跳到主要內容區

Top

研討會論文(莊婉君老師)

研討會論文

  1. W. C. Chuang*, K. L. Hsiao, Y. C. Lai, J. C. Li, W. H. Chao, "Motion detection and analysis of 90-degree wrist flexion training," International Conference on Mechatronic, Automobile, and Environment Engineering, Hualien, Taiwan, October 22-24, 2021.  Download
  2. 莊婉君*、 賴彥澄、 蕭冠倫、 李仁傑、 趙偉祥，腳踏車卷腹訓練動作之偵測與發電系統，第十六屆全國氫能與燃料電池學術研討會暨第八屆台灣能源學會年會(HEFC2021)，台南，台灣，九月，2021。Download
  3. 莊婉君*、蕭冠倫、趙偉祥，手腕屈曲六十度訓練動作偵測與分析，台灣機電工程國際學會第六屆全國學術研討會(ISME2021) ，桃園，台灣，五月，2021。Download
  4. 莊婉君*、蕭冠倫、趙偉祥，手腕運動之手部表皮應變探討與分析，台灣機電工程國際學會第六屆全國學術研討會(ISME2021)，桃園，台灣，五月，2021。Download
  5. 莊婉君*、賴彥澄、趙偉祥，捲腹運動動作分析與討論，台灣機電工程國際學會第六屆全國學術研討會(ISME2021)，桃園，台灣，五月，2021。Download
  6. 莊婉君*、賴彥澄、趙偉祥，仰臥起坐運動動作分析與討論，台灣機電工程國際學會第六屆全國學術研討會(ISME2021)，桃園，台灣，五月，2021。Download
  7.  W. C. Chuang*, Y. C. Chang and Y. C. Lai, "Development of the system for determining the mechanical properties of thin film," International Conference on Mechatronic, Automobile, and Environment Engineering, Kinmen, Taiwan, November 6-8th, 2020.  Download
  8. W. C. Chuang*, K. L. Hsiao, W. H. Chao and W. L. Chen, "Development of a real-time motion detection system," International Conference on Mechatronic, Automobile, and Environment Engineering, Kinmen, Taiwan, November 6-8th, 2020.  Download
  9. W. C. Chuang*, Y. C. Chan and P. H. Tseng, "Microstructure pull-in voltage extraction system," International Conference on Mechatronic, Automobile, and Environment Engineering, Kinmen, Taiwan, November 6-8th, 2020.  Download
  10. 莊婉君*、趙偉祥、陳威龍，手腕運動動作角度偵測系統，中華民國力學學會第四十四屆全國力學會議 (CTAM 2020)，宜蘭，台灣，十一月，2020。Download
  11. 莊婉君*、趙偉祥、張壹筌，微結構吸附電壓萃取系統，中華民國力學學會第四十四屆全國力學會議 (CTAM 2020)，宜蘭，台灣，十一月，2020。Download
  12. 莊婉君*、趙偉祥、陳威龍，隱形雷射後晶圓擴片之模型建立與探討，台灣機電工程國際學會第五屆全國學術研討會(ISME2020)，台中，台灣，八月，2020。Download
  13. 莊婉君*、趙偉祥、張壹筌，萃取薄膜材料之蒲松比系統開發，台灣機電工程國際學會第五屆全國學術研討會(ISME2020)，台中，台灣，八月，2020。Download
  14. W. C. Chuang*, W. L. Chen, "Important factors on the spacing between the dies after sd dicing tape expansion," 22nd International Conference on Materials, Methods and Technologies, Burgas, Bulgaria, June, 22-26th, 2020. Download
  15. W. C. Chuang*, W. L. Chen, C. F. Wang, "Flexible sensor module applied in sit up training exercises," 9th International Conference on Nanotechnology and Materials Science, Osaka, Japan, October, 14-16th, 2019. Download
  16. W. C. Chuang*, W. L. Chen, "Simulation model for single unit warpage of shadow moiré in flip-chip process," Conference of Computational Methods in Multi-scale, Multi-uncertainty and Multi-physics Problems, Porto, Portugal, July 15-17th, 2019. Download
  17. 莊婉君*、趙偉祥、陳威龍，潛艦匿聲推進技術評估及市場分析報告，台灣機電工程國際學會第四屆全國學術研討會(ISME2019)，高雄，台灣，二月，2019。Download 
  18. W. C. Chuang* and Y. C. Chang, " Empirical formula for estimating frequency of resonator with etched holes," 7th Nanotechnology and Material science, Frankfurt, Germany, November, 5-7th, 2018. Download
  19. W. C. Chuang* and K. Chen, "Analysis of the thermal deformation behavior for a fixed-fixed beam structure," International Conference on Mechatronic, Automobile, and Environment Engineering (ICMAEE), Chiang Mai, Thailand, July 7-9th, 2018. Download
  20. W. C. Chuang* and W. L. Chen, "Simulation model for strip warpage of molding process, " 5th Annual Conference on Engineering and Information Technology (ACEAIT), Kyoto, Japan, March 27-29th, 2018. Download
  21. 莊婉君*、陳楷，微型橋結構之熱變形分析與量測，台灣機電工程國際學會第一屆第三次年會暨全國學術研討會(ISME2018)，台南，台灣，二月，2018。 Download
  22. W. C. Chuang* and W. L. Chen, "Development of fabrication for flexible sensor applied to knee flexion and extension training," 33th Sensors and Actuators, Stockholm, Sweden, October 8-11th, 2017. Download
  23. W. C. Chuang*, W. L. Chen, B. Tsai, and J. Su, "Reliability of ball grid array subjected to temperature cycling," Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP’2017), Bordeaux, France, May, 29th - June, 1st, 2017. Download
  24. W. C. Chuang* and K. Chen, "Design of micro torsion-mirror and its electromechanical behavior," International Conference on Mechatronic, Automobile, and Environment Engineering, Yantai, China, May 27th - 29th 2017. Download
  25. W. C. Chuang* and K. Chen, "The key factor of pull-in voltage of micro torsion-mirror structure," International Conference on Mechatronic, Automobile, and Environment Engineering, Yantai, China, May 27th - 29th 2017. Download
  26. W. C. Chuang* and K. Chen, "Empirical formula about pull-in voltage of micro torsion-mirror, " International Conference on Mechatronic, Automobile, and Environment Engineering, Yantai, China, May 27th - 29th 2017. Download
  27. W. C. Chuang* and C. H. Kuo, ""Analysis for electro-mechanical behavior of a fixed-fixed beam with thermal deformation and undercut effect," Asian Conference on Engineering and Natural Sciences, Hokkaido, Japan, January 19th - 21st 2017. Download
  28. W. C. Chuang* and B. Y. Huang, "A real-time monitoring system for Knee Muscles Training," International Conference on Mechanical, Industrial and Power Engineering, Tokyo, Japan, December 6th - 8th 2016. Download
  29. W. C. Chuang*, " Analysis for the variation of resonant frequency of a micro clamped-clamped resonator with etching holes," International Conference on Design and Manufacturing Engineering (ICDME2016), Auckland, New Zealand, November 19-21, 2016. Downlaod
  30. W. C. Chuang* and W. L. Chen, Ben Tsai, Josh Su, "Analysis of wafer level chip scale package subjected to uniform pressure," 2nd International Conference on Computing and Precision Engineering, Kenting, Taiwan, Sep. 30th - Oct. 3th 2016. Download
  31. W. C. Chuang* and J. Y. Lin, "Empirical formula for pull-in voltage of fixed–fixed beam with elastic deformation," 1st International Conference on Engineering and Science, Yilan, Taiwan, July 8-10th 2016. Download
  32. W. C. Chuang*, W. L. Chen, B. Tsai, and R. Wu, " The trends of change of die gap control effect during the process of dicing wafer expanding," Design, Test, Integration& Packaging of MEMS/MOEMS (DTIP’2016), Budapest, Hungary, May, 30th - June, 2nd, 2016. Download
  33. 莊婉君*、黃任廷，具蝕刻孔之微結構電彈性分析及其於可調變共振器之應用研究，中國機械工程學會第三十二屆全國學術研討會(CSME32)，高雄，台灣，十二月，2015。 Download
  34. W. C. Chuang* and J. Y. Lin, " Analysis for pull-in voltage variations of fixed–fixed beam with elastic deformation in current input," World Congress on Advances in Structural Engineering and Mechanics (ASEM 2015), Incheon, Korea, Aug. 25-29, 2015. Download 
  35. W. C. Chuang*, W. H. Tu, G. S. Lin, J. Y. Hwang, and C. S. Lee, "Fracture mechanism analysis for stealth dicing applied in wafer expansion," Design, Test, Integration& Packaging of MEMS/MOEMS (DTIP'2015), Montpellier, France, April 27-30, 2015. Download
  36. 莊婉君*、戴聿，靜電式驅動之微鏡片扭轉行為研究，中國機械工程學會第三十一屆全國學術研討會(CSME31)，台中，台灣，十二月，2014。 Download
  37. W. C. Chuang* , J.Y. Lin, and J.C. Li, “Analysis of pull-in voltage variations in fixed–fixed beams with elastic deformation,” 2nd International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2014), Tainan, Taiwan, Oct. 31- Nov. 2, 2014.Download
  38. W. C. Chuang*, W. L. Chen, and H. T. Lin, “Optimized design of flexible strain sensor for stimulation of spinal muscles,” 2nd International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2014), Tainan, Taiwan, Oct. 31- Nov. 2, 2014.Download
  39. W. C. Chuang*, and Y. Dai, “Study on the electro-mechanical behavior of the micro torsion-mirror,” 2nd International Conference of Multi Disciplines of Engineering on Advanced Technology and Environmentalism Design (MDEATED 2014), Tainan, Taiwan, Oct. 31- Nov. 2, 2014. Download
  40. W. C. Chuang*, W. L. Chen, H. T. Lin, “Flexible strain sensor module applied on the activation of spinal muscle,” 1st International Electronic Conference on Sensors and Application, June 01-16, 2014. Download
  41. W. C. Chuang, and Y. R. Lin, " The robustness of an algorithm applied in wafer-level material property extraction," Design, Test, Integration & Packaging of MEMS/MOEMS (DTIP2014), Cannes, France, April 02-04, 2014. Download
  42. 莊婉君*、林育如，晶圓級薄膜材料性質演算法之穩健性探討，中國機械工程學會第三十屆全國學術研討會(CSME30)，宜蘭，台灣，十二月，2013。 Download
  43. 莊婉君*、陳威龍，應用於脊椎肌肉活化訓練之可撓感測器開發，中國機械工程學會第三十屆全國學術研討會(CSME30)，宜蘭，台灣，十二月，2013。Download
  44. 莊婉君*、胡毓忠、林大偉、吳保權、張培仁、李新立、王欽宏，CMOS製程相容之樑結構應力模擬分析技術，中國機械工程學會第二十九屆全國學術研討會(CSME29)，高雄，台灣，十二月，2012。Download
  45. W. C. Chu, W. C. Chuang, W. H. Tu, P. Z. Chang, and Y. C. Hu, "Etching holes effects for CMOS-MEMS capacitive structure," 22nd International Conference on Adaptive Structures and Technologies, paper no:078, Corfu–Greece, October 10-12, 2011. Download
  46. W. C. Chuang, Y. C. Hu, C. W. Wang et al., “A Fringing Capacitance Model for Electrostatic Microstructure,” 13th International Congress on Mesomechanics, Vicenza, Italy, 2011. Download
  47. W. C. Chuang, H. L. Lee, T. W. Lin, Y. C. Hu, P. Z. Chang, N. B. Ouyen, “Optimal residual stress in CMOS fabrication,” 34th National Conference on Theoretical and Applied Mechanics, Yunlin, Taiwan, Nov. 19-20, 2010. Download
  48. W. C. Chuang, H. L. Lee, Y. C. Hu et al., “Electromechanical coupling of CMOS-MEMS testkey for extracting material properties,” 1st IFToMM Asian Conference on Mechanism and Machine Science, Taipei, Taiwan, 2010. Download
  49. W. C. Chuang, C. W. Lin, Y. C. Hu et al., “An analytical model for optimizing LCD-cell design,” 12th International Congress on Mesomechanics, Taipei, Taiwan, 2010. Download

瀏覽數: