期刊論文(楊政融老師)
● International Journal-SCI
Corresponding Author *
Thangavel Sangeetha, Wei-Mon Yan, Yi-Shiuan Wu, Chun-Chen Yang, Po-Tuan Chen*, Cheng-Jung Yang*, “Suppressing Anodic Degradation of Lithium-Ion Batteries by Sinusoidal Waveform Charging Method”, IEEE Access, Vol. 12, pp. 59996 - 60003, 2024.
K. David Huang, Po-Tuan Chen, Wei-Mon Yan, Thangavel Sangeetha*, Cheng-Jung Yang*, “Perspective of Material Evolution Induced by Sinusoidal Reflex Charging in Lithium-Ion Batteries”, Heliyon, Vol. 10, No. 10, 102616, 2024.
K. David Huang, Nguyen Minh Khoa, Cheng-Jung Yang*, Po-Tuan Chen*, “Theoretical simulation of steady flowing manifold in hybrid pneumatic power system”, Thermal Science and Engineering Progress, Vol. 51, E30471, 2024.
Po-Tuan Chen, Cheng-Jung Yang*, “Using Taguchi Method and Grey Relational Analysis to Enhance Manufacturing Performance in Photopolymerization,” early access in Progress in Additive Manufacture, April 02, 2024.
Cheng-Jung Yang*, Hua-Chen Shih, Tim de Ancos, “Comparison of Human Health, Energy Consumption, and Carbon Emission with Virgin and Recycled Filament in Fused Deposition Modeling Printing,” Materials Today Sustainability, Vol. 25, 100640, 2024.
K. David Huang, Nguyen Minh Khoa, Cheng-Jung Yang*, Po-Tuan Chen*, “Determination of Flowing Electrolyte Parameters in a Zinc-Air Fuel Cell by the Taguchi Method”, International Journal of Energy Research, Vol. 2023, 2023.
Cheng-Jung Yang*, Sin-Syuan Wu, “Comprehensive performance of a low-cost spring-assisted mechanism for digital light processing,” International Journal of Advanced Manufacturing Technology, Vol. 125, pp. 4099-4118, 2023.
Cheng-Jung Yang, Wei-Kai Huang, Keng-Pei Lin*, “3D-Printing Quality Inspection Based on Transfer Learning with Convolutional Neural Networks”, Sensors, Vol 23, No. 1, 2023.
Cheng-Jung Yang, Mei-Jyun Lin, Po-Tuan Chen, Hsin-Lin Chiu*, “Circular Economy in Practice: Building a Simple Greenhouse from Recycled Plastic,” Machines, Vol 10, No. 12, 2022.
Cheng-Jung Yang*, Sin-Syuan Wu, “Sustainable Manufacturing Decisions through the Optimization of Printing Parameters in 3D Printing,” Applied Sciences, Vol 12, No. 19, 2022.
Cheng-Jung Yang*, “Optimizing Manufacturing Parameters of DLP Machine by Taguchi Method and Desirability Approach,” Machines, Vol 10, No. 10, 2022.
K. David Huang, Zhong-Ting Cao, Jyun-Ming Jhang, Cheng-Jung Yang*, Po-Tuan Chen*, “Parameter Improvement of Composite Sinusoidal Waveform Charging Strategy for Reviving Lithium-ion Batteries Capacity”, Journal of Chinese Society of Mechanical Engineers, Vol. 43, No. 3, pp. 209-216, 2022.
Cheng-Jung Yang*, Lin Mei Jyun, Jahau Lewis Chen, “Multi-disciplinary optimization approach to eco-friendly de-sign using response surface method,” Applied Sciences, Vol 12, No. 6, 2022.
Cheng-Jung Yang*, “Accelerated Quality Improvement of 3D Printed Objects based on a Case-Based Reasoning System,” International Journal of Advanced Manufacturing Technology, Vol. 119, pp. 4599-4612, 2022.
Nguyen Minh Khoa, Thangavel Sangeetha, Po-Tuan Chen, Ting-Wei Hsu, Wei-Mon Yan, Cheng-Jung Yang* and K. David Huang, “High performance zinc–air fuel cell with zinc particle fuel and flowing electrolyte”, Journal of the Chinese Institute of Engineers, Vol 44, No. 8, 2021.
K. David Huang, Cheng-Jung Yang*, Po-Tuan Chen, “Fluidity and Penetration Efficiency of Zn Particles on the Electrochemical Reactions of Zn-Air Fuel cells”, Journal of the Chinese Institute of Engineers, Vol 44, No. 3, 2021.
Cheng-Jung Yang, Ming-Huang Chen, Keng-Pei Lin*, Yu-Jie Cheng, Fu-Chi Cheng, “Importing Automated Management System to Improve the Process Efficiency of Dental Laboratories”, Sensors, Vol 20, No. 20, 2020.
Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Development of Energy Control System for Parallel Hybrid Power System using Dynamic Equations and Fuzzy Theory”, Advances in Mechanical Engineering, Vol 12, No. 11, 2020.
Tung-Yuan Yung; Thangavel Sangeeth; Wei-Mon Yan; Cheng-Jung Yang*; Po-Tuan Chen*, “Non-precious and accessible nanocomposite of iron oxide on PDDA-Modified graphene for catalyzing oxygen reduction reaction,” Journal of Power Sources Advances, Vol 5, 2020.
Thangavel Sangeetha, Wei-Mon Yan, Po-Tuan Chen*, Cheng-Jung Yang*, K. David Huang*, “Protection Efficiencies of Surface-Active Inhibitors in Zn-Air Batteries”, International Journal of Energy Research, Vol. 44, No. 14, pp. 11883-11893, 2020.
Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Dynamic Simulation and Control of a new Parallel Hybrid Power System”, Applied Sciences, Vol 10, No. 16, 2020.
Thangavel Sangeetha, Wei-Mon Yan, Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Electrochemical polarization analysis for optimization of external operation parameters in zinc fuel cells”, RSC Advances, Vol.10, pp. 28807-28818, 2020.
Chia-Hung Chou, Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Functionalization of Wireless Control and Fuzzy Systems to Hybrid Mini-Loaders”, IEEE Access, Vol. 8, No. 1, pp. 80914-80921, 2020.
Thangavel Sangeetha†; Cheng-Jung Yang†, Po-Tuan Chen†, Wei-Mon Yan*, K. David Huang*, “Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4543-4555, 2020. †These authors contributed equally to this work.
Cheng-Jung Yang, Po-Tuan Chen*, K. David Huang*, “The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4224-4234, 2020.
Po-Tuan Chen, Fu-Yen Zeng, Xuan-Hao Zhang, Ren-Jei Chung, Cheng-Jung Yang*, K. David Huang*, “Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging Lithium-ion Batteries”, Energies, Vol 13, No. 4, 2020.
Po-Tuan Chen, Pei-Fan Ding, Cheng-Jung Yang*, K. David Huang*, “Hybrid Power System Design for Multifunctional Mini-Loader Vehicles”, Applied Sciences, Vol 9, No. 20, 2019.
Cheng-Jung Yang, Tzu-Chun Yang, Po-Tuan Chen*, K. David Huang*, “An innovative design of regional air-conditioning to increase automobile cabin energy efficiency”, Energies, Vol 12, No. 12, 2019.
Po-Tuan Chen, Duong Dinh Nghia, Cheng-Jung Yang*, K. David Huang*, “Study of system integral energy efficiency of a hybrid pneumatic power system”, Applied Sciences, Vol 9, No. 11, 2019.
Yu-Sheng Lin, Cheng-Jung Yang*, “Spring Assisting Mechanism for Enhancing the Separation Performance of Digital Light Process 3D Printers”, IEEE Access, Vol. 7, No. 1, pp. 71718-71729, 2019.
Po-Tuan Chen; Thangavel Sangeetha; Ting-Wei Hsue; Cheng-Jung Yang; Tung-Yuan Yung; Wei-Mon Yan*; K.David Huang*, “Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte”, Chemical Physics Letters, Vol. 728, pp.160-166, 2019.
Po-Tuan Chen; Da-Jyun Shen; Cheng-Jung Yang*; K. David Huang*, “Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control”, Applied Sciences, Vol 9, No. 9, 2019.
Po-Tuan Chen; Ping-Hao Pai; Cheng-Jung Yang*; K. David Huang*, “Development of Transmission Systems for Parallel Hybrid Electric Vehicles”, Applied Sciences, Vol 9, No. 8, 2019.
Cheng Jung Yang; Jahau Lewis Chen*, “Forecasting the Design of Eco-Products by Integrating TRIZ Evolution Patterns with CBR and Simple LCA Methods,” Expert Systems with Applications, Vol.39, No. 3 pp. 2884-2892, 2012.
● International Journal-Non SCI
Cheng-Jung Yang*; Ci-Hao Wang; Ying-Chieh Lee; Meng-Hao Tsai, “Recycled Plastic Composite Rod-based Design of Fasteners in the Simplified Greenhouse”, International Journal of Materials, Mechanics and Manufacturing (IJMMM), Vol. 7, No. 5, pp. 210-213, 2019. (IET Inspec, EI)
Cheng-Jung Yang*; Yu-Sheng Lin; Guan-Lin Chen; Qi-Jun Xiao, “Predicting the separation time of semi-passive mechanism in DLP machine by CBR method”, Journal of Automation and Control Engineering (JOACE), Vol. 7, No. 1, pp.63-67, 2019.
Yu-Jie Cheng; Ming-Huang Chen; Fu-Chi Cheng; Yu-Chi Cheng; Yu-Sheng Lin; Cheng-Jung Yang*, “Developing a Decision Support System (DSS) for a Dental Manufacturing Production Line based on Data Mining”, Applied System Innovation(ASI), Vol. 1, No. 17, 2018.
Cheng-Jung Yang*, “Utilizing CBR Method in Parameter Planning for FDM process of 3D printing,” International Journal of Engineering and Innovative Technology (IJEIT), Vol. 7, No. 9, 2018.
Yu-Sheng Lin; Cheng-Jung Yang*, “Design and Fabrication of a Self-adjusted Mechanism in Combination with Passive Peeling for Effective Separation used in Digital Light Processing (DLP) 3D printing,” International Journal of Mechanical And Production Engineering (IRAJ), Vol.5, No.3, pp.10-14, 2017.
Cheng Jung Yang; Jahau Lewis Chen*, “Energy-saving Eco-innovation Using Eco-product Cases with CBR and TRIZ Tools,” Journal of the Chinese Society of Mechanical Engineers, Vol.33, No.4, pp.305-313, 2012.
Cheng Jung Yang*; Jahau Lewis Chen, “Accelerating Preliminary Eco-innovation Design for Products that Integrates Case-Based Reasoning and TRIZ method,” Journal of Cleaner Production, Vol.19, No. 9-10, pp. 998-1006, 2011.
● Domestic Journal
林盈兆、張育堯、楊政融*， “利用田口方法建構下照式光固化三維列印機台最小分離力參數”，精密機械與製造科技期刊，第8卷，第2期，18-27頁，2018。
Corresponding Author *
Thangavel Sangeetha, Wei-Mon Yan, Yi-Shiuan Wu, Chun-Chen Yang, Po-Tuan Chen*, Cheng-Jung Yang*, “Suppressing Anodic Degradation of Lithium-Ion Batteries by Sinusoidal Waveform Charging Method”, IEEE Access, Vol. 12, pp. 59996 - 60003, 2024.
K. David Huang, Po-Tuan Chen, Wei-Mon Yan, Thangavel Sangeetha*, Cheng-Jung Yang*, “Perspective of Material Evolution Induced by Sinusoidal Reflex Charging in Lithium-Ion Batteries”, Heliyon, Vol. 10, No. 10, 102616, 2024.
K. David Huang, Nguyen Minh Khoa, Cheng-Jung Yang*, Po-Tuan Chen*, “Theoretical simulation of steady flowing manifold in hybrid pneumatic power system”, Thermal Science and Engineering Progress, Vol. 51, E30471, 2024.
Po-Tuan Chen, Cheng-Jung Yang*, “Using Taguchi Method and Grey Relational Analysis to Enhance Manufacturing Performance in Photopolymerization,” early access in Progress in Additive Manufacture, April 02, 2024.
Cheng-Jung Yang*, Hua-Chen Shih, Tim de Ancos, “Comparison of Human Health, Energy Consumption, and Carbon Emission with Virgin and Recycled Filament in Fused Deposition Modeling Printing,” Materials Today Sustainability, Vol. 25, 100640, 2024.
K. David Huang, Nguyen Minh Khoa, Cheng-Jung Yang*, Po-Tuan Chen*, “Determination of Flowing Electrolyte Parameters in a Zinc-Air Fuel Cell by the Taguchi Method”, International Journal of Energy Research, Vol. 2023, 2023.
Cheng-Jung Yang*, Sin-Syuan Wu, “Comprehensive performance of a low-cost spring-assisted mechanism for digital light processing,” International Journal of Advanced Manufacturing Technology, Vol. 125, pp. 4099-4118, 2023.
Cheng-Jung Yang, Wei-Kai Huang, Keng-Pei Lin*, “3D-Printing Quality Inspection Based on Transfer Learning with Convolutional Neural Networks”, Sensors, Vol 23, No. 1, 2023.
Cheng-Jung Yang, Mei-Jyun Lin, Po-Tuan Chen, Hsin-Lin Chiu*, “Circular Economy in Practice: Building a Simple Greenhouse from Recycled Plastic,” Machines, Vol 10, No. 12, 2022.
Cheng-Jung Yang*, Sin-Syuan Wu, “Sustainable Manufacturing Decisions through the Optimization of Printing Parameters in 3D Printing,” Applied Sciences, Vol 12, No. 19, 2022.
Cheng-Jung Yang*, “Optimizing Manufacturing Parameters of DLP Machine by Taguchi Method and Desirability Approach,” Machines, Vol 10, No. 10, 2022.
K. David Huang, Zhong-Ting Cao, Jyun-Ming Jhang, Cheng-Jung Yang*, Po-Tuan Chen*, “Parameter Improvement of Composite Sinusoidal Waveform Charging Strategy for Reviving Lithium-ion Batteries Capacity”, Journal of Chinese Society of Mechanical Engineers, Vol. 43, No. 3, pp. 209-216, 2022.
Cheng-Jung Yang*, Lin Mei Jyun, Jahau Lewis Chen, “Multi-disciplinary optimization approach to eco-friendly de-sign using response surface method,” Applied Sciences, Vol 12, No. 6, 2022.
Cheng-Jung Yang*, “Accelerated Quality Improvement of 3D Printed Objects based on a Case-Based Reasoning System,” International Journal of Advanced Manufacturing Technology, Vol. 119, pp. 4599-4612, 2022.
Nguyen Minh Khoa, Thangavel Sangeetha, Po-Tuan Chen, Ting-Wei Hsu, Wei-Mon Yan, Cheng-Jung Yang* and K. David Huang, “High performance zinc–air fuel cell with zinc particle fuel and flowing electrolyte”, Journal of the Chinese Institute of Engineers, Vol 44, No. 8, 2021.
K. David Huang, Cheng-Jung Yang*, Po-Tuan Chen, “Fluidity and Penetration Efficiency of Zn Particles on the Electrochemical Reactions of Zn-Air Fuel cells”, Journal of the Chinese Institute of Engineers, Vol 44, No. 3, 2021.
Cheng-Jung Yang, Ming-Huang Chen, Keng-Pei Lin*, Yu-Jie Cheng, Fu-Chi Cheng, “Importing Automated Management System to Improve the Process Efficiency of Dental Laboratories”, Sensors, Vol 20, No. 20, 2020.
Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Development of Energy Control System for Parallel Hybrid Power System using Dynamic Equations and Fuzzy Theory”, Advances in Mechanical Engineering, Vol 12, No. 11, 2020.
Tung-Yuan Yung; Thangavel Sangeeth; Wei-Mon Yan; Cheng-Jung Yang*; Po-Tuan Chen*, “Non-precious and accessible nanocomposite of iron oxide on PDDA-Modified graphene for catalyzing oxygen reduction reaction,” Journal of Power Sources Advances, Vol 5, 2020.
Thangavel Sangeetha, Wei-Mon Yan, Po-Tuan Chen*, Cheng-Jung Yang*, K. David Huang*, “Protection Efficiencies of Surface-Active Inhibitors in Zn-Air Batteries”, International Journal of Energy Research, Vol. 44, No. 14, pp. 11883-11893, 2020.
Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Dynamic Simulation and Control of a new Parallel Hybrid Power System”, Applied Sciences, Vol 10, No. 16, 2020.
Thangavel Sangeetha, Wei-Mon Yan, Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Electrochemical polarization analysis for optimization of external operation parameters in zinc fuel cells”, RSC Advances, Vol.10, pp. 28807-28818, 2020.
Chia-Hung Chou, Po-Tuan Chen, Cheng-Jung Yang*, K. David Huang*, “Functionalization of Wireless Control and Fuzzy Systems to Hybrid Mini-Loaders”, IEEE Access, Vol. 8, No. 1, pp. 80914-80921, 2020.
Thangavel Sangeetha†; Cheng-Jung Yang†, Po-Tuan Chen†, Wei-Mon Yan*, K. David Huang*, “Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4543-4555, 2020. †These authors contributed equally to this work.
Cheng-Jung Yang, Po-Tuan Chen*, K. David Huang*, “The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4224-4234, 2020.
Po-Tuan Chen, Fu-Yen Zeng, Xuan-Hao Zhang, Ren-Jei Chung, Cheng-Jung Yang*, K. David Huang*, “Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging Lithium-ion Batteries”, Energies, Vol 13, No. 4, 2020.
Po-Tuan Chen, Pei-Fan Ding, Cheng-Jung Yang*, K. David Huang*, “Hybrid Power System Design for Multifunctional Mini-Loader Vehicles”, Applied Sciences, Vol 9, No. 20, 2019.
Cheng-Jung Yang, Tzu-Chun Yang, Po-Tuan Chen*, K. David Huang*, “An innovative design of regional air-conditioning to increase automobile cabin energy efficiency”, Energies, Vol 12, No. 12, 2019.
Po-Tuan Chen, Duong Dinh Nghia, Cheng-Jung Yang*, K. David Huang*, “Study of system integral energy efficiency of a hybrid pneumatic power system”, Applied Sciences, Vol 9, No. 11, 2019.
Yu-Sheng Lin, Cheng-Jung Yang*, “Spring Assisting Mechanism for Enhancing the Separation Performance of Digital Light Process 3D Printers”, IEEE Access, Vol. 7, No. 1, pp. 71718-71729, 2019.
Po-Tuan Chen; Thangavel Sangeetha; Ting-Wei Hsue; Cheng-Jung Yang; Tung-Yuan Yung; Wei-Mon Yan*; K.David Huang*, “Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte”, Chemical Physics Letters, Vol. 728, pp.160-166, 2019.
Po-Tuan Chen; Da-Jyun Shen; Cheng-Jung Yang*; K. David Huang*, “Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control”, Applied Sciences, Vol 9, No. 9, 2019.
Po-Tuan Chen; Ping-Hao Pai; Cheng-Jung Yang*; K. David Huang*, “Development of Transmission Systems for Parallel Hybrid Electric Vehicles”, Applied Sciences, Vol 9, No. 8, 2019.
Cheng Jung Yang; Jahau Lewis Chen*, “Forecasting the Design of Eco-Products by Integrating TRIZ Evolution Patterns with CBR and Simple LCA Methods,” Expert Systems with Applications, Vol.39, No. 3 pp. 2884-2892, 2012.
● International Journal-Non SCI
Cheng-Jung Yang*; Ci-Hao Wang; Ying-Chieh Lee; Meng-Hao Tsai, “Recycled Plastic Composite Rod-based Design of Fasteners in the Simplified Greenhouse”, International Journal of Materials, Mechanics and Manufacturing (IJMMM), Vol. 7, No. 5, pp. 210-213, 2019. (IET Inspec, EI)
Cheng-Jung Yang*; Yu-Sheng Lin; Guan-Lin Chen; Qi-Jun Xiao, “Predicting the separation time of semi-passive mechanism in DLP machine by CBR method”, Journal of Automation and Control Engineering (JOACE), Vol. 7, No. 1, pp.63-67, 2019.
Yu-Jie Cheng; Ming-Huang Chen; Fu-Chi Cheng; Yu-Chi Cheng; Yu-Sheng Lin; Cheng-Jung Yang*, “Developing a Decision Support System (DSS) for a Dental Manufacturing Production Line based on Data Mining”, Applied System Innovation(ASI), Vol. 1, No. 17, 2018.
Cheng-Jung Yang*, “Utilizing CBR Method in Parameter Planning for FDM process of 3D printing,” International Journal of Engineering and Innovative Technology (IJEIT), Vol. 7, No. 9, 2018.
Yu-Sheng Lin; Cheng-Jung Yang*, “Design and Fabrication of a Self-adjusted Mechanism in Combination with Passive Peeling for Effective Separation used in Digital Light Processing (DLP) 3D printing,” International Journal of Mechanical And Production Engineering (IRAJ), Vol.5, No.3, pp.10-14, 2017.
Cheng Jung Yang; Jahau Lewis Chen*, “Energy-saving Eco-innovation Using Eco-product Cases with CBR and TRIZ Tools,” Journal of the Chinese Society of Mechanical Engineers, Vol.33, No.4, pp.305-313, 2012.
Cheng Jung Yang*; Jahau Lewis Chen, “Accelerating Preliminary Eco-innovation Design for Products that Integrates Case-Based Reasoning and TRIZ method,” Journal of Cleaner Production, Vol.19, No. 9-10, pp. 998-1006, 2011.
● Domestic Journal
林盈兆、張育堯、楊政融*， “利用田口方法建構下照式光固化三維列印機台最小分離力參數”，精密機械與製造科技期刊，第8卷，第2期，18-27頁，2018。
瀏覽數:
分享
