跳到主要內容區

Top

期刊論文(Journal Papers)(郭振坤老師)

SCI國際學術期刊論文

  1. U.R. Singh, S. Bhogilla, J.K. Kuo, “A novel thermally integrated high-temperature PEM fuel cell and absorption system for sustainable heating/cooling application.” International Journal of Hydrogen Energy, (2024), article in press. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (Times Cited: 0)
  2. J.K. Kuo, P. H. Huang, C. H. Lee, C. C. Cheng, “A molecular level-based parametric study on the capture of hydrogen sulfide and carbon oxides from flue gas mixtures using Au nanopores.” Molecular Simulation, (2024) 1-11, Published online: 25 Mar 2024. (SCI) (IF:2.1) (Q3, 22/35, Physics, Atomic, Molecular & Chemical) (first author) (Times Cited: 0)
  3. A. Wongcharoen, J.K. Kuo, P. Ackaradetruangsri, U. Thamma, "Influence of pin-perforation shape on thermohydraulic performance of circular pin-fin heat sinks under turbulent flow", Ain Shams Engineering Journal, Vol.15 (2024) 102667. (SCI) (IF:6) (Q1, 9/178, Engineering, Multidisciplinary) (Times Cited: 0)
  4. P.H. Huang, J.K. Kuo*, C.B. Wu, “Design and evaluation of dual passive hydrogen recovery subsystem for 10 kW PEMFC”, International Journal of Hydrogen Energy, Vol.54 (2024) 483-490. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 3)
  5. J.K. Kuo*, U. Thamma, A. Wongcharoen, Y.K. Chang, “Optimized fuzzy proportional integral controller for improving output power stability of active hydrogen recovery 10-kW PEM fuel cell system”, International Journal of Hydrogen Energy, Vol.50 (2024) 1080-1093. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 2)
  6. A. Mitra, H.Y. Kuo, J.H. Huang, G. Rachel, W.H. Chu, W.C. Chiu, J.K. Kuo, C.P. Liu, “Nano-Si for On-Demand H2 Production: Optimization of Yield and Real-Time Visualization of Si─H2O Reaction Using Liquid-Phase Transmission Electron Microscopy”, Small, (2023) 2307350, First published: 10 December 2023. (SCI) (IF:13.3) (Q1, 11/160, Physics, Applied) (Times Cited: 0)
  7. P.H. Huang, J.K. Kuo*, C.B. Wu, “Simulation and experimental measurements of 10-kW PEMFC passive hydrogen recovery system”, International Journal of Hydrogen Energy, Vol.48 (2023) 16790-16801. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 6)
  8. J.K. Kuo, P.R. Wu, T.F. Yang, W.M. Yan, “Optimal technical analysis of vacuum ejector for passive hydrogen recovery”, International Journal of Hydrogen Energy, Vol.48 (2023) 8260-8272. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (first author) (Times Cited: 3)
  9. J.K. Kuo, Yu-Ting Tsai, Pei-Hsing Huang*, Chien-Hui Lee, Chun-Hung Lin, “Adsorption and purification of biogas inside graphitic nanopores: molecular dynamics simulation approach”, Journal of Molecular Modeling, Vol.29 (2023) Article number: 40, 1-13. (SCI) (IF:2.2) (Q3, 120/230, Chemistry, Multidisciplinary) (first author) (Times Cited: 2)
  10. W.H. Chen, K.H. Chen, J.K. Kuo, A Saravanakumar, KW Chew, “Optimization analysis of hydrogen separation from an H2/CO2 gas mixture via a palladium membrane with a vacuum using response surface methodology”, International Journal of Hydrogen Energy, Vol.47 (2022) 42266-42279. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (Times Cited: 3)
  11. Y.K. Chih, Y.Q. Su, W.H. Chen, B.J. Lin, J.K. Kuo, S. You, H.P. Lin, “Optimization for hydrogen production from methanol partial oxidation over Ni-Cu/Al2O3 catalyst under sprays”, International Journal of Hydrogen Energy, Vol. 47 (2022) 40559-40572. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (Times Cited: 12)
  12. P.H. Huang, J.K. Kuo*, S.S. Chung, “Characteristic simulation and numerical investigation of membrane electrode assembly in proton exchange membrane fuel cell”, International Journal of Hydrogen Energy, Vol.47 (2022) 37577-37586. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 6)
  13. J.K. Kuo, J.J. Wu, P.H. Huang, C.Y. Cheng, “Inspection of sandblasting defect in investment castings by deep convolutional neural network”, The International Journal of Advanced Manufacturing Technology, Vol.120 (2022) 2457-2468. (SCI) (IF:3.4) (Q2, 29/65, Automation & Control Systems) (first author) (Times Cited: 6)
  14. J.K. Kuo*, C.Y. Hsieh, “Numerical investigation into effects of ejector geometry and operating conditions on hydrogen recirculation ratio in 80 kW PEM fuel cell system”, Energy, Vol.233 (2021) 121100. (SCI) (IF:9.0) (Q1, 3/62, Thermodynamics) (first author) (corresponding author) (Times Cited: 29)
  15. P.H. Huang, J.K. Kuo*, WZ Jiang, CB Wu, “Simulation analysis of hydrogen recirculation rates of fuel cells and the efficiency of combined heat and power”, International Journal of Hydrogen Energy, Vol.46 (2021) 16823-16835. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 21)
  16. J.K. Kuo, Y.T. Tsai, P.H. Huang, J.Y. Luo, “Capture of acidic gas molecules in metallic nanopillar array surfaces”, Journal of Molecular Modeling, Vol.27 (2021) 1-14. (SCI) (IF:2.2) (Q3, 120/230, Chemistry, Multidisciplinary) (first author) (Times Cited: 3)
  17. W.H. Chen*, Y.Q. Su, B.J. Lin, J.K. Kuo, P.C. Kuo, “Hydrogen production from partial oxidation and autothermal reforming of methanol from a cold start in sprays”, Fuel, Vol.287 (2021) 119638. (SCI) (IF:7.4) (Q1, 19/140, Engineering, Chemical) (Times Cited: 25)
  18. J.K. Kuo, P.H. Huang*, Y.T. Tsai, Z. Qi, C.S. Chou, “Optimal Design of Investment Casting System for a Stuffing Box with Pedestal of Centrifugal Pump: Computer Simulations and Experimental Verification”, The Journal of the Chinese Society of Mechanical Engineers, Vol.41 (2020) 551-563. (IF:0.2) (Q4, 135/135, Engineering, Mechanical) (first author) (Times Cited: 0)
  19. J.K. Kuo*, W.Z. Jiang, C.H. Li, T.H. Hus, “Numerical investigation into hydrogen supply stability and IV performance of PEM fuel cell system with passive Venturi ejector”, Applied Thermal Engineering, Vol.169 (2020) 114908. (SCI) (IF:6.4) (Q1, 9/135, Engineering, Mechanical) (first author) (corresponding author) (Times Cited: 38)
  20. J.K. Kuo*, H.C. Wei, “Numerical investigation into hydrogen content of reformate gas produced by methanol-water fuel mixtures in reforming”, International Journal of Energy Research, Vol.43 (2019) 4417-4426. (SCI) (IF:4.6) (Q1, 1/34, Nuclear Science & Technology) (first author) (corresponding author) (Times Cited: 1)
  21. J.K. Kuo*, J.Y. Huang, “Numerical and experimental investigation into clogging phenomenon in vaporizer coil of methanol steam reformers”, International Journal of Hydrogen Energy, Vol.44 (2019) 14456-14465. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 4)
  22. P.H. Huang, J.K. Kuo*, W.C. Tu, “Investigations into the evaporation efficiency and hydrogen production rate of methanol-water fuels in steam reformer tube”, Combustion Science and Technology, Vol.192 (2020) 1550-1566. (SCI) (IF:1.9) (Q3, 54/90, Engineering, Multidisciplinary) (corresponding author) (Times Cited: 3)
  23. J.K. Kuo, P.H. Huang, H.Y. Lai, W.J. Wu, “Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification”, The International Journal of Advanced Manufacturing Technology, Vol.100 (2019) 529-540. (SCI) (IF:3.4) (Q2, 29/65, Automation & Control Systems) (first author) (Times Cited: 13)
  24. J.K. Kuo, H.Y. Lai, P.H Huang, J.W. Jhan, “Dynamic ejection behavior of water molecules passing through a nano-aperture nozzle”, Molecular Simulation, Vol.44 (2018) 1469-1477. (SCI) (IF:2.1) (Q3, 22/35, Physics, Atomic, Molecular & Chemical) (first author) (Times Cited: 2)
  25. P.H. Huang, J.K Kuo*, S.J. Tsai, Y.C. Tsai, “Evaporation analysis of different fuels in evaporator coil of steam reformer for stationary PEM fuel cell systems”, Applied Thermal Engineering, Vol.128 (2018) 564-577. (SCI) (IF:6.4) (Q1, 9/135, Engineering, Mechanical) (corresponding author) (Times Cited: 19)
  26. J.K. Kuo, P.H. Huang, H.Y. Lai, J.R. Chen, “Optimal gating system design for investment casting of 17-4PH stainless steel enclosed impeller by numerical simulation and experimental verification”, The International Journal of Advanced Manufacturing Technology, Vol.92 (2017) 1093-1103. (SCI) (IF:3.4) (Q2, 29/65, Automation & Control Systems) (first author) (Times Cited: 41)
  27. J.K. Kuo, P.H. Huang*, M.J. Guo, “Removal of CrMo alloy steel components from investment casting gating system using vibration-excited fatigue failure”, The International Journal of Advanced Manufacturing Technology, Vol.89 (2017) 101-111. (SCI) (IF:3.4) (Q2, 29/65, Automation & Control Systems) (first author) (Times Cited: 24)
  28. P.H. Huang, J.K. Kuo*, C.Y. Han, “Numerical investigation into slope-climbing capability of fuel cell hybrid scooter”, Applied Thermal Engineering, Vol.110 (2017) 921-930. (SCI) (IF:6.4) (Q1, 9/135, Engineering, Mechanical) (corresponding author) (Times Cited: 11)
  29. J.K. Kuo, P.H. Huang*, T.H. Huang and J.Y. Luo, “Adsorption behaviors of hydrogen sulphide on Au(110) nanoslit array surfaces using molecular dynamics simulations”, Molecular Simulation, Vol.42 (2016) 1429-1436. (SCI) (IF:2.1) (Q3, 22/35, Physics, Atomic, Molecular & Chemical) (first author) (Times Cited: 9)
  30. P.H. Huang, J.K. Kuo*, Z.D. Wu, “Applying small wind turbines and a photovoltaic system to facilitate electrolysis hydrogen production”, International Journal of Hydrogen Energy, Vol.41 (2016) 8514-8524. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 44)
  31. P.H. Huang, J.K. Kuo*, C.Y. Huang, “A new application of the UltraBattery to hybrid fuel cell vehicles”, International Journal of Energy Research, Vol.40 (2016) 146-159. (SCI) (IF:4.6) (Q1, 1/34, Nuclear Science & Technology) (corresponding author) (Times Cited: 43)
  32. J.K. Kuo*, C.N. Huang, T.H. Lu, “Experimental investigation on heat transfer and pressure drop of ZnO/ethylene glycol-water nanofluids in transition”, Applied Thermal Engineering, Vol.93 (2016) 425-432. (SCI) (IF:6.4) (Q1, 9/135, Engineering, Mechanical) (first author) (corresponding author) (Times Cited: 10)
  33. J.J. Hwang, C.H. Lin, J.K. Kuo*, “Performance analysis of fuel cell thermoelectric cogeneration system with methanol steam reformer”, International Journal of Hydrogen Energy, Vol.39 (2014) 14448-14459. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 24)
  34. J.K. Kuo, P.H. Huang*, W.T. Wu, C.M. Lu, “Mechanical and fracture behaviors of defective silicon nanowires: combined effects of vacancy clusters, temperature, wire size, and shape”, Applied Physics A: Materials Science & Processing, Vol.114 (2014) 1247-1256. (SCI) (IF:2.7) (Q2, 77/159, Physics, Applied) (first author) (Times Cited: 23)
  35. J.K. Kuo, P.H. Huang, W.T. Wu, Y.C. Hsu, “Molecular dynamics investigations on the interfacial energy and adhesive strength between C60-filled carbon nanotubes and metallic surface”, Materials Chemistry and Physics, Vol.143 (2014) 873-880. (SCI) (IF:4.6) (Q2, 127/342, Materials Science, Multidisciplinary) (first author) (Times Cited: 6)
  36. P.H. Huang, J.K. Kuo*, Y.Y. Hsu, “Design and implementation of 8051 single-chip microcontroller for stationary 1.0 kW PEM fuel cell system”, Journal of Chemistry, Article ID 762954 (2014) 1-8. (SCI) (IF:3.0) (Q3, 92/178, Chemistry, Multidisciplinary) (corresponding author) (Times Cited: 1)
  37. J.K. Kuo*, H.K. Hsieh, “Research of flywheel system energy harvesting technology for fuel cell hybrid vehicles”, Fuel Cells, Vol. 13 (2013) 1234-1241. (SCI) (IF: 2.8) (Q3, 22/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 11)
  38. J.K. Kuo*, Y.-Y. Hsu, “An Intelligent Control Scheme for Prototype Stationary 1.0 kW PEM Fuel Cell System”, International Journal of Green Energy, Vol.10 (2013) 1086-1101. (SCI) (IF:3.3) (Q2, 21/62, Thermodynamics) (first author) (corresponding author) (Times Cited: 2)
  39. J.K. Kuo*, P.H. Huang, C.F. Wang, “Numerical modeling and analysis of PEMFC integrated with auxiliary power source”, International Journal of Energy Research, Vol.37 (2013) 1635-1633. (SCI) (IF:4.6) (Q1, 1/34, Nuclear Science & Technology) (first author) (corresponding author) (Times Cited: 3)
  40. J.K. Kuo, H.Y. Li, W.C. Weng, W.M. Yan, “Numerical investigation into transient response of proton exchange membrane fuel cell with serpentine flow field”, International Journal of Energy Research, Vol.37 (2013) 1302-1312. (SCI) (IF:4.6) (Q1, 1/34, Nuclear Science & Technology) (NSC99-2221-E-024-012) (first author) (Times Cited: 4)
  41. J.J. Hwang*, J.K. Kuo, W. Wu, W.R. Chang, C.H. Lin, S.E. Wang, “Lifecycle performance assessment of fuel cell/battery electric vehicles”, International Journal of Hydrogen Energy, Vol.38 (2013) 3433-3446. (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (Times Cited: 75)
  42. J.K. Kuo*, J.J. Hwang, C.H. Lin, “Performance analysis of a stationary fuel cell thermoelectric cogeneration system”, Fuel Cells, Vol.12 (2012) 1104-1114. (SCI) (IF: 2.8) (Q3, 22/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 7)
  43. P.H. Huang*, J.K. Kuo, “Atomistic simulations of solid-state pressure welding of metallic nanowires”, Applied Physics A: Materials Science & Processing, Vol.109 (2012) 561-569. (SCI) (IF:2.7) (Q2, 77/159, Physics, Applied) (Times Cited: 22)
  44. J.J. Hwang, W.R. Chang, J.K Kuo, W. Wu, “Experimental study on performance of a planar membrane humidifier for a proton exchange membrane fuel cell stack”, Journal of Power Sources, Vol.215 (2012) 69-76. (SCI) (IF:9.2) (Q1, 4/30, Electrochemistry) (Times Cited: 39)
  45. J.J. Hwang, P.C. Wang, J.K. Kuo*, “Simulation and experiment of a cogeneration system based on proton exchange membrane fuel cell”, Fuel Cells, Vol.12 (2012) 326-334. (SCI) (IF: 2.8) (Q3, 22/30, Electrochemistry) (corresponding author) (Times Cited: 17)
  46. J.J. Hwang, Y.J. Chen, J.K. Kuo*, “The study on the power management system in a fuel cell hybrid vehicle”, International Journal of Hydrogen Energy, Vol.37 (2012) 4476-4489. (NSC99-2221-E-024-012) (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (corresponding author) (Times Cited: 121)
  47. J.K. Kuo*, J.K. Wang, “Characteristic simulation with various anode support thicknesses of membrane electrode assembly in SOFC”, Journal of Solid State Electrochemistry, Vol.16 (2012) 329-340. (NSC 99-2221-E-024-012) (SCI) (IF: 2.5) (Q4, 24/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 9)
  48. C.T. Lin, J.K. Kuo, T.H. Yen*, “Three-dimensional molecular dynamics study of aperture shape effect on nanojet ejection”, Journal of the Chinese Institute of Engineers, Vol.34 (2011) 1001-1011. (NSC 99-2221-E-024-012) (SCI) (IF:1.1) (Q4, 75/90, Engineering, Multidisciplinary) (Times Cited: 3)
  49. J.K. Kuo*, P.H. Huang, S.M. Chang, “Displacement impact on PEM fuel cell bipolar plate for S316L fiber orientation and cooling system”, Journal of The Chinese Society of Mechanical Engineers, Vol.32 (2011) 409-417. (NSC 99-2221-E-024-012) (SCI) (IF:0.2) (Q4, 135/135, Engineering, Mechanical) (first author) (corresponding author) (Times Cited: 1)
  50. J.K. Kuo*, C.F. Wang, “An integrated simulation model for PEM fuel cell power systems with a buck DC-DC converter”, International Journal of Hydrogen Energy, Vol.36 (2011) 11846-11855. (NSC 99-2221-E-024-012) (SCI) (IF:7.2) (Q1, 7/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 57)
  51. P.H. Huang*, J.K. Kuo, “Thermal stretching of defective nanowires: the coupled effects of vacancy cluster defects, operating temperature, and wire cross-sectional area”, Applied Physics A: Materials Science & Processing, Vol.103 (2011) 1083-1092. (NSC 99-2221-E-020-015) (SCI) (IF:2.7) (Q2, 77/159, Physics, Applied) (Times Cited: 22)
  52. J.K. Kuo*, “Numerical investigation into thermofluidic and electrochemical characteristics of tubular-type SOFC”, Fuel Cells, Vol.10 (2010) 463-471.  (NSC97-2221-E-024-006) (SCI) (IF: 2.8) (Q3, 22/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 4)
  53. C.W. Chang-Jian*, J.K. Kuo, “Bifurcation and chaos for porous squeeze film damper mounted rotor–bearing system lubricated with micropolar fluid”, Nonlinear Dynamics, Vol.58 (2009) 697-714. (SCI) (IF:5.6) (Q1, 13/137, Mechanics) (Times Cited: 12)
  54. C. T. Lin, J.K. Kuo, T. H. Yen*, “Quantum Fluid Dynamics and Quantum Computational Fluid Dynamics”, Journal of Computational and Theoretical Nanoscience, Vol.6 (2009) 1090-1108. (NSC95-2221-E-432-002) (SCI) (IF:1.666) (Q2, 67/145, Physics, Applied) (Times Cited: 2)
  55. T.H. Yen, J.K. Kuo, Y.T. Yang*, “Comparison of heat transfer coefficient in the backward-facing step flow with the LBM and field synergy principle”, Journal of the Chinese Society of Mechanical Engineers, Vol.30 (2009) 125-134. (NSC95- 2221-E-432-002) (SCI) (IF:0.2) (Q4, 135/135, Engineering, Mechanical) (Times Cited: 3)
  56. J.K. Kuo*, C.K. Chen, “Numerical investigation of the performance and transport phenomena of a proton-exchange membrane fuel cell with a wavelike gas flow channel design”, Journal of Applied Polymer Science, Vol.111 (2009) 1440-1448. (NSC97-2221-E-024-006) (SCI) (IF:3.0) (Q2, 43/86, Polymer Science) (first author) (corresponding author) (Times Cited: 3)
  57. J.K. Kuo*, T.S. Yen, C.K. Chen, “Improvement of performance of gas flow channel in PEM fuel cells”, Energy Conversion and Management, Vol.49 (2008) 2776-2787. (NSC96-2221-E-006-MY3) (SCI) (IF:10.4) (Q1, 3/137, Mechanics) (first author) (corresponding author) (Times Cited: 133)
  58. J.K. Kuo*, C.K. Chen, “Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels”, Journal of Power Sources Vol.177 (2008) 96-103. (SCI) (IF:9.2) (Q1, 4/30, Electrochemistry) (first author) (corresponding author) (Times Cited: 158)
  59. J.K. Kuo*, C.K. Chen, “The effects of buoyancy on the performance of a PEM fuel cell with a wave-like gas flow channel design by numerical investigation”, International Journal of Heat and Mass Transfer, Vol.50 (2007) 4166-4179. (SCI) (IF: 5.2) (Q1, 17/137, Mechanics) (first author) (corresponding author) (Times Cited: 83)
  60. J.K. Kuo, C.K. Chen*, “Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle”, Journal of Power Sources, Vol.162 (2006) 1122-1129. (SCI) (IF:9.2) (Q1, 4/30, Electrochemistry) (first author) (Times Cited: 99)
  61. J.K. Kuo, C.K. Chen*, “A novel Nylon-6-S316L fiber compound material for injection molded PEM fuel cell bipolar plates”, Journal of Power Sources, Vol.162 (2006) 207-214. (SCI) (IF:9.2) (Q1, 4/30, Electrochemistry) (first author) (Times Cited: 101)
  62. C.K. Chen*, J.K. Kuo, “Nylon 6/CB polymeric conductive plastic bipolar plates for PEM fuel cells”, Journal of Applied Polymer Science, Vol.101 (2006) 3415-3421. (SCI) (IF:3.0) (Q2, 43/86, Polymer Science) (Times Cited: 25)
  63. S.S. Hsieh*, J.K. Kuo, S.H. Yang, C.F. Hwang, H.H. Tsai, “Study of operational parameters on the performance of micro PEMFCs with different flow fields”, Energy Conversion & Management, Vol.47 (2006) 1868-1878. (SCI) (IF: 10.4) (Q1, 3/137, Mechanics) (Times Cited: 112)
  64. S.S. Hsieh*, C.F. Hwang, J.K. Kuo, H.H. Tsai, “SU-8 flow field plates for a micro PEMFC”, Journal of Solid State Electrochemistry, Vol.9 (2005) 121-131. (SCI) (IF: 2.5) (Q4, 24/30, Electrochemistry) (Times Cited: 49)
  65. S.S. Hsieh*, J.K. Kuo, C.F. Hwang, H.H. Tsai, “A novel design and microfabrication for a micro PEMFC”, Microsystem Technologies, Vol. 10 (2004) 121-126. (SCI) (IF: 2.1) (Q3, Physics, Applied) (Times Cited: 72)
瀏覽數: