on Micro-Nano Forming Technology (AWMFT2018), p.31, Nov. 4-7, 2018, Yunlin, Taiwan.

244. 黃永茂、林聖量、許仲洲, 2018, "管端加工之有限元素分析及其製程設計",第五屆台灣塑性加工研討會摘要集, p.33, 雲林縣.

245. 黃永茂、許翼鵬、洪揚景, 2018, "多孔模鋁合金擠製模具設計與有限元素分析",第五屆台灣塑性加工研討會摘要集, p.34, 雲林縣.

246. 黃永茂, 江念穎, 范鴻仁, 2018,"平板上圓孔凸緣成形及螺帽鑲嵌之可行性分析",中國機械工程學會第三十五屆全國學術研討會論文集, pp.1366-1371,嘉義縣.

247. Y.M. Hwang, Y.L. Wang, 2018, "Microstructures and Mechanical Properties of Magnesium Alloy ZK60 Sheets after Multi-pass Hot Rolling," 14th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA2018), December 2-7, 2018, Jeju, Korea. (Keynote lecture)

248. 黃永茂、閻其暘、陳昱丞,2018, "應用高週波感應加熱於異種金屬摩擦焊接之研究", 台灣鍛造會議論文集, A-1, p.31,台中市.

249. Y.M. Hwang, 2019, "Die design and compound tube hydroforming," 2019 International Conference on Advances in Materials, Mechanical and Manufacturing (AMMM 2019), March 22-24, 2019, Beijing, China. (Keynote lecture)

250. Y.M. Hwang, S. L. Lin,  and Z. Z. Xu, 2019, "Finite Element Analysis of Tube End Forming and Process Design," Proceedings of the 4nd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT2019), p. 29, May 24–26 2019, Kenting, Taiwan.

251. Y.M. Hwang, and I.P. Hsu, 2019, "Study of Bonding Behavior at Welding Surface in Aluminum Alloy Tube Extrusion,” 2nd Asia Pacific Symposium on Technology of Plasticity (APSTP2019), p.38, July 31- August 3, 2019, Tokyo, Japan.

252. Y.M. Hwang, H.C. Yu and S.K. Yin, 2019, " Study of Hot Rotating Compression Forming of Aluminum Powder”, Proceedings of the 22th Advances in Materials and Processing Technologies (AMPT2019), WB1-4, October 20-24, 2019, Taipei, Taiwan.

253. 黃永茂, 陳喬宙,黃德福,姜智彬, 2019, "變速度曲線應用於下料之最佳化設計",第六屆台灣塑性加工研討會論文集, pp.101-106, 高雄市.

254. 黃永茂, 洪揚景, 林蔓茹, 2019, "六角不鏽鋼棒材抽製成形之有限元素分析",第六屆台灣塑性加工研討會論文集, pp.47-52, 高雄市.

255. 黃永茂, 劉翰軒, 汪郁庭, 2019, "鈦合金線材無模抽製之微觀組織預測",第六屆台灣塑性加工研討會論文集, pp.53-58, 高雄市. (論文優等獎)

256. Y.M. Hwang, H.P. Yu, C.C. Chen and C.P. Chiang, 2019, "Study of Friction Tests of Strips with Variant Relative speeds,” Tube Hydroforming Technology, Proceedings of the 9th International Conference on Tube Hydroforming, pp.178-183, November 18-21, Kaohsiung, Taiwan.

257. Y.M. Hwang and H.N. Pham, 2019, "Study of Hydro - Reaming and Flanging of Aluminum Tubes,” Tube Hydroforming Technology, Proceedings of the 9th International Conference on Tube Hydroforming, pp. 124-129, November 18-21, Kaohsiung, Taiwan.

258. Y.M. Hwang and Y.J. Tsai, 2019, "Loading Path Design of Tube Hydroforming Using Movable Dies,” Tube Hydroforming Technology, Proceedings of the 9th International Conference on Tube Hydroforming, pp.111-115, November 18-21, Kaohsiung, Taiwan.

259. 黃永茂、李昱民、尹聖凱, 2019,"熱風爐直筒部爐襯熱傳及熱應力分析",中國機械工程學會第三十六屆全國學術研討會論文集, C04-1,paper No. 22,台北市.

260. 黃永茂、許仲洲,2019, "管端非對稱高擴管率成形之製程設計", 台灣鍛造會議論文集, B-2, p.37,台中市.

261. Y.M. Hwang, Y.J Tsai, 2020, "Effects of flow stresses on loading path design in tube hydroforming using movable dies," the 2nd International Conference on Advances in Materials, Mechanical and Manufacturing (AMMM 2020), AM008-A, March 27-29, 2020, Singapore.

262. Y.M. Hwang, Y.M. Lee, 2020, “Thermal stress analysis of refractory linings in a hot blast stove,” Journal of Physics: Conference Series, 1633, 012075, the proceedings of MEIE2020, IOP Publishing doi:10.1088/1742-6596/1633/1/012075

263. 黃永茂、尹聖凱、蔡耘豪, 2020, "旋轉壓縮於金屬粉末成形之有限元素分析", 第七屆台灣塑性加工研討會論文集, pp.14 - 19, 高雄市.

264. 黃永茂、陳喬宙、林品辰, 2020, "金屬薄板之拉伸摩擦試驗", 第七屆台灣塑性加工研討會論文集, pp.46 - 51, 高雄市. (優秀論文獎)

265. 黃永茂、張宏誠、陳昱丞、王貫宇, 2020, "碳鋼板材矯直之有限元素分析", 第七屆台灣塑性加工研討會論文集, pp.95 -100, 高雄市.

266. 黃永茂、王柏云、陳琮翰, 2020, "圓形板材於引伸成形性的分析", 第七屆台灣塑性加工研討會論文集, pp.101 -106, 高雄市.

267. 黃永茂、汪郁庭, 2020, "鈦合金線材無模抽製時之線徑與加熱頻率對微觀組織的影響", 第七屆台灣塑性加工研討會論文集, pp.143 -147, 高雄市.

268. 黃永茂、蔡曜駿、張宸豪, 2020,"應用可移動式模具於異形波紋管之液壓成形製程",中國機械工程學會第三十七屆全國學術研討會論文集, Paper No. 61, pp. 2430-2435, 雲林縣.

269. 黃永茂、張宏誠、賴宗毅, 2020,"碳鋼板材矯直曲率與壓下量關係之有限元素分析",中國機械工程學會第三十七屆全國學術研討會論文集, Paper No. 355, pp.2662-2667, 雲林縣.

270. 黃永茂、林蔓茹、陳秉鍵,2020, "不鏽鋼棒材冷間抽製之有限元素分析", 台灣鍛造會議論文集, A-3, p. 20, 台中市.

271. 黃永茂、許仲洲、洪瑜彤,2020, "多道次管端擴管成形之最佳化分析", 台灣鍛造會議論文集, A-4, p. 21, 台中市.

272. Y.M. Hwang, M.R. Lin, B.C. Chen, H.S.R. Tsui, 2021, " Finite Element Analysis of Cold Drawing of Stainless Steel Bars," Proceedings of the 6th International Conference on Precision Machinery and Manufacturing Technology (ICPMMT2021), No. 38, May 21–23, 2021, Kenting, Taiwan.

273. 黃永茂、林蔓茹、陳秉鍵, 2021, "應用田口法於不鏽鋼棒材冷間抽製之有限元素分析", 2021精密機械與製造技術研討會(PMMT2021)論文集, F005(1-7), 屏東縣. (優等論文獎)

274. T. Kuboki, A. Shirayori, M. Mizumura, N. Utsumi, Y.M. Hwang, 2021, “Tube forming and fabricating technologies for contributing society by tackling problems of environment and aging population,” Proc. 13th Int. Conf. Techn. Plast. (ICTP2021), Vol. 2021, pp. 2883-2897, July 25-30, 2021 Ohio, USA. (Keynote lecture)

275. Y.M. Hwang, W.H. Dai, P.C. Lin, 2021, “Finite Element Simulation and Punch Design for Tube Hydro-Piercing,” Proc. 13th Int. Conf. Techn. Plast. (ICTP2021), Vol. 2021, pp. 2671-2682, July 25-30, 2021 Ohio, USA.

276. Y.M. Hwang, and H.S.R. Tsui, 2021, " Investigations on the effects of drawing conditions on the core ratios in cold drawing of composite rods,” 13th Asian Workshop on Micro/Nano Forming Technology (AWMFT2021) and The 3rd Asian Pacific Symposium on Technology of Plasticity (APSTP2021), November 3-6, 2021, Shanghai, China. (Best Paper Award)

277. Y.M. Hwang, Y.T. Wang and H.H. Liu, 2021, "Investigation of Formability and Microstructure of Titanium Alloy Wires During Dieless Drawing Processes,” International Symposium on Technology of Plasticity for Celebrating KSTP’S 30 Years Anniversary (IS-KSTP30), November 24-26, 2021, Busan, Korea. (Keynote lecture)

278. 黃永茂、賴宗毅、王貫宇, 2021, "碳鋼板材矯直加工之有限元素分析與急峻度探討", 第八屆台灣塑性加工研討會論文集, TSTP-002, 台北市. (最佳論文獎)

279. 黃永茂、林蔓茹、徐曉珊, 2021, "不鏽鋼棒材冷間抽製之模具與製程設計", 第八屆台灣塑性加工研討會論文集, TSTP-003, 台北市.

280. 黃永茂、林品辰, 2021, "傳統衝壓曲線與變速度伺服曲線對引伸加工結果的探討", 第八屆台灣塑性加工研討會論文集, TSTP-010, 台北市.

281. 黃永茂、賴宗毅、林芫慶, 2021, "碳鋼板材矯直之產品急峻度預測解析模式", 第八屆台灣塑性加工研討會論文集, TSTP-015, 台北市.

282. 黃永茂、汪郁庭、張雅婷,  2021, "無模抽製成形時冷卻速度對鈦合金線材微觀組織的影響",第八屆台灣塑性加工研討會論文集, TSTP-017, 台北市.

283. 黃永茂、蔡耘豪, 2021,"多孔性複合材料旋轉壓縮之有限元素分析",中國機械工程學會第三十八屆全國學術研討會論文集, C1-010, 台南市.

284. 黃永茂、張宸豪, 2021,"多節波紋管之液壓成形製程設計",中國機械工程學會第三十八屆全國學術研討會論文集, D11-007, 台南市.

285. 黃永茂、范鴻仁、何則緯,2021, "鋁管液壓沖邊成形及螺帽鑲嵌結合之沖頭設計", 台灣鍛造會議論文集, B-3, p. 38, 台中市.

286. 黃永茂、洪瑜彤,2021, "旋轉拉伸彎管夾持模具之設計與彎管成形分析", 台灣鍛造會議論文集, B-4, p. 39, 台中市.

287. Y.M. Hwang, Y.J. Tsai, H.N. Pham, 2022, "Recent Developments and Applications of Tube Hydroforming Technology", 7th International Conference on Precision Machinery and Manufacturing Technology - ICPMMT 2022, K001(1-15), Pintong, Taiwan. (Keynote lecture)

288. Y.M. Hwang, M.R. Lin, H.S.R. Tsui, 2022, "Finite Element Simulations and Experiments of Cold Drawing of Stainless Steel Rods", 7th International Conference on Precision Machinery and Manufacturing Technology - ICPMMT 2022, p. 18, Pintong, Taiwan.

289. Y.M. Hwang, S.K. Yin, 2022, "Study on rotating compression forming of porous materials", Proceedings of JSME International Conference on Materials and Processing 2022, Th-2D-3, Nov. 6–10, 2022, Okinawa, Japan.

290. 黃永茂、王郁仁、黃玉麟、張宸豪、陳嘉全, 2022,"波紋管液壓成形設備的機構設計",第25屆全國機構與機器設計學術研討會(CSMMT 2022)摘要集, 089, Nov. 12, 2022, 高雄市.

291. Y.M. Hwang, 2022, "Applications of Movable Dies in Tube Hydroforming Processes,” Proceedings of the 10th International Conference on Tube Hydroforming (TUBEHYDRO2022), pp.1-10, November 14-17, Matsue(Shimane), Japan. (Keynote lecture)

292. Y.M. Hwang, H.S.R. Tsui, 2022, "Study on the Tube Sinking Processes of Bimetallic Tubes,” Proceedings of the 10th International Conference on Tube Hydroforming (TUBEHYDRO2022), pp.248-251, November 14-17, Matsue(Shimane), Japan.

293. C.C. Chen, C.P. Jiang, Y.M. Hwang, H.S.R. Tsui, 2022, "Research on Hydraulic Bulging Forming of Small Diameter Metal Thin Tube,” Proceedings of the 10th International Conference on Tube Hydroforming (TUBEHYDRO2022), pp.141-148, Nov. 14-17, Matsue(Shimane), Japan.

294. 黃永茂、林冠達, 2022, "熱間成形時潤滑劑之摩擦係數評估", 第九屆台灣塑性加工研討會論文集, TSTP22-21, 高雄市.

295. 黃永茂、林芫慶, 2022, "矯直製程對於H型鋼之曲率與殘留應力分析", 第九屆台灣塑性加工研討會論文集, TSTP22-22, 高雄市.

296. 黃永茂、林品辰、何宗翰, 2022, "可變動衝壓曲線對深引伸成形與引薄成形之影響探討", 第九屆台灣塑性加工研討會論文集, TSTP22-10, 高雄市.

297. 黃永茂、范鴻仁、何則緯, 2022, "管材液壓沖邊成形及螺帽鑲嵌結合之有限元素分析", 第九屆台灣塑性加工研討會論文集, TSTP22-05, 高雄市.

298. 黃永茂、張宸豪、王郁仁、陳嘉全, 2022,"金屬波紋管之液壓成形製程設計",中國機械工程學會第三十九屆全國學術研討會論文集, D1-004, 苗栗縣.

299. 黃永茂、鍾志和, 2022,"彎管與液壓複合成形的有限元素分析",中國機械工程學會第三十九屆全國學術研討會論文集, D1-047, 苗栗縣.

300. 黃永茂、蔡耘豪、陳俊儒, 2022,"粉末充填環形試片之旋轉壓縮成形分析",中國機械工程學會第三十九屆全國學術研討會論文集, C1-001, 苗栗縣.

301. 黃永茂、洪瑜彤、范世宗、鍾志和,2022, "旋轉拉伸彎管成形時夾持模具的設計對彎管產品品質的影響", 台灣鍛造會議論文集, A-1, p. 33, 台中市.

302. 黃永茂、王貫宇、林芫慶,2022, "九輥矯直試驗機的設計與製作及板材矯直機制的分析", 台灣鍛造會議論文集, A-2, p. 34, 台中市.

瀏覽數: